# changelog

author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-8
changelog:
  - conf: Don't crash on invalid chardev source definition of RNGs and other (rhbz#1012196)
  - rpc: Increase bound limit for virDomainGetJobStats (rhbz#1012818)
  - qemu: Free all driver data in qemuStateCleanup (rhbz#1011330)
  - qemu: Don't leak reference to virQEMUDriverConfigPtr (rhbz#1011330)
  - qemu: Eliminate redundant if clauses in qemuCollectPCIAddress (rhbz#1003983)
  - qemu: Allow some PCI devices to be attached to PCIe slots (rhbz#1003983)
  - qemu: Replace multiple strcmps with a switch on an enum (rhbz#1003983)
  - qemu: Support ich9-intel-hda audio device (rhbz#1003983)
  - qemu: Turn if into switch in qemuDomainValidateDevicePCISlotsQ35 (rhbz#1003983)
  - qemu: Prefer to put a Q35 machine's dmi-to-pci-bridge at 00:1E.0 (rhbz#1003983)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-9
changelog:
  - virNetDevBandwidthEqual: Make it more robust (rhbz#1014503)
  - qemu_hotplug: Allow QoS update in qemuDomainChangeNet (rhbz#1014503)
  - qemu: Check actual netdev type rather than config netdev type during init (rhbz#1012824)
  - Fix crash in libvirtd when events are registered & ACLs active (CVE-2013-4399) (rhbz#1011429)
  - Remove virConnectPtr arg from virNWFilterDefParse* (rhbz#1015108)
  - Don't pass virConnectPtr in nwfilter 'struct domUpdateCBStruct' (rhbz#1015108)
  - Remove use of virConnectPtr from all remaining nwfilter code (rhbz#1015108)
  - Don't set netdev offline in container cleanup (rhbz#1014604)
  - Avoid reporting an error if veth device is already deleted (rhbz#1014604)
  - Avoid deleting NULL veth device name (rhbz#1014604)
  - Retry veth device creation on failure (rhbz#1014604)
  - Use 'vnet' as prefix for veth devices (rhbz#1014604)
  - Free cmd in virNetDevVethDelete (rhbz#1014604)
  - Free cmd in virNetDevVethCreate (rhbz#1014604)
  - LXC: Fix handling of RAM filesystem size units (rhbz#1015689)
  - build: Add lxc testcase to dist list (rhbz#1015689)
  - tests: Work with older dbus (rhbz#1018730)
  - virdbus: Add virDBusHasSystemBus() (rhbz#1018730)
  - virsystemd: Don't fail to start VM if DBus isn't available or compiled in (rhbz#1018730)
  - DBus: Introduce virDBusIsServiceEnabled (rhbz#1018730)
  - Change way we fake dbus method calls (rhbz#1018730)
  - Fix virsystemdtest for previous commit (rhbz#1018730)
  - LXC: Workaround machined uncleaned data with containers running systemd. (rhbz#1018730)
  - Allow use of a private dbus bus connection (rhbz#998365)
  - Add a method for closing the dbus system bus connection (rhbz#998365)
  - Make LXC controller use a private dbus connection & close it (rhbz#998365)
  - Fix flaw in detecting log format (rhbz#927072)
  - Fix exit status of lxc controller (rhbz#927072)
  - Improve error reporting with LXC controller (rhbz#927072)
  - nwfilter: Don't fail to start if DBus isn't available (rhbz#927072)
  - Don't ignore all dbus connection errors (rhbz#927072)
  - LXC: Check the existence of dir before resolving symlinks (rhbz#927072)
  - Ensure lxcContainerMain reports errors on stderr (rhbz#927072)
  - Ensure lxcContainerResolveSymlinks reports errors (rhbz#927072)
  - Improve log filtering in virLXCProcessReadLogOutputData (rhbz#927072)
  - Initialize threading & error layer in LXC controller (rhbz#1018725)
  - qemu_migration: Avoid crashing if domain dies too quickly (rhbz#1018267)
  - Convert uuid to a string before printing it (rhbz#1019023)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-10
changelog:
  - qemu_process: Make qemuProcessReadLog() more versatile and reusable (rhbz#1001738)
  - qemu: monitor: Add infrastructure to access VM logs for better err msgs (rhbz#1001738)
  - qemu: monitor: Produce better errors on monitor hangup (rhbz#1001738)
  - qemu: Wire up better early error reporting (rhbz#1001738)
  - qemu: process: Silence coverity warning when rewinding log file (rhbz#1001738)
  - qemu: hostdev: Refactor PCI passhrough handling (rhbz#1001738)
  - qemu: hostdev: Fix function spacing and header formatting (rhbz#1001738)
  - qemu: hostdev: Add checks if PCI passthrough is available in the host (rhbz#1001738)
  - qemu: Prefer VFIO for PCI device passthrough (rhbz#1001738)
  - qemu: Init @pcidevs in qemuPrepareHostdevPCIDevices (rhbz#1001738)
  - Fix max stream packet size for old clients (rhbz#950416)
  - Adjust legacy max payload size to account for header information (rhbz#950416)
  - rpc: Correct the wrong payload size checking (rhbz#950416)
  - qemu: Simplify calling qemuDomainHostdevNetConfigRestore (rhbz#1005682)
  - qemu: Move qemuDomainRemoveNetDevice to avoid forward reference (rhbz#1005682)
  - qemu: Fix removal of <interface type='hostdev'> (rhbz#1005682)
  - remote: Fix regression in event deregistration (rhbz#1020376)
  - qemu: managedsave: Add support for compressing managed save images (rhbz#1017227)
  - qemu: snapshot: Add support for compressing external snapshot memory (rhbz#1017227)
  - Migration: Introduce VIR_MIGRATE_PARAM_LISTEN_ADDRESS (rhbz#1015215)
  - virsocket: Introduce virSocketAddrIsWildcard (rhbz#1015215)
  - qemu: Implement support for VIR_MIGRATE_PARAM_LISTEN_ADDRESS (rhbz#1015215)
  - qemu_conf: Introduce "migration_address" (rhbz#1015215)
  - qemu: Include listenAddress in debug prints (rhbz#1015215)
  - docs: Expand description of host-model CPU mode (rhbz#1014682)
  - qemu: Avoid assigning unavailable migration ports (rhbz#1019237)
  - qemu: Make migration port range configurable (rhbz#1019237)
  - qemu: Fix augeas support for migration ports (rhbz#1019237)
  - Fix perms for virConnectDomainXML{To, From}Native (CVE-2013-4401)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-11
changelog:
  - Add helpers for getting env vars in a setuid environment (rhbz#1015247)
  - Only allow 'stderr' log output when running setuid (CVE-2013-4400)
  - Close all non-stdio FDs in virt-login-shell (CVE-2013-4400)
  - Don't link virt-login-shell against libvirt.so (CVE-2013-4400)
  - build: Fix linking virt-login-shell (rhbz#1015247)
  - build: Fix build of virt-login-shell on systems with older gnutls (rhbz#1015247)
  - Set a sane $PATH for virt-login-shell (rhbz#1015247)
  - spec: Fix rpm build when lxc disabled (rhbz#1015247)
  - Move virt-login-shell into libvirt-login-shell sub-RPM (rhbz#1015247)
  - Make virCommand env handling robust in setuid env (rhbz#1015247)
  - Remove all direct use of getenv (rhbz#1015247)
  - Block all use of getenv with syntax-check (rhbz#1015247)
  - Only allow the UNIX transport in remote driver when setuid (rhbz#1015247)
  - Don't allow remote driver daemon autostart when running setuid (rhbz#1015247)
  - Add stub getegid impl for platforms lacking it (rhbz#1015247)
  - Remove (nearly) all use of getuid()/getgid() (rhbz#1015247)
  - Block all use of libvirt.so in setuid programs (rhbz#1015247)
  - spec: Clean up distribution of ChangeLog (and others) (rhbz#1024393)
  - Push RPM deps down into libvirt-daemon-driver-XXXX sub-RPMs (rhbz#1024393)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-12
changelog:
  - virpci: Don't error on unbinded devices (rhbz#1019387)
  - network: Fix connections count in case of allocate failure (rhbz#1020135)
  - qemu: Clean up migration ports when migration cancelled (rhbz#1019237)
  - qemuMigrationBeginPhase: Check for 'drive-mirror' for NBD (rhbz#1022393)
  - Allow root directory in filesystem source dir schema (rhbz#1028107)
  - Use a port from the migration range for NBD as well (rhbz#1025699)
  - qemu: Avoid double free of VM (rhbz#1018267)
  - util: Use size_t instead of unsigned int for num_virtual_functions (rhbz#1025397)
  - pci: Properly handle out-of-order SRIOV virtual functions (rhbz#1025397)
  - conf: Do better job when comparing features ABI compatibility (rhbz#1008989)
  - schema: Rename option 'hypervtristate' to 'featurestate' (rhbz#1008989)
  - conf: Mark user provided strings in error messages when parsing XML (rhbz#1008989)
  - cpu: Add support for loading and storing CPU data (rhbz#1008989)
  - cpu: x86: Rename struct cpuX86cpuid as virCPUx86CPUID (rhbz#1008989)
  - cpu: x86: Rename struct cpuX86Data as virCPUx86Data (rhbz#1008989)
  - cpu: x86: Rename x86DataFree() as virCPUx86DataFree() (rhbz#1008989)
  - Ensure 'arch' is always set in cpuArchNodeData (rhbz#1008989)
  - cpu: x86: Rename x86MakeCPUData as virCPUx86MakeData (rhbz#1008989)
  - cpu: x86: Rename x86DataAddCpuid as virCPUx86DataAddCPUID (rhbz#1008989)
  - cpu: x86: Rename data_iterator and DATA_ITERATOR_INIT (rhbz#1008989)
  - cpu: x86: Fix return types of x86cpuidMatch and x86cpuidMatchMasked (rhbz#1008989)
  - cpu: x86: Use whitespace to clarify context and use consistent labels (rhbz#1008989)
  - cpu: x86: Clean up error messages in x86VendorLoad() (rhbz#1008989)
  - cpu: Export few x86-specific APIs (rhbz#1008989)
  - cpu: x86: Parse the CPU feature map only once (rhbz#1008989)
  - cpu_x86: Refactor storage of CPUID data to add support for KVM features (rhbz#1008989)
  - qemu: Add monitor APIs to fetch CPUID data from QEMU (rhbz#1008989)
  - cpu: x86: Add internal CPUID features support and KVM feature bits (rhbz#1008989)
  - conf: Refactor storing and usage of feature flags (rhbz#1008989)
  - qemu: Add support for paravirtual spinlocks in the guest (rhbz#1008989)
  - qemu: process: Validate specific CPUID flags of a guest (rhbz#1008989)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-13
changelog:
  - virsh-domain: Mark --live and --config mutually exclusive in vcpucount (rhbz#1024245)
  - virSecurityLabelDefParseXML: Don't parse label on model='none' (rhbz#1028962)
  - qemuMonitorIO: Don't use @mon after it's unrefed (rhbz#1018267)
  - qemu: Allow hotplug of multiple SCSI devices (rhbz#1031062)
  - qemu: Call qemuSetupHostdevCGroup later during hotplug (rhbz#1025108)
  - virscsi: Hostdev SCSI AdapterId retrieval fix (rhbz#1031079)
  - storage: Returns earlier if source adapter of the scsi pool is a HBA (rhbz#1027680)
  - spec: Restrict virt-login-shell usage (rhbz#1033614)
  - spec: Don't save/restore running VMs on libvirt-client update (rhbz#1033626)
  - Don't start a nested job in qemuMigrationPrepareAny (rhbz#1018267)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-14
changelog:
  - nodedev: Resolve Relax-NG validity error (rhbz#1035792)
  - test-lib: Make case skipping possible (rhbz#1034380)
  - tests: Don't test user config file if ran as root (rhbz#1034380)
  - Improve cgroups docs to cover systemd integration (rhbz#1004340)
  - Fix busy wait loop in LXC container I/O handling (rhbz#1032705)
  - tests: Guarantee abs_srcdir in all C tests (rhbz#1035403)
  - Introduce standard methods for sorting strings with qsort (rhbz#1035403)
  - Add virFileIsMountPoint function (rhbz#1035403)
  - Pull lxcContainerGetSubtree out into shared virfile module (rhbz#1035403)
  - Fix bug in identifying sub-mounts (rhbz#1035403)
  - LXC: Ensure security context is set when mounting images (rhbz#923903)
  - Ensure to zero out the virDomainBlockJobInfo arg (rhbz#1028846)
  - qemu: Default to vfio for nodedev-detach (rhbz#1035188)
  - daemon: Run virStateCleanup conditionally (rhbz#1033061)
  - qemu: Add "-boot strict" to commandline whenever possible (rhbz#1037593)
  - tests: Add forgotten boot-strict test files (rhbz#1037593)
  - conf: Fix XML formatting of RNG device info (rhbz#1035118)
  - qemu: Improve error when setting invalid count of vcpus via agent (rhbz#1035108)
  - Add qxl ram size to ABI stability check (rhbz#1035123)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-15
changelog:
  - spec: Don't save/restore running VMs on libvirt-client update (rhbz#1033626)
  - qemu: hotplug: Only label hostdev after checking device conflicts (rhbz#1025108)
  - qemu: hotplug: Fix double free on USB collision (rhbz#1025108)
  - qemu: hotplug: Fix adding USB devices to the driver list (rhbz#1025108)
  - docs: Enhance memoryBacking/locked documentation (rhbz#1035954)
  - util: Fix two virCompareLimitUlong bugs (rhbz#1024272)
  - cgroups: Redefine what "unlimited" means wrt memory limits (rhbz#1024272)
  - qemu: Report VIR_DOMAIN_MEMORY_PARAM_UNLIMITED properly (rhbz#1024272)
  - qemu: Fix minor inconsistency in error message (rhbz#1024272)
  - conf: Don't format memtune with unlimited values (rhbz#1024272)
  - qemu_process: Read errors from child (rhbz#1035955)
  - network: Properly update iptables rules during net-update (rhbz#1035336)
  - Tie SASL callbacks lifecycle to virNetSessionSASLContext (rhbz#1039991)
  - screenshot: Implement multiple screen support (rhbz#1026966)
  - Switch to private redhat namespace for QMP I/O error reason (rhbz#1026966)
  - Support virtio disk hotplug in JSON mode (rhbz#1026966)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-16
changelog:
  - qemu: Check for reboot-timeout on monitor (rhbz#1042690)
  - virsh: Fix return value error of cpu-stats (rhbz#1043388)
  - tools: Fix virsh connect man page (rhbz#1043260)
  - conf: Introduce generic ISA address (rhbz#996520)
  - conf: Add support for panic device (rhbz#996520)
  - qemu: Add support for -device pvpanic (rhbz#996520)
  - Fix invalid read in virNetSASLSessionClientStep debug log (rhbz#1043864)
  - virsh: man: Mention that volumes need to be in storage pool for undefine (rhbz#1044445)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-18
changelog:
  - qemu: Ask for -enable-fips when FIPS is required (rhbz#1035474)
  - qemu: Properly set MaxMemLock when hotplugging with VFIO (rhbz#1035490)
  - qemu: Avoid duplicate security label restore on hostdev attach failure (rhbz#1035490)
  - qemu: Re-add hostdev interfaces to hostdev array on libvirtd restart (rhbz#1045002)
  - domain: Don't try to interpret <driver> as virtio config for hostdev interfaces (rhbz#1046337)
  - virBitmapParse: Fix behavior in case of error and fix up callers (rhbz#1047234)
  - qemu: Fix live pinning to memory node on NUMA system (rhbz#1047234)
  - qemu: Clean up qemuDomainSetNumaParameters (rhbz#1047234)
  - qemu: Range check numa memory placement mode (rhbz#1047234)
  - virkeycode: Allow ANSI_A (rhbz#1044806)
  - Fix argument order of qemuMigrationPerformJob(). (rhbz#1049338)
  - qemu: Do not access stale data in virDomainBlockStats (CVE-2013-6458)
  - qemu: Avoid using stale data in virDomainGetBlockInfo (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockJobImpl (CVE-2013-6458)
  - qemu: Fix job usage in qemuDomainBlockCopy (rhbz#1048643)
  - qemu: Fix job usage in virDomainGetBlockIoTune (CVE-2013-6458)
  - PanicCheckABIStability: Need to check for existence (rhbz#996520)
  - virsh: Improve usability of '--print-xml' flag for attach-disk command (rhbz#1049529)
  - virsh: Don't use legacy API if --current is used on device hot(un)plug (rhbz#1049529)
  - virsh: Use inactive definition when removing disk from config (rhbz#1049529)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-19
changelog:
  - CVE-2013-6436: Fix crash in lxcDomainGetMemoryParameters (rhbz#1049137)
  - Fix crash in lxcDomainSetMemoryParameters (rhbz#1052062)
  - Don't crash if a connection closes early (CVE-2014-1447)
  - Really don't crash if a connection closes early (CVE-2014-1447)
  - qemu: Change the default unix monitor timeout (rhbz#892273)
  - virSecuritySELinuxSetFileconHelper: Don't fail on read-only NFS (rhbz#996543)
  - qemu: Avoid operations on NULL monitor if VM fails early (rhbz#1054785)
  - virt-login-shell: Fix regressions in behavior (rhbz#1015247)
  - pci: Make reattach work for unbound devices (rhbz#1046919)
  - pci: Fix failure paths in detach (rhbz#1046919)
  - qemu: Don't detach devices if passthrough doesn't work (rhbz#1046919)
  - Fix migration with QEMU 1.6 (rhbz#1053405)
  - build: More workarounds for if_bridge.h (rhbz#1042937)
  - build: Fix build with latest rawhide kernel headers (rhbz#1042937)
  - aarch64: Disable -fstack-protector. (rhbz#1042937)
  - AArch64: Parse cputopology from /proc/cpuinfo. (rhbz#1042937)
  - virDomainEventCallbackListFree: Don't leak @list->callbacks (rhbz#1047964)
  - Fix memory leak in virObjectEventCallbackListRemoveID() (rhbz#1047964)
  - event: Filter global events by domain:getattr ACL (CVE-2014-0028)
  - Doc: Improve the document for nodesuspend (rhbz#1045089)
  - Doc: Add "note" for node-memory-tune (rhbz#1045089)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-21
changelog:
  - util: Correct the NUMA node range checking (rhbz#1045958)
  - storage: Add document for possible problem on volume detection (rhbz#726797)
  - storage: Fix autostart of pool with "fc_host" type adapter (rhbz#726797)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-22
changelog:
  - Add a read/write lock implementation (rhbz#1034807)
  - Push nwfilter update locking up to top level (rhbz#1034807)
  - utils: Introduce functions for kernel module manipulation (rhbz#1045124)
  - virCommand: Introduce virCommandSetDryRun (rhbz#1045124)
  - tests: Add test for new virkmod functions (rhbz#1045124)
  - Honor blacklist for modprobe command (rhbz#1045124)
  - qemu: Be sure we're using the updated value of backend during hotplug (rhbz#1056360)
  - network: Permit upstream forwarding of unqualified DNS names (rhbz#1061099)
  - network: Only prevent forwarding of DNS requests for unqualified names (rhbz#1061099)
  - network: Change default of forwardPlainNames to 'yes' (rhbz#1061099)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-23
changelog:
  - Generate a valid imagelabel even for type 'none' (rhbz#1061657)
  - qemu: keep pre-migration domain state after failed migration (rhbz#1057407)
  - schema: Fix guest timer specification schema according to the docs (rhbz#1056205)
  - conf: Enforce supported options for certain timers (rhbz#1056205)
  - qemu: hyperv: Add support for timer enlightenments (rhbz#1056205)
  - build: correctly check for SOICGIFVLAN GET_VLAN_VID_CMD command (rhbz#1062665)
  - util: Add "shareable" field for virSCSIDevice struct (rhbz#957292)
  - util: Fix the indention (rhbz#957292)
  - qemu: Don't fail if the SCSI host device is shareable between domains (rhbz#957292)
  - util: Add one argument for several scsi utils (rhbz#957292)
  - tests: Add tests for scsi utils (rhbz#957292)
  - qemu: Fix the error message for scsi host device's shareable checking (rhbz#957292)
  - util: Accept test data path for scsi device's sg_path (rhbz#957292)
  - tests: Modify the scsi util tests (rhbz#957292)
  - event: move event filtering to daemon (regression fix) (rhbz#1047964)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-24
changelog:
  - Block info query: Add check for transient domain (rhbz#1065531)
  - Fix minor typos in messages and docs (rhbz#1045643)
  - LXC: Free variable vroot in lxcDomainDetachDeviceHostdevUSBLive() (rhbz#1045643)
  - LXC: free dst before lxcDomainAttachDeviceDiskLive returns (rhbz#1045643)
  - maint: fix comment typos (rhbz#1045643)
  - storage: avoid short reads while chasing backing chain (rhbz#1045643)
  - Don't block use of USB with containers (rhbz#1045643)
  - Fix path used for USB device attach with LXC (rhbz#1045643)
  - Record hotplugged USB device in LXC live guest config (rhbz#1045643)
  - Fix reset of cgroup when detaching USB device from LXC guests (rhbz#1045643)
  - Disks are always block devices, never character devices (rhbz#1045643)
  - Move check for cgroup devices ACL upfront in LXC hotplug (rhbz#1045643)
  - Add virFileMakeParentPath helper function (rhbz#1045643)
  - Add helper for running code in separate namespaces (rhbz#1045643)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC shutdown/reboot code (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC disk hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC USB hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC block hostdev hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC chardev hostdev hotplug (CVE-2013-6456)
  - CVE-2013-6456: Avoid unsafe use of /proc/$PID/root in LXC hotunplug code (CVE-2013-6456)
  - Ignore additional fields in iscsiadm output (rhbz#1067173)
  - qemuBuildNicDevStr: Set vectors= on Multiqueue (rhbz#1066209)
  - Don't depend on syslog.service (rhbz#1032695)
  - libvirt-guests: Run only after libvirtd (rhbz#1032695)
  - virSystemdCreateMachine: Set dependencies for slices (rhbz#1032695)
  - libvirt-guests: Wait for libvirtd to initialize (rhbz#1032695)
  - virNetServerRun: Notify systemd that we're accepting clients (rhbz#1032695)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-25
changelog:
  - maint: fix comma style issues: conf (rhbz#1032370)
  - Allow <source> for type=block to have no dev (rhbz#1032370)
  - Allow LUN type disks to have no source (rhbz#1032370)
  - virsh-volume: Unify strigification of volume type (rhbz#1032370)
  - conf: Refactor virDomainDiskSourcePoolDefParse (rhbz#1032370)
  - conf: Split out code to parse the source of a disk definition (rhbz#1032370)
  - conf: Rename virDomainDiskHostDefFree to virDomainDiskHostDefClear (rhbz#1032370)
  - conf: Refactor virDomainDiskSourceDefParse (rhbz#1032370)
  - storage: fix RNG validation of gluster via netfs (rhbz#1032370)
  - maint: fix comment typos. (rhbz#1032370)
  - storage: use valid XML for awkward volume names (rhbz#1032370)
  - build: Don't fail on '&lt; ' or '&gt; ' with old xmllint (rhbz#1032370)
  - storage: allow interleave in volume XML (rhbz#1032370)
  - storage: expose volume meta-type in XML (rhbz#1032370)
  - storage: initial support for linking with libgfapi (rhbz#1032370)
  - storage: document existing pools (rhbz#1032370)
  - storage: document gluster pool (rhbz#1032370)
  - storage: implement rudimentary glusterfs pool refresh (rhbz#1032370)
  - storage: add network-dir as new storage volume type (rhbz#1032370)
  - storage: improve directory support in gluster pool (rhbz#1032370)
  - storage: improve allocation stats reported on gluster files (rhbz#1032370)
  - storage: improve handling of symlinks in gluster (rhbz#1032370)
  - storage: probe qcow2 volumes in gluster pool (rhbz#1032370)
  - storage: fix typo in previous patch (rhbz#1032370)
  - conf: Export virStorageVolType enum helper functions (rhbz#1032370)
  - test: Implement fake storage pool driver in qemuxml2argv test (rhbz#1032370)
  - storage: reduce number of stat calls (rhbz#1032370)
  - storage: use simpler 'char *' (rhbz#1032370)
  - storage: refactor backing chain division of labor (rhbz#1032370)
  - storage: always probe type with buffer (rhbz#1032370)
  - storage: don't read storage volumes in nonblock mode (rhbz#1032370)
  - storage: skip selinux cleanup when fd not available (rhbz#1032370)
  - storage: use correct type for array count (rhbz#1032370)
  - storage: allow interleave in pool XML (rhbz#1032370)
  - qemuxml2argv: Add test to verify correct usage of disk type="volume" (rhbz#1032370)
  - qemuxml2argv: Add test for disk type='volume' with iSCSI pools (rhbz#1032370)
  - tests: Fix comment for fake storage pool driver (rhbz#1032370)
  - conf: Support disk source formatting without needing a virDomainDiskDefPtr (rhbz#1032370)
  - conf: Clean up virDomainDiskSourceDefFormatInternal (rhbz#1032370)
  - conf: Split out seclabel formating code for disk source (rhbz#1032370)
  - conf: Export disk source formatter and parser (rhbz#1032370)
  - snapshot: conf: Use common parsing and formatting functions for source (rhbz#1032370)
  - snapshot: conf: Fix NULL dereference when <driver> element is empty (rhbz#1032370)
  - conf: Add functions to copy and free network disk source definitions (rhbz#1032370)
  - qemu: snapshot: Detect internal snapshots also for sheepdog and RBD (rhbz#1032370)
  - conf: Add helper do clear disk source authentication struct (rhbz#1032370)
  - qemu: snapshot: Touch up error message (rhbz#1032370)
  - qemu: snapshot: Add functions similar to disk source pool translation (rhbz#1032370)
  - qemu: Refactor qemuTranslateDiskSourcePool (rhbz#1032370)
  - qemu: Split out formatting of network disk source URI (rhbz#1032370)
  - qemu: Simplify call pattern of qemuBuildDriveURIString (rhbz#1032370)
  - qemu: Use qemuBuildNetworkDriveURI to handle http/ftp and friends (rhbz#1032370)
  - qemu: Migrate sheepdog source generation into common function (rhbz#1032370)
  - qemu: Split out NBD command generation (rhbz#1032370)
  - qemu: Unify formatting of RBD sources (rhbz#1032370)
  - qemu: Refactor disk source string formatting (rhbz#1032370)
  - qemu: Clear old translated pool source (rhbz#1032370)
  - qemu: snapshots: Declare supported and unsupported snapshot configs (rhbz#1032370)
  - domainsnapshotxml2xmltest: Clean up labels and use bool instead of int (rhbz#1032370)
  - domainsnapshotxml2xmltest: Allow for better testing of snapshots (rhbz#1032370)
  - domainsnapshotxml2xml: Move files with conflicting names (rhbz#1032370)
  - domainsnapshotxml2xmltest: Add existing files as new tests (rhbz#1032370)
  - domainsnapshotxml2xmltest: Add test case for empty driver element (rhbz#1032370)
  - qemu: Fix indentation in qemuTranslateDiskSourcePool (rhbz#1032370)
  - qemu: snapshot: Fix incorrect disk type for auto-generated disks (rhbz#1032370)
  - storage: fix omitted slash in gluster volume URI (rhbz#1032370)
  - virsh: domain: Fix undefine with storage of 'volume' disks (rhbz#1032370)
  - snapshot: schema: Split out snapshot disk driver definition (rhbz#1032370)
  - storage: Add gluster pool filter and fix virsh pool listing (rhbz#1032370)
  - storage: fix bogus target in gluster volume xml (rhbz#1032370)
  - storage: Improve error message when a storage backend is missing (rhbz#1032370)
  - storage: Break long lines and clean up spaces in storage backend header (rhbz#1032370)
  - storage: Support deletion of volumes on gluster pools (rhbz#1032370)
  - qemu: snapshot: Avoid libvirtd crash when qemu crashes while snapshotting (rhbz#1032370)
  - qemu: snapshot: Forbid snapshots when backing is a scsi passthrough disk (rhbz#1034993)
  - qemu: Avoid crash in qemuDiskGetActualType (rhbz#1032370)
  - snapshot: Add support for specifying snapshot disk backing type (rhbz#1032370)
  - conf: Move qemuDiskGetActualType to virDomainDiskGetActualType (rhbz#1032370)
  - conf: Move qemuSnapshotDiskGetActualType to virDomainSnapshotDiskGetActualType (rhbz#1032370)
  - storage: Add file storage APIs in the default storage driver (rhbz#1032370)
  - storage: add file functions for local and block files (rhbz#1032370)
  - storage: Add storage file backends for gluster (rhbz#1032370)
  - qemu: Switch snapshot deletion to the new API functions (rhbz#1032370)
  - qemu: snapshot: Use new APIs to detect presence of existing storage files (rhbz#1032370)
  - qemu: snapshot: Add support for external active snapshots on gluster (rhbz#1032370)
  - storage: Fix build with older compilers afeter gluster snapshot series (rhbz#1032370)
  - storage: gluster: Don't leak private data when storage file init fails (rhbz#1032370)
  - spec: Use correct versions of libgfapi in RHEL builds (rhbz#1032370)
  - spec: Fix braces around macros (rhbz#1032370)
  - build: use --with-systemd-daemon as configure option (rhbz#1032695)
  - spec: require device-mapper-devel for storage-disk (rhbz#1032695)
  - spec: make systemd_daemon usage configurable (rhbz#1032695)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-26
changelog:
  - virNetDevVethCreate: Serialize callers (rhbz#1014604)
  - qemuBuildNicDevStr: Adapt to new advisory on multiqueue (rhbz#1071888)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-27
changelog:
  - spec: Let translations be properly updated (rhbz#1030368)
  - Update translation to supported languages (rhbz#1030368)
  - Add a mutex to serialize updates to firewall (rhbz#1074003)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-28
changelog:
  - qemu: Forbid "sgio" support for SCSI generic host device (rhbz#957292)
  - qemu: monitor: Fix invalid parentheses (rhbz#1075973)
  - qemu: Introduce qemuDomainDefCheckABIStability (rhbz#1076503)


author: Jiri Denemark <jdenemar@redhat.com> - 1.1.1-29
changelog:
  - nwfilter: Increase buffer size for libpcap (rhbz#1078347)
  - nwfilter: Display pcap's error message when pcap setup fails (rhbz#1078347)
  - nwfilter: Fix double free of pointer (rhbz#1071181)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.7-1
changelog:
  - Rebased to libvirt-1.2.7 (rhbz#1035158)
  - The rebase also fixes the following bugs:
      rhbz#823535, rhbz#872628, rhbz#874418, rhbz#878394, rhbz#880483
      rhbz#921094, rhbz#963817, rhbz#964177, rhbz#967493, rhbz#967494
      rhbz#972964, rhbz#983350, rhbz#985782, rhbz#985980, rhbz#990319
      rhbz#990418, rhbz#991290, rhbz#992980, rhbz#994731, rhbz#995377
      rhbz#997627, rhbz#997802, rhbz#1006700, rhbz#1007698, rhbz#1007759
      rhbz#1010885, rhbz#1022874, rhbz#1023366, rhbz#1025407, rhbz#1027076
      rhbz#1029266, rhbz#1029732, rhbz#1032363, rhbz#1033020, rhbz#1033398
      rhbz#1033704, rhbz#1035128, rhbz#1046192, rhbz#1049038, rhbz#1052114
      rhbz#1056902, rhbz#1062142, rhbz#1063837, rhbz#1066280, rhbz#1066894
      rhbz#1067338, rhbz#1069552, rhbz#1069784, rhbz#1070680, rhbz#1072141
      rhbz#1072677, rhbz#1073368, rhbz#1073506, rhbz#1074086, rhbz#1075290
      rhbz#1075299, rhbz#1076957, rhbz#1076959, rhbz#1076960, rhbz#1076962
      rhbz#1077009, rhbz#1077572, rhbz#1078590, rhbz#1079162, rhbz#1079173
      rhbz#1080859, rhbz#1081881, rhbz#1081932, rhbz#1082124, rhbz#1083345
      rhbz#1084360, rhbz#1085706, rhbz#1085769, rhbz#1086121, rhbz#1086331
      rhbz#1086704, rhbz#1087104, rhbz#1087671, rhbz#1088293, rhbz#1088667
      rhbz#1088787, rhbz#1088864, rhbz#1089179, rhbz#1089378, rhbz#1091132
      rhbz#1091866, rhbz#1092038, rhbz#1092253, rhbz#1093127, rhbz#1095035
      rhbz#1097028, rhbz#1097503, rhbz#1097677, rhbz#1097968, rhbz#1098659
      rhbz#1099978, rhbz#1100086, rhbz#1100769, rhbz#1101059, rhbz#1101510
      rhbz#1101987, rhbz#1101999, rhbz#1102426, rhbz#1102457, rhbz#1102611
      rhbz#1104992, rhbz#1104993, rhbz#1105939, rhbz#1108593, rhbz#1110198
      rhbz#1110212, rhbz#1110673, rhbz#1111044, rhbz#1112939, rhbz#1113332
      rhbz#1113668, rhbz#1113751, rhbz#1113868, rhbz#1118710, rhbz#1119206
      rhbz#1119387, rhbz#1119592, rhbz#1120474, rhbz#1122255, rhbz#1122973
  - spec: Enable qemu driver for RHEL-7 on ppc64 (rhbz#1120474)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-1
changelog:
  - Rebased to libvirt-1.2.8 (rhbz#1035158)
  - The rebase also fixes the following bugs:
      rhbz#927369, rhbz#957293, rhbz#999926, rhbz#1021703, rhbz#1043735
      rhbz#1047818, rhbz#1062142, rhbz#1064770, rhbz#1072653, rhbz#1078126
      rhbz#1095636, rhbz#1103245, rhbz#1119215, rhbz#1121837, rhbz#1121955
      rhbz#1122455, rhbz#1126329, rhbz#1126721, rhbz#1126909, rhbz#1128097
      rhbz#1128751, rhbz#1129207, rhbz#1129372, rhbz#1129998, rhbz#1130089
      rhbz#1130379, rhbz#1131306, rhbz#1131445, rhbz#1131788, rhbz#1131811
      rhbz#1131819, rhbz#1131876, rhbz#1132301, rhbz#1132305, rhbz#1132347


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-2
changelog:
  - remote: Fix memory leak on error path when deserializing bulk stats (rhbz#1136350)
  - spec: Fix preun script for daemon (rhbz#1136736)
  - security: fix DH key generation when FIPS mode is on (rhbz#1128497)
  - tests: force FIPS testing mode with new enough GNU TLS versions (rhbz#1128497)
  - Don't include non-migratable features in host-model (rhbz#1138221)
  - qemu: Rename DEFAULT_JOB_MASK to QEMU_DEFAULT_JOB_MASK (rhbz#1134154)
  - qemu: snapshot: Fix job handling when creating snapshots (rhbz#1134154)
  - qemu: snapshot: Acquire job earlier on snapshot revert/delete (rhbz#1134154)
  - qemu: snapshot: Fix snapshot function header formatting and spacing (rhbz#1134154)
  - qemu: snapshot: Simplify error paths (rhbz#1134154)
  - qemu: Propagate QEMU errors during incoming migrations (rhbz#1090093)
  - Refactor job statistics (rhbz#1063724)
  - qemu: Avoid incrementing jobs_queued if virTimeMillisNow fails (rhbz#1063724)
  - Add support for fetching statistics of completed jobs (rhbz#1063724)
  - qemu: Silence coverity on optional migration stats (rhbz#1063724)
  - virsh: Add support for completed job stats (rhbz#1063724)
  - qemu: Transfer migration statistics to destination (rhbz#1063724)
  - qemu: Recompute downtime and total time when migration completes (rhbz#1063724)
  - qemu: Transfer recomputed stats back to source (rhbz#1063724)
  - conf: Extend <loader/> and introduce <nvram/> (rhbz#1112257)
  - qemu: Implement extended loader and nvram (rhbz#1112257)
  - qemu: Automatically create NVRAM store (rhbz#1112257)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-3
changelog:
  - virsh: Move --completed from resume to domjobinfo (rhbz#1063724)
  - qemu_driver: Resolve Coverity COPY_PASTE_ERROR (rhbz#1141209)
  - virfile: Resolve Coverity DEADCODE (rhbz#1141209)
  - lxc: Resolve Coverity FORWARD_NULL (rhbz#1141209)
  - qemu: Resolve Coverity FORWARD_NULL (rhbz#1141209)
  - qemu: Resolve Coverity FORWARD_NULL (rhbz#1141209)
  - xen: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - qemu: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - qemu: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - virsh: Resolve Coverity NEGATIVE_RETURNS (rhbz#1141209)
  - daemon: Resolve Coverity RESOURCE_LEAK (rhbz#1141209)
  - domain_conf: Resolve Coverity COPY_PASTE_ERROR (rhbz#1141209)
  - storage_conf: Fix libvirtd crash when defining scsi storage pool (rhbz#1141943)
  - qemu: time: Report errors if agent command fails (rhbz#1142294)
  - util: storage: Copy driver type when initializing chain element (rhbz#1140984)
  - docs, conf, schema: add support for shared memory mapping (rhbz#1133144)
  - qemu: add support for shared memory mapping (rhbz#1133144)
  - rpc: reformat the flow to make a bit more sense (rhbz#927369)
  - remove redundant pidfile path constructions (rhbz#927369)
  - util: fix potential leak in error codepath (rhbz#927369)
  - util: get rid of unnecessary umask() call (rhbz#927369)
  - rpc: make daemon spawning a bit more intelligent (rhbz#927369)
  - conf: add backend element to interfaces (rhbz#1139362)
  - Wire up the interface backend options (rhbz#1139362)
  - CVE-2014-3633: qemu: blkiotune: Use correct definition when looking up disk (CVE-2014-3633)
  - qemu: fix crash with shared disks (rhbz#1142722)
  - nvram: Fix permissions (rhbz#1026772)
  - libvirt.spec: Fix permission even for libvirt-driver-qemu (rhbz#1026772)
  - virDomainUndefineFlags: Allow NVRAM unlinking (rhbz#1026772)
  - formatdomain: Update <loader/> example to match the rest (rhbz#1026772)
  - domaincaps: Expose UEFI capability (rhbz#1026772)
  - qemu_capabilities: Change virQEMUCapsFillDomainCaps signature (rhbz#1026772)
  - domaincaps: Expose UEFI binary path, if it exists (rhbz#1026772)
  - domaincapstest: Run cleanly on systems missing OVMF firmware (rhbz#1026772)
  - conf: Disallow nonexistent NUMA nodes for hugepages (rhbz#1135396)
  - qemu: Honor hugepages for UMA domains (rhbz#1135396)
  - RHEL: Fix maxvcpus output (rhbz#1092363)
  - virsh: Add iothread to 'attach-disk' (rhbz#1101574)
  - qemu: Issue query-iothreads and to get list of active IOThreads (rhbz#1101574)
  - vircgroup: Introduce virCgroupNewIOThread (rhbz#1101574)
  - qemu_domain: Add niothreadpids and iothreadpids (rhbz#1101574)
  - qemu_cgroup: Introduce cgroup functions for IOThreads (rhbz#1101574)
  - qemu: Allow pinning specific IOThreads to a CPU (rhbz#1101574)
  - domain_conf: Add iothreadpin to cputune (rhbz#1101574)
  - vircgroup: Fix broken builds without cgroups (rhbz#1101574)
  - cputune: allow interleaved xml (rhbz#1101574)
  - qemu: Fix iothreads issue (rhbz#1101574)
  - qemu_cgroup: Adjust spacing around incrementor (rhbz#1101574)
  - qemu: Fix call in qemuDomainSetNumaParamsLive for virCgroupNewIOThread (rhbz#1101574)
  - qemu: Need to check for capability before query (rhbz#1101574)
  - qemu: Don't fail startup/attach for IOThreads if no JSON (rhbz#1101574)
  - Fixes for domains with no iothreads (rhbz#1101574)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-4
changelog:
  - Fix libvirtd crash when removing metadata (rhbz#1143955)
  - Fix leak in x86UpdateHostModel (rhbz#1144303)
  - Move the FIPS detection from capabilities (rhbz#1135431)
  - qemu: raise an error when trying to use readonly sata disks (rhbz#1112939)
  - virsh-host: fix pagesize unit of freepages (rhbz#1145048)
  - nodeinfo: report error when given node is out of range (rhbz#1145050)
  - Fix typo of virNodeGetFreePages comment (rhbz#1145050)
  - nodeinfo: Prefer MIN in nodeGetFreePages (rhbz#1145050)
  - Fix bug with loading bridge name for active domain during libvirtd start (rhbz#1140085)
  - qemu: save image: Split out user provided XML checker (rhbz#1142693)
  - qemu: save image: Add possibility to return XML stored in the image (rhbz#1142693)
  - qemu: save image: Split out new definition check/update (rhbz#1142693)
  - qemu: save image: Split out checks done only when editing the save img (rhbz#1142693)
  - qemu: hook: Provide hook when restoring a domain save image (rhbz#1142693)
  - qemu: Expose additional migration statistics (rhbz#1013055)
  - qemu: Fix old tcp:host URIs more cleanly (rhbz#1013055)
  - qemu: Prepare support for arbitrary migration protocol (rhbz#1013055)
  - qemu: Add RDMA migration capabilities (rhbz#1013055)
  - qemu: RDMA migration support (rhbz#1013055)
  - qemu: Memory pre-pinning support for RDMA migration (rhbz#1013055)
  - qemu: Fix memory leak in RDMA migration code (rhbz#1013055)
  - schemas: finish virTristate{Bool, Switch} transition (rhbz#1139364)
  - conf: split out virtio net driver formatting (rhbz#1139364)
  - conf: remove redundant local variable (rhbz#1139364)
  - conf: add options for disabling segment offloading (rhbz#1139364)
  - qemu: wire up virtio-net segment offloading options (rhbz#1139364)
  - spec: Enable qemu driver for RHEL-7 on aarch64 (rhbz#1142448)
  - blkdeviotune: fix bug with saving values into live XML (rhbz#1146511)
  - security: Fix labelling host devices (rhbz#1146550)
  - qemu: Add missing goto on rawio (rhbz#1103739)
  - hostdev: Add "rawio" attribute to _virDomainHostdevSubsysSCSI (rhbz#1103739)
  - qemu: Process the hostdev "rawio" setting (rhbz#1103739)
  - util: Add function to check if a virStorageSource is "empty" (rhbz#1138231)
  - util: storage: Allow metadata crawler to report useful errors (rhbz#1138231)
  - qemu: Sanitize argument names and empty disk check in qemuDomainDetermineDiskChain (rhbz#1138231)
  - qemu: Report better errors from broken backing chains (rhbz#1138231)
  - storage: Improve error message when traversing backing chains (rhbz#1138231)
  - qemu: Always re-detect backing chain (rhbz#1144922)
  - event: introduce new event for tunable values (rhbz#1115898)
  - tunable_event: extend debug message and tweak limit for remote message (rhbz#1115898)
  - add an example how to use tunable event (rhbz#1115898)
  - Fix MinGW build (rhbz#1115898)
  - event_example: cleanup example code for tunable event (rhbz#1115898)
  - cputune_event: queue the event for cputune updates (rhbz#1115898)
  - blkdeviotune: trigger tunable event for blkdeviotune updates (rhbz#1115898)
  - Rename tunable event constants (rhbz#1115898)
  - Fix typo s/EMULATORIN/EMULATORPIN/ (rhbz#1115898)
  - Check for NULL in qemu monitor event filter (rhbz#1144920)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-5
changelog:
  - qemuPrepareNVRAM: Save domain after NVRAM path generation (rhbz#1026772)
  - Fix crash cpu_shares change event crash on domain startup (rhbz#1147494)
  - Don't verify CPU features with host-passthrough (rhbz#1147584)
  - Also filter out non-migratable features out of host-passthrough (rhbz#1147584)
  - selinux: Avoid label reservations for type = none (rhbz#1138487)
  - qemu: bulk stats: extend internal collection API (rhbz#1113116)
  - qemu: bulk stats: implement CPU stats group (rhbz#1113116)
  - qemu: bulk stats: implement balloon group (rhbz#1113116)
  - qemu: bulk stats: implement VCPU group (rhbz#1113116)
  - qemu: bulk stats: implement interface group (rhbz#1113116)
  - qemu: bulk stats: implement block group (rhbz#1113116)
  - virsh: add options to query bulk stats group (rhbz#1113116)
  - lib: De-duplicate stats group documentation for all stats functions (rhbz#1113116)
  - lib: Document that virConnectGetAllDomainStats may omit some stats fields (rhbz#1113116)
  - man: virsh: Add docs for supported stats groups (rhbz#1113116)
  - qemu: monitor: return block stats data as a hash to avoid disk mixup (rhbz#1113116)
  - qemu: monitor: Avoid shadowing variable "devname" on FreeBSD (rhbz#1113116)
  - qemu: monitor: Add helper function to fill physical/virtual image size (rhbz#1113116)
  - qemu: bulk stats: add block allocation information (rhbz#1113116)
  - qemu: json: Fix missing break in error reporting function (rhbz#1113116)
  - qemu: monitor: Avoid shadowing variable "devname" on FreeBSD. Again. (rhbz#1113116)
  - docs, conf, schema: add support for shmem device (rhbz#1126991)
  - qemu: add capability probing for ivshmem device (rhbz#1126991)
  - qemu: Build command line for ivshmem device (rhbz#1126991)
  - minor shmem clean-ups (rhbz#1126991)
  - virSecuritySELinuxSetTapFDLabel: Temporarily revert to old behavior (rhbz#1095636)
  - domain_conf: fix domain deadlock (CVE-2014-3657)
  - qemu: support relative backing for RHEL 7.0.z qemu (rhbz#1150322)
  - qemu: Fix hot unplug of SCSI_HOST device (rhbz#1141732)
  - qemu: Remove need for virConnectPtr in hotunplug detach host, net (rhbz#1141732)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-6
changelog:
  - qemu: support nospace reason in io error event (rhbz#1119784)
  - RHEL: Add support for QMP I/O error reason (rhbz#1119784)
  - nodeinfo: fix nodeGetFreePages when max node is zero (rhbz#1145048)
  - nodeGetFreePages: Push forgotten change (rhbz#1145048)
  - conf: tests: fix virDomainNetDefFormat for vhost-user in client mode (rhbz#1155458)
  - util: string: Add helper to check whether string is empty (rhbz#1142693)
  - qemu: restore: Fix restoring of VM when the restore hook returns empty XML (rhbz#1142693)
  - security_selinux: Don't relabel /dev/net/tun (rhbz#1095636)
  - qemu: Fix updating bandwidth limits in live XML (rhbz#1146511)
  - qemu: save domain status after set the blkio parameters (rhbz#1146511)
  - qemu: call qemuDomainObjBeginJob/qemuDomainObjEndJob in qemuDomainSetInterfaceParameters (rhbz#1146511)
  - qemu: save domain status after set domain's numa parameters (rhbz#1146511)
  - qemu: forbid snapshot-delete --children-only on external snapshot (rhbz#956506)
  - qemu: better error message when block job can't succeed (rhbz#1140981)
  - Reject live update of offloading options (rhbz#1155441)
  - virutil: Introduce virGetSCSIHostNumber (rhbz#1146837)
  - virutil: Introduce virGetSCSIHostNameByParentaddr (rhbz#1146837)
  - storage_conf: Resolve libvirtd crash matching scsi_host (rhbz#1146837)
  - Match scsi_host pools by parent address first (rhbz#1146837)
  - Relax duplicate SCSI host pool checking (rhbz#1146837)
  - qemu: Remove possible NULL deref in debug output (rhbz#1141621)
  - virsh: Adjust the text in man page regarding qemu-attach (rhbz#1141621)
  - hotplug: Check for alias in controller detach (rhbz#1141621)
  - hotplug: Check for alias in disk detach (rhbz#1141621)
  - hotplug: Check for alias in hostdev detach (rhbz#1141621)
  - hotplug: Check for alias in chrdev detach (rhbz#1141621)
  - hotplug: Check for alias in net detach (rhbz#1141621)
  - qemu-attach: Assign device aliases (rhbz#1141621)
  - hotplug: fix char device detach (rhbz#1141621)
  - storage: Fix crash when parsing backing store URI with schema (rhbz#1156288)
  - remote: fix jump depends on uninitialised value (rhbz#1158715)
  - qemu: Release nbd port from migrationPorts instead of remotePorts (rhbz#1159245)
  - conf: add trustGuestRxFilters attribute to network and domain interface (rhbz#848199)
  - network: set interface actual trustGuestRxFilters from network/portgroup (rhbz#848199)
  - util: define virNetDevRxFilter and basic utility functions (rhbz#848199)
  - qemu: qemuMonitorQueryRxFilter - retrieve guest netdev rx-filter (rhbz#848199)
  - qemu: add short document on qemu event handlers (rhbz#848199)
  - qemu: setup infrastructure to handle NIC_RX_FILTER_CHANGED event (rhbz#848199)
  - qemu: change macvtap device MAC address in response to NIC_RX_FILTER_CHANGED (rhbz#848199)
  - util: Functions to update host network device's multicast filter (rhbz#848199)
  - qemu: change macvtap multicast list in response to NIC_RX_FILTER_CHANGED (rhbz#848199)
  - virnetdev: Resolve Coverity DEADCODE (rhbz#848199)
  - virnetdev: Resolve Coverity FORWARD_NULL (rhbz#848199)
  - virnetdev: Resolve Coverity RESOURCE_LEAK (rhbz#848199)
  - lxc: improve error message for invalid blkiotune settings (rhbz#1131306)
  - qemu: improve error message for invalid blkiotune settings (rhbz#1131306)
  - Do not probe for power mgmt capabilities in lxc emulator (rhbz#1159227)
  - qemu: make advice from numad available when building commandline (rhbz#1138545)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-7
changelog:
  - qemu: avoid rare race when undefining domain (rhbz#1150505)
  - qemu: stop NBD server after successful migration (rhbz#1160212)
  - Require at least one console for LXC domain (rhbz#1155410)
  - remote: Fix memory leak in remoteConnectGetAllDomainStats (rhbz#1158715)
  - CVE-2014-7823: dumpxml: security hole with migratable flag (CVE-2014-7823)
  - Free job statistics from the migration cookie (rhbz#1161124)
  - Fix virDomainChrEquals for spicevmc (rhbz#1162097)
  - network: fix call virNetworkEventLifecycleNew when networkStartNetwork fail (rhbz#1162915)
  - Do not crash on gluster snapshots with no host name (rhbz#1162974)
  - nwfilter: fix deadlock caused updating network device and nwfilter (rhbz#1143780)
  - util: eliminate "use after free" in callers of virNetDevLinkDump (rhbz#1163463)
  - storage: Check for valid fc_host parent at startup (rhbz#1160565)
  - storage: Ensure fc_host parent matches wwnn/wwpn (rhbz#1160565)
  - storage: Don't use a stack copy of the adapter (rhbz#1160926)
  - storage: Introduce virStoragePoolSaveConfig (rhbz#1160926)
  - storage: Introduce 'managed' for the fchost parent (rhbz#1160926)
  - qemu: Always set migration capabilities (rhbz#1163953)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-8
changelog:
  - qemu: Fix crash in tunnelled migration (rhbz#1147331)
  - qemu: Really fix crash in tunnelled migration (rhbz#1147331)
  - qemu: Update fsfreeze status on domain state transitions (rhbz#1160084)
  - qemuPrepareNVRAM: Save domain conf only if domain's persistent (rhbz#1026772)
  - docs: Document NVRAM behavior on transient domains (rhbz#1026772)
  - Fix build in qemu_capabilities (rhbz#1165782)
  - qemu: Support OVMF on armv7l aarch64 guests (rhbz#1165782)
  - qemu: Drop OVMF whitelist (rhbz#1165782)
  - storage: Fix issue finding LU's when block doesn't exist (rhbz#1152382)
  - storage: Add thread to refresh for createVport (rhbz#1152382)
  - storage: qemu: Fix security labelling of new image chain elements (rhbz#1151718)
  - virsh: sync domdisplay help and manual (rhbz#997802)
  - docs: domain: Move docs for storage hosts under the <source> element (rhbz#1164528)
  - test: virstoragetest: Add testing of network disk details (rhbz#1164528)
  - util: storage: Copy hosts of a storage file only if they exist (rhbz#1164528)
  - qemu: Refactor qemuBuildNetworkDriveURI to take a virStorageSourcePtr (rhbz#1164528)
  - tests: Reflow the expected output from RBD disk test (rhbz#1164528)
  - util: split out qemuParseRBDString into a common helper (rhbz#1164528)
  - util: storagefile: Split out parsing of NBD string into a separate func (rhbz#1164528)
  - storage: Allow parsing of RBD backing strings when building backing chain (rhbz#1164528)
  - storage: rbd: qemu: Add support for specifying internal RBD snapshots (rhbz#1164528)
  - storage: rbd: Implement support for passing config file option (rhbz#1164528)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-9
changelog:
  - doc: fix mismatched ACL attribute name (rhbz#1161358)
  - qemu: monitor: Rename and improve qemuMonitorGetPtyPaths (rhbz#1146944)
  - conf: Add channel state for virtio channels to the XML (rhbz#1146944)
  - qemu: Add handling for VSERPORT_CHANGE event (rhbz#1146944)
  - qemu: chardev: Extract more information about character devices (rhbz#1146944)
  - qemu: process: Refresh virtio channel guest state when connecting to mon (rhbz#1146944)
  - event: Add guest agent lifecycle event (rhbz#1146944)
  - examples: Add support for the guest agent lifecycle event (rhbz#1146944)
  - qemu: Emit the guest agent lifecycle event (rhbz#1146944)
  - internal: add macro to round value to the next closest power of 2 (rhbz#1076098)
  - video: cleanup usage of vram attribute and update documentation (rhbz#1076098)
  - QXL: fix setting ram and vram values for QEMU QXL device (rhbz#1076098)
  - caps: introduce new QEMU capability for vgamem_mb device property (rhbz#1076098)
  - qemu-command: use vram attribute for all video devices (rhbz#1076098)
  - qemu-command: introduce new vgamem attribute for QXL video device (rhbz#1076098)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-10
changelog:
  - qemu: add the missing jobinfo type in qemuDomainGetJobInfo (rhbz#1167883)
  - network: Fix upgrade from libvirt older than 1.2.4 (rhbz#1167145)
  - qemu: fix domain startup failing with 'strict' mode in numatune (rhbz#1168866)
  - qemu: Don't track quiesced state of FSs (rhbz#1160084)
  - qemu: fix block{commit,copy} abort handling (rhbz#1135169)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-11
changelog:
  - virsh: vol-upload disallow negative offset (rhbz#1087104)
  - storage: fix crash caused by no check return before set close (rhbz#1087104)
  - qemu: Fix virsh freeze when blockcopy storage file is removed (rhbz#1139567)
  - security: Manage SELinux labels on shared/readonly hostdev's (rhbz#1082521)
  - nwfilter: fix crash when adding non-existing nwfilter (rhbz#1169409)
  - conf: Fix libvirtd crash matching hostdev XML (rhbz#1174053)
  - qemu: Resolve Coverity REVERSE_INULL (rhbz#1172570)
  - CVE-2014-8131: Fix possible deadlock and segfault in qemuConnectGetAllDomainStats() (CVE-2014-8131)
  - qemu: bulk stats: Fix logic in monitor handling (rhbz#1172570)
  - qemu: avoid rare race when undefining domain (rhbz#1150505)
  - Do not format CPU features without a model (rhbz#1151885)
  - Ignore CPU features without a model for host-passthrough (rhbz#1151885)
  - Silently ignore MAC in NetworkLoadConfig (rhbz#1156367)
  - Generate a MAC when loading a config instead of package update (rhbz#1156367)
  - qemu: move setting emulatorpin ahead of monitor showing up (rhbz#1170484)
  - util: Introduce flags field for macvtap creation (rhbz#1081461)
  - network: Bring netdevs online later (rhbz#1081461)
  - qemu: always call qemuInterfaceStartDevices() when starting CPUs (rhbz#1081461)
  - qemu: add a qemuInterfaceStopDevices(), called when guest CPUs stop (rhbz#1081461)
  - conf: replace call to virNetworkFree() with virObjectUnref() (rhbz#1099210)
  - util: new functions for setting bridge and bridge port attributes (rhbz#1099210)
  - util: functions to manage bridge fdb (forwarding database) (rhbz#1099210)
  - conf: new network bridge device attribute macTableManager (rhbz#1099210)
  - network: save bridge name in ActualNetDef when actualType==network too (rhbz#1099210)
  - network: store network macTableManager setting in NetDef actual object (rhbz#1099210)
  - network: setup bridge devices for macTableManager='libvirt' (rhbz#1099210)
  - qemu: setup tap devices for macTableManager='libvirt' (rhbz#1099210)
  - qemu: add/remove bridge fdb entries as guest CPUs are started/stopped (rhbz#1099210)
  - virsh: document block.n.allocation stat (rhbz#1041569)
  - getstats: avoid memory leak on OOM (rhbz#1041569)
  - getstats: improve documentation (rhbz#1041569)
  - getstats: start giving offline block stats (rhbz#1041569)
  - getstats: add block.n.path stat (rhbz#1041569)
  - qemuMonitorJSONBlockStatsUpdateCapacity: Don't skip disks (rhbz#1041569)
  - getstats: prepare monitor collection for recursion (rhbz#1041569)
  - getstats: perform recursion in monitor collection (rhbz#1041569)
  - getstats: prepare for dynamic block.count stat (rhbz#1041569)
  - getstats: add new flag for block backing chain (rhbz#1041569)
  - getstats: split block stats reporting for easier recursion (rhbz#1041569)
  - getstats: crawl backing chain for qemu (rhbz#1041569)
  - logical: Add "--type snapshot" to lvcreate command (rhbz#1166592)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-12
changelog:
  - Fix hotplugging of block device-backed usb disks (rhbz#1175668)
  - qemu: Create memory-backend-{ram, file} iff needed (rhbz#1175397)
  - conf: Don't format actual network definition in migratable XML (rhbz#1177194)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-13
changelog:
  - conf: Fix memory leak when parsing invalid network XML (rhbz#1180136)
  - qxl: change the default value for vgamem_mb to 16 MiB (rhbz#1181052)
  - qemuxml2argvtest: Fix test after change of qxl vgamem_mb default (rhbz#1181052)
  - conf: fix crash when hotplug a channel chr device with no target (rhbz#1181408)
  - qemu: forbid second blockcommit during active commit (rhbz#1135339)
  - qemu_monitor: introduce new function to get QOM path (rhbz#1180574)
  - qemu_process: detect updated video ram size values from QEMU (rhbz#1180574)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-14
changelog:
  - virNetworkDefUpdateIPDHCPHost: Don't crash when updating network (rhbz#1182486)
  - Format CPU features even for host-model (rhbz#1182448)
  - util: Add function virCgroupHasEmptyTasks (rhbz#1161540)
  - util: Add virNumaGetHostNodeset (rhbz#1161540)
  - qemu: Remove unnecessary qemuSetupCgroupPostInit function (rhbz#1161540)
  - qemu: Save numad advice into qemuDomainObjPrivate (rhbz#1161540)
  - qemu: Leave cpuset.mems in parent cgroup alone (rhbz#1161540)
  - qemu: Fix hotplugging cpus with strict memory pinning (rhbz#1161540)
  - util: Fix possible NULL dereference (rhbz#1161540)
  - qemu_driver: fix setting vcpus for offline domain (rhbz#1161540)
  - qemu: migration: Unlock vm on failed ACL check in protocol v2 APIs (CVE-2014-8136)
  - CVE-2015-0236: qemu: Check ACLs when dumping security info from save image (CVE-2015-0236)
  - CVE-2015-0236: qemu: Check ACLs when dumping security info from snapshots (CVE-2015-0236)
  - Check for domain liveness in qemuDomainObjExitMonitor (rhbz#1161024)
  - Mark the domain as active in qemuhotplugtest (rhbz#1161024)
  - Fix vmdef usage while in monitor in qemuDomainHotplugVcpus (rhbz#1161024)
  - Fix vmdef usage while in monitor in BlockStat* APIs (rhbz#1161024)
  - Fix vmdef usage while in monitor in qemu process (rhbz#1161024)
  - Fix vmdef usage after domain crash in monitor on device detach (rhbz#1161024)
  - Fix vmdef usage after domain crash in monitor on device attach (rhbz#1161024)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.8-16
changelog:
  - qemu: don't setup cpuset.mems if memory mode in numatune is not 'strict' (rhbz#1186094)
  - lxc: don't setup cpuset.mems if memory mode in numatune is not 'strict' (rhbz#1186094)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.13-1
changelog:
  - Rebased to libvirt-1.2.13 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#872028, rhbz#907779, rhbz#927252, rhbz#956891, rhbz#1073506
      rhbz#1079917, rhbz#1095637, rhbz#1123767, rhbz#1125764, rhbz#1126762
      rhbz#1130390, rhbz#1131919, rhbz#1132900, rhbz#1135442, rhbz#1138125
      rhbz#1138516, rhbz#1138539, rhbz#1140034, rhbz#1140960, rhbz#1141159
      rhbz#1143921, rhbz#1146334, rhbz#1147195, rhbz#1151942, rhbz#1152404
      rhbz#1152473, rhbz#1153891, rhbz#1155843, rhbz#1158034, rhbz#1158722
      rhbz#1159180, rhbz#1160559, rhbz#1160995, rhbz#1161831, rhbz#1164627
      rhbz#1165485, rhbz#1165993, rhbz#1168849, rhbz#1169183, rhbz#1170092
      rhbz#1170140, rhbz#1170492, rhbz#1171533, rhbz#1171582, rhbz#1172015
      rhbz#1172468, rhbz#1172526, rhbz#1173420, rhbz#1174096, rhbz#1174154
      rhbz#1174569, rhbz#1175123, rhbz#1175449, rhbz#1176503, rhbz#1176510
      rhbz#1177723, rhbz#1178652, rhbz#1178850, rhbz#1178853, rhbz#1178986
      rhbz#1179678, rhbz#1179684, rhbz#1179981, rhbz#1181182, rhbz#1182467
      rhbz#1183869, rhbz#1183890, rhbz#1185165, rhbz#1186175, rhbz#1186199
      rhbz#1186765, rhbz#1186886, rhbz#1188914, rhbz#1189007, rhbz#1190956
      rhbz#1191016, rhbz#1191227, rhbz#1191355, rhbz#1191567, rhbz#1195461
      rhbz#1196503, rhbz#1196528, rhbz#1204017


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.14-1
changelog:
  - Rebased to libvirt-1.2.14 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#790583, rhbz#853839, rhbz#872424, rhbz#921426, rhbz#952499
      rhbz#958510, rhbz#1070695, rhbz#1125755, rhbz#1127045, rhbz#1129198
      rhbz#1135491, rhbz#1140958, rhbz#1141119, rhbz#1142631, rhbz#1142636
      rhbz#1143832, rhbz#1155887, rhbz#1161461, rhbz#1163553, rhbz#1164053
      rhbz#1166024, rhbz#1171484, rhbz#1173468, rhbz#1174147, rhbz#1176050
      rhbz#1177219, rhbz#1177237, rhbz#1179533, rhbz#1181062, rhbz#1187012
      rhbz#1187533, rhbz#1190590, rhbz#1196185, rhbz#1196644, rhbz#1196934
      rhbz#1197600, rhbz#1199036, rhbz#1199182, rhbz#1206365, rhbz#1206406
      rhbz#1206987, rhbz#1207122, rhbz#1207937
  - RHEL: Hack around changed Broadwell/Haswell CPUs (rhbz#1199446)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.15-1
changelog:
  - Rebased to libvirt-1.2.15 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#858147, rhbz#890606, rhbz#1043436, rhbz#1073305, rhbz#1076708
      rhbz#1084876, rhbz#1147847, rhbz#1161617, rhbz#1165119, rhbz#1168530
      rhbz#1171933, rhbz#1177062, rhbz#1177733, rhbz#1181465, rhbz#1192318
      rhbz#1200634, rhbz#1202606, rhbz#1202704, rhbz#1203628, rhbz#1203931
      rhbz#1206114, rhbz#1206479, rhbz#1206521, rhbz#1206625, rhbz#1207257
      rhbz#1208009, rhbz#1208176, rhbz#1208434, rhbz#1208763, rhbz#1209312
      rhbz#1209394, rhbz#1209813, rhbz#1210159, rhbz#1210545, rhbz#1210650
      rhbz#1210669, rhbz#1211436, rhbz#1211548, rhbz#1211550, rhbz#1213434
      rhbz#1213698, rhbz#1215569, rhbz#1216046


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.15-2
changelog:
  - RHEL: Relax qemu-kvm dependency from libvirt-daemon-kvm (rhbz#1212642)
  - caps: Fix regression defaulting to host arch (rhbz#1219191)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.16-1
changelog:
  - Rebased to libvirt-1.2.16 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#847198, rhbz#890648, rhbz#893738, rhbz#976387, rhbz#981546
      rhbz#998813, rhbz#1066375, rhbz#1073233, rhbz#1073305, rhbz#1076354
      rhbz#1131486, rhbz#1143837, rhbz#1146539, rhbz#1159171, rhbz#1159219
      rhbz#1161541, rhbz#1164966, rhbz#1171984, rhbz#1174177, rhbz#1174226
      rhbz#1176020, rhbz#1176739, rhbz#1177599, rhbz#1181074, rhbz#1183893
      rhbz#1191227, rhbz#1194593, rhbz#1195882, rhbz#1197580, rhbz#1204006
      rhbz#1204033, rhbz#1206521, rhbz#1207043, rhbz#1211938, rhbz#1213345
      rhbz#1218145, rhbz#1218577, rhbz#1220195, rhbz#1220265, rhbz#1220474
      rhbz#1220702, rhbz#1220809, rhbz#1221047, rhbz#1221504, rhbz#1223631
      rhbz#1223688, rhbz#1224018, rhbz#1226849


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-1
changelog:
  - Rebased to libvirt-1.2.17 (rhbz#1194593)
  - The rebase also fixes the following bugs:
      rhbz#890648, rhbz#985653, rhbz#1021480, rhbz#1089914, rhbz#1131755
      rhbz#1171933, rhbz#1179680, rhbz#1181087, rhbz#1182388, rhbz#1186797
      rhbz#1186969, rhbz#1194593, rhbz#1196644, rhbz#1200206, rhbz#1201143
      rhbz#1201760, rhbz#1202208, rhbz#1207692, rhbz#1210352, rhbz#1220213
      rhbz#1223177, rhbz#1224053, rhbz#1224088, rhbz#1224233, rhbz#1224587
      rhbz#1225694, rhbz#1226234, rhbz#1226854, rhbz#1227180, rhbz#1227551
      rhbz#1227555, rhbz#1227558, rhbz#1227664, rhbz#1228007, rhbz#1229199
      rhbz#1229592, rhbz#1229666, rhbz#1230039, rhbz#1230137, rhbz#1230664
      rhbz#1232606, rhbz#1232880, rhbz#1234686, rhbz#1234729, rhbz#1235116
      rhbz#1236438, rhbz#1236496, rhbz#1236507, rhbz#1236585, rhbz#1236924
      rhbz#1238153, rhbz#1238338


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-2
changelog:
  - util: bitmap: Don't alloc overly large binary bitmaps (rhbz#1238589)
  - storage: Fix regression in storagePoolUpdateAllState (rhbz#1238610)
  - Separate isa-fdc options generation (rhbz#1227880)
  - Explicitly format the isa-fdc controller for newer q35 machines (rhbz#1227880)
  - Add rhel machine types to qemuDomainMachineNeedsFDC (rhbz#1227880)
  - conf: Don't allow duplicated target names regardless of bus (rhbz#1142631)
  - storage: Revert volume obj list updating after volume creation (4749d82a) (rhbz#1241454)
  - qemu_monitor: Wire up MIGRATION event (rhbz#1212077)
  - qemu: Enable migration events on QMP monitor (rhbz#1212077)
  - qemuDomainGetJobStatsInternal: Support migration events (rhbz#1212077)
  - qemu: Update migration state according to MIGRATION event (rhbz#1212077)
  - qemu: Wait for migration events on domain condition (rhbz#1212077)
  - qemu: Check duplicate WWNs also for hotplugged disks (rhbz#1208009)
  - qemu: move the guest status check before agent config and status check (rhbz#1240979)
  - qemu: report error for non-existing disk in blockjobinfo (rhbz#1241355)
  - virCondWaitUntil: add another return value (rhbz#1147471)
  - virDomainObjSignal: drop this function (rhbz#1147471)
  - monitor: detect that eject fails because the tray is locked (rhbz#1147471)
  - qemu_hotplug: try harder to eject media (rhbz#1147471)
  - qemu: Drop LFs at the end of error from QEMU log (rhbz#1090093)
  - Introduce virHashAtomic (rhbz#1090093)
  - Introduce virErrorCopyNew (rhbz#1090093)
  - RHEL: spec: Require perl-XML-XPath (rhbz#1090093)
  - qemu: Remember incoming migration errors (rhbz#1090093)
  - qemu: Don't report false error from MigrateFinish (rhbz#1090093)
  - qemu: Use error from Finish instead of "unexpectedly failed" (rhbz#1090093)
  - cpu: Add support for MPX and AVX512 Intel features (rhbz#1076170)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-3
changelog:
  - qemuProcessHandleMigrationStatus: Update migration status more frequently (rhbz#1212077)
  - qemuDomainSetNumaParamsLive: Check for NUMA mode more wisely (rhbz#1232663)
  - qemu: process: Improve update of maximum balloon state at startup (rhbz#1242940)
  - storage: Fix pool building when directory already exists (rhbz#1244080)
  - virsh: report error if vcpu number exceed the guest maxvcpu number (rhbz#1160559)
  - cmdVcpuPin: Remove dead code (rhbz#1160559)
  - rpc: Add virNetDaemonHasClients (rhbz#1240283)
  - rpc: Rework timerActive logic in daemon (rhbz#1240283)
  - cgroup: Drop resource partition from virSystemdMakeScopeName (rhbz#1238570)
  - virsh: blockjob: Extract block job info code into a separate function (rhbz#1227551)
  - virsh: cmdBlockJob: Switch to declarative flag interlocking (rhbz#1227551)
  - virsh: blockjob: Split out vshBlockJobSetSpeed from blockJobImpl (rhbz#1227551)
  - virsh: block job: separate abort from blockJobImpl (rhbz#1227551)
  - virsh: Split out block pull implementation from blockJobImpl (rhbz#1227551)
  - virsh: Kill blockJobImpl by moving the final impl into cmdBlockCommit (rhbz#1227551)
  - virsh: Refactor argument checking in cmdBlockCommit (rhbz#1227551)
  - virsh: Refactor argument handling in cmdBlockCopy (rhbz#1227551)
  - virsh: Refactor argument handling in cmdBlockPull (rhbz#1227551)
  - qemu: Update state of block job to READY only if it actually is ready (rhbz#1227551)
  - virsh: Refactor block job waiting in cmdBlockPull (rhbz#1227551)
  - virsh: Refactor block job waiting in cmdBlockCommit (rhbz#1227551)
  - virsh: Refactor block job waiting in cmdBlockCopy (rhbz#1197592)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-4
changelog:
  - qemu: Reject migration with memory-hotplug if destination doesn't support it (rhbz#1248350)
  - qemu: Properly check for incoming migration job (rhbz#1242904)
  - qemu: Do not reset labels when migration fails (rhbz#1242904)
  - qemu: Check for iotune_max support properly (rhbz#1224053)
  - docs: Add Fibre Channel NPIV supported option for volume lun config (rhbz#1238545)
  - conf: Allow error reporting in virDomainDiskSourceIsBlockType (rhbz#1238545)
  - qemu: Forbid image pre-creation for non-shared storage migration (rhbz#1249587)
  - qemu: remove deadcode in qemuDomain{HelperGetVcpus|GetIOThreadsLive} (rhbz#1213713)
  - nodeinfo: Introduce local linuxGetCPUPresentPath (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetCPUCount (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetPresentCPUBitmap (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetCPUBitmap (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetCPUMap (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetInfo (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeCapsInitNUMA (rhbz#1213713)
  - nodeinfo: Add sysfs_prefix to nodeGetMemoryStats (rhbz#1213713)
  - nodeinfo: fix to parse present cpus rather than possible cpus (rhbz#1213713)
  - tests: Add nodeinfo test for non-present CPUs (rhbz#1213713)
  - nodeinfo: Make sysfs_prefix usage more consistent (rhbz#1213713)
  - nodeinfo: Formatting changes (rhbz#1213713)
  - tests: Restore links in deconfigured-cpus nodeinfo test (rhbz#1213713)
  - nodeinfo: Add nodeGetPresentCPUBitmap() to libvirt_private.syms (rhbz#1213713)
  - nodeinfo: Fix nodeGetCPUBitmap()'s fallback code path (rhbz#1213713)
  - nodeinfo: Introduce linuxGetCPUGlobalPath() (rhbz#1213713)
  - nodeinfo: Introduce linuxGetCPUOnlinePath() (rhbz#1213713)
  - nodeinfo: Rename linuxParseCPUmax() to linuxParseCPUCount() (rhbz#1213713)
  - nodeinfo: Add old kernel compatibility to nodeGetPresentCPUBitmap() (rhbz#1213713)
  - nodeinfo: Remove out parameter from nodeGetCPUBitmap() (rhbz#1213713)
  - nodeinfo: Rename nodeGetCPUBitmap() to nodeGetOnlineCPUBitmap() (rhbz#1213713)
  - nodeinfo: Phase out cpu_set_t usage (rhbz#1213713)
  - nodeinfo: Use nodeGetOnlineCPUBitmap() when parsing node (rhbz#1213713)
  - nodeinfo: Use a bitmap to keep track of node CPUs (rhbz#1213713)
  - nodeinfo: Calculate present and online CPUs only once (rhbz#1213713)
  - nodeinfo: Check for errors when reading core_id (rhbz#1213713)
  - Renamed deconfigured-cpus to allow make dist (rhbz#1213713)
  - tests: Finish rename of the long nodeinfo test case (rhbz#1213713)
  - nodeinfo: Fix output on PPC64 KVM hosts (rhbz#1213713)
  - tests: Prepare for subcore tests (rhbz#1213713)
  - tests: Add subcores1 nodeinfo test (rhbz#1213713)
  - tests: Add subcores2 nodeinfo test (rhbz#1213713)
  - tests: Add subcores3 nodeinfo test (rhbz#1213713)
  - nodeinfo: Fix build failure when KVM headers are not available (rhbz#1213713)
  - qemu: fix some api cannot work when disable cpuset in conf (rhbz#1244664)
  - qemu: Auto assign pci addresses for shared memory devices (rhbz#1165029)
  - conf: Add getter for network routes (rhbz#1094205)
  - network: Add another collision check into networkCheckRouteCollision (rhbz#1094205)
  - docs: Document how libvirt handles companion controllers (rhbz#1069590)
  - qemu: Reject updating unsupported disk information (rhbz#1007228)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-5
changelog:
  - numa_conf: Introduce virDomainNumaGetMaxCPUID (rhbz#1176020)
  - virDomainDefParseXML: Check for malicious cpu ids in <numa/> (rhbz#1176020)
  - conf: more useful error message when pci function is out of range (rhbz#1004596)
  - qemu: Fix reporting of physical capacity for block devices (rhbz#1250982)
  - network: verify proper address family in updates to <host> and <range> (rhbz#1184736)
  - rpc: Remove keepalive_required option (rhbz#1247087)
  - virNetDevBandwidthParseRate: Reject negative values (rhbz#1022292)
  - domain: Fix crash if trying to live update disk <serial> (rhbz#1007228)
  - qemu: fail on attempts to use <filterref> for non-tap network connections (rhbz#1180011)
  - network: validate network NAT range (rhbz#985653)
  - conf: Don't try formating non-existing addresses (rhbz#985653)
  - cpu: Rename {powerpc, ppc} => ppc64 (filesystem) (rhbz#1250977)
  - cpu: Rename {powerpc, ppc} => ppc64 (exported symbols) (rhbz#1250977)
  - cpu: Rename {powerpc, ppc} => ppc64 (internal symbols) (rhbz#1250977)
  - cpu: Indentation changes in the ppc64 driver (rhbz#1250977)
  - cpu: Mark driver functions in ppc64 driver (rhbz#1250977)
  - cpu: Simplify NULL handling in ppc64 driver (rhbz#1250977)
  - cpu: Simplify ppc64ModelFromCPU() (rhbz#1250977)
  - cpu: Reorder functions in the ppc64 driver (rhbz#1250977)
  - cpu: Remove ISA information from CPU map XML (rhbz#1250977)
  - tests: Remove unused file (rhbz#1250977)
  - tests: Improve result handling in cpuTestGuestData() (rhbz#1250977)
  - cpu: Never skip CPU model name check in ppc64 driver (rhbz#1250977)
  - cpu: CPU model names have to match on ppc64 (rhbz#1250977)
  - cpu: Use ppc64Compute() to implement ppc64DriverCompare() (rhbz#1250977)
  - tests: Temporarily disable ppc64 cpu tests (rhbz#1250977)
  - cpu: Align ppc64 CPU data with x86 (rhbz#1250977)
  - cpu: Support multiple PVRs in the ppc64 driver (rhbz#1250977)
  - cpu: Simplify ppc64 part of CPU map XML (rhbz#1250977)
  - cpu: Parse and use PVR masks in the ppc64 driver (rhbz#1250977)
  - cpu: Add POWER8NVL information to CPU map XML (rhbz#1250977)
  - cpu: Implement backwards compatibility in the ppc64 driver (rhbz#1250977)
  - cpu: Forbid model fallback in the ppc64 driver (rhbz#1250977)
  - tests: Re-enable ppc64 cpu tests (rhbz#1250977)
  - tests: Add a bunch of cpu test case for ppc64 (rhbz#1250977)
  - cpu: Fix segfault in the ppc64 driver (rhbz#1250977)
  - qemu: Fix segfault when parsing private domain data (rhbz#1162947)
  - conf: Pass private data to Parse function of XML options (rhbz#1162947)
  - qemu: Keep numad hint after daemon restart (rhbz#1162947)
  - qemu: Use numad information when getting pin information (rhbz#1162947)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-6
changelog:
  - api: Remove check on iothread_id arg in virDomainPinIOThread (rhbz#1251886)
  - api: Adjust comment for virDomainAddIOThread (rhbz#1251886)
  - qemu: Add check for invalid iothread_id in qemuDomainChgIOThread (rhbz#1251886)
  - conf: Check for attach disk usage of iothread=0 (rhbz#1253108)
  - virNetDevBandwidthUpdateRate: turn class_id into integer (rhbz#1252473)
  - bridge_driver: Introduce networkBandwidthChangeAllowed (rhbz#1252473)
  - bridge_driver: Introduce networkBandwidthUpdate (rhbz#1252473)
  - qemuDomainSetInterfaceParameters: Use new functions to update bandwidth (rhbz#1252473)
  - cpu: Don't update host-model guest CPUs on ppc64 (rhbz#1251927)
  - cpu: Better support for ppc64 compatibility modes (rhbz#1251927)
  - cpu: Move check for NULL CPU model inside the driver (rhbz#1251927)
  - tests: Add some compatibility-related cases to the CPU tests (rhbz#1251927)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-7
changelog:
  - Start daemon only after filesystems are mounted (rhbz#1255228)
  - virfile: Add error for root squash change mode failure (rhbz#1253609)
  - virfile: Introduce virFileUnlink (rhbz#1253609)
  - storage: Correct the 'mode' check (rhbz#1253609)
  - storage: Handle failure from refreshVol (rhbz#1253609)
  - util: Add virStringGetFirstWithPrefix (rhbz#1165580)
  - util: Add virCgroupGetBlockDevString (rhbz#1165580)
  - util: Add getters for cgroup block device I/O throttling (rhbz#1165580)
  - lxc: Sync BlkioDevice values when setting them in cgroups (rhbz#1165580)
  - qemu: Sync BlkioDevice values when setting them in cgroups (rhbz#1165580)
  - Allow vfio hotplug of a device to the domain which owns the iommu (rhbz#1256486)
  - hostdev: skip ACS check when using VFIO for device assignment (rhbz#1256486)
  - docs: Clarify unprivileged sgio feature (rhbz#1072736)
  - qemu: Introduce qemuIsSharedHostdev (rhbz#1072736)
  - qemu: Introduce qemuGetHostdevPath (rhbz#1072736)
  - qemu: Refactor qemuCheckSharedDisk to create qemuCheckUnprivSGIO (rhbz#1072736)
  - qemu: Inline qemuGetHostdevPath (rhbz#1072736)
  - qemu: Refactor qemuSetUnprivSGIO return values (rhbz#1072736)
  - qemu: Fix integer/boolean logic in qemuSetUnprivSGIO (rhbz#1072736)
  - RHEL: qemu: Add ability to set sgio values for hostdev (rhbz#1072736)
  - RHEL: qemu: Add check for unpriv sgio for SCSI generic host device (rhbz#1072736)
  - security_selinux: Use proper structure to access socket data (rhbz#1146886)
  - security_dac: Label non-listening sockets (rhbz#1146886)
  - security: Add virSecurityDomainSetDirLabel (rhbz#1146886)
  - security_stack: Add SetDirLabel support (rhbz#1146886)
  - security_selinux: Add SetDirLabel support (rhbz#1146886)
  - security_dac: Add SetDirLabel support (rhbz#1146886)
  - qemu: Fix access to auto-generated socket paths (rhbz#1146886)
  - tests: Use qemuProcessPrepareMonitorChr in qemuxmlnstest (rhbz#1146886)
  - qemu: Label correct per-VM path when starting (rhbz#1146886)
  - selinux: fix compile errors (rhbz#1146886)
  - conf: Add ioeventfd option for controllers (rhbz#1150484)
  - qemu: Enable ioeventfd usage for virtio-scsi controllers (rhbz#1150484)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-8
changelog:
  - util: make virNetDev(Replace|Restore)MacAddress public functions (rhbz#1257004)
  - util: don't use netlink to save/set mac for macvtap+passthrough+802.1Qbh (rhbz#1257004)
  - cpu: Introduce IvyBridge CPU model (rhbz#1254420)
  - examples: Add example polkit ACL rules (rhbz#1115289)
  - qemu: don't use initialized ret in qemuRemoveSharedDevice (rhbz#1072736)
  - qemu: Introduce qemuDomainMachineIsS390CCW (rhbz#1258361)
  - qemu: Need to check for machine.os when using ADDRESS_TYPE_CCW (rhbz#1258361)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-9
changelog:
  - conf: fix crash when parsing a unordered NUMA <cell/> (rhbz#1260846)
  - vmx: Some whitespace cleanup (rhbz#1172544)
  - vmx: The virVMXParseDisk deviceType can be NULL, add some missing checks (rhbz#1172544)
  - vmx: Add handling for CDROM devices with SCSI passthru (rhbz#1172544)
  - qemu: hotplug: Properly clean up drive backend if frontend hotplug fails (rhbz#1262399)
  - qemu: Introduce QEMU_CAPS_DEVICE_RTL8139 (rhbz#1254044)
  - qemu: Introduce QEMU_CAPS_DEVICE_E1000 (rhbz#1254044)
  - qemu: Introduce QEMU_CAPS_DEVICE_VIRTIO_NET (rhbz#1254044)
  - qemu: Try several network devices when looking for a default (rhbz#1254044)
  - qemu: Report error if per-VM directory cannot be created (rhbz#1146886)
  - qemu: Do not allow others into per-VM subdirectories (rhbz#1146886)
  - qemu: Allow others to browse /var/lib/libvirt/qemu (rhbz#1146886)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-10
changelog:
  - virSecuritySELinuxSetSecurityAllLabel: drop useless virFileIsSharedFSType (rhbz#1124841)
  - security_selinux: Replace SELinuxSCSICallbackData with proper struct (rhbz#1124841)
  - virSecurityManager: Track if running as privileged (rhbz#1124841)
  - security_selinux: Take @privileged into account (rhbz#1124841)
  - qemu: Fix using guest architecture as lookup key (rhbz#1260753)
  - virfile: Check for existence of dir in virFileDeleteTree (rhbz#1146886)
  - Revert "qemu: Fix integer/boolean logic in qemuSetUnprivSGIO" (rhbz#1072736)
  - qemu: migration: Relax enforcement of memory hotplug support (rhbz#1252685)
  - conf: Add helper to determine whether memory hotplug is enabled for a vm (rhbz#1252685)
  - qemu: Make memory alignment helper more universal (rhbz#1252685)
  - conf: Drop VIR_DOMAIN_DEF_PARSE_CLOCK_ADJUST flag (rhbz#1252685)
  - conf: Document all VIR_DOMAIN_DEF_PARSE_* flags (rhbz#1252685)
  - conf: Add XML parser flag that will allow us to do incompatible updates (rhbz#1252685)
  - conf: Split memory related post parse stuff into separate function (rhbz#1252685)
  - conf: Rename max_balloon to total_memory (rhbz#1252685)
  - conf: Pre-calculate initial memory size instead of always calculating it (rhbz#1252685)
  - conf: Don't always recalculate initial memory size from NUMA size totals (rhbz#1252685)
  - qemu: command: Align memory sizes only on fresh starts (rhbz#1252685)
  - qemu: ppc64: Align memory sizes to 256MiB blocks (rhbz#1249006)
  - test: Add test to validate that memory sizes don't get updated on migration (rhbz#1252685)
  - qemu: Align memory module sizes to 2MiB (rhbz#1252685)
  - qemu: Refresh memory size only on fresh starts (rhbz#1242940)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-13
changelog:
  - qemu: Add conditions for qemu-kvm use on ppc64 (rhbz#1267882)
  - qemu: Move simplification variable to begining of the function (rhbz#1266856)
  - qemu: Extract -mem-path building into its own function (rhbz#1266856)
  - qemu: Add -mem-path even with numa (rhbz#1266856)
  - qemu: Use memory-backing-file only when needed (rhbz#1266856)
  - qemu: Always update migration times on destination (rhbz#1265902)
  - qemu: Copy completed migration stats only on success (rhbz#1265902)
  - qemu: Introduce flags in qemuMigrationCompleted (rhbz#1265902)
  - qemu: Make updating stats in qemuMigrationCheckJobStatus optional (rhbz#1265902)
  - qemu: Wait until destination QEMU consumes all migration data (rhbz#1265902)


author: Jiri Denemark <jdenemar@redhat.com> - 1.2.17-13.el7_2.1
changelog:
  - qemu: migration: Properly parse memory hotplug migration flag (rhbz#1280419)
  - qemu: Emit correct audit message for memory hot unplug (rhbz#1280420)
  - qemu: Emit correct audit message for memory hot plug (rhbz#1280420)
  - qemu: Extract logic to determine the mlock limit size for VFIO (rhbz#1280420)
  - qemu: hotplug: Fix mlock limit handling on memory hotplug (rhbz#1280420)
  - qemu: domain: Restructurate control flow in qemuDomainGetMlockLimitBytes (rhbz#1280420)
  - qemu: Explain mlock limit size more in detail (rhbz#1280420)
  - qemu: hotplug: Reject VFIO hotplug if setting RLIMIT_MEMLOCK fails (rhbz#1283924)
  - process: Log when limiting the amount of locked memory (rhbz#1283924)
  - qemu: Use qemuDomainRequiresMlock() in qemuBuildCommandLine() (rhbz#1283924)
  - qemu: Use qemuDomainRequiresMlock() when attaching PCI hostdev (rhbz#1283924)
  - qemu: Add ppc64-specific math to qemuDomainGetMlockLimitBytes() (rhbz#1283924)
  - qemu: Always set locked memory limit for ppc64 domains (rhbz#1283924)


author: Daniel Veillard <veillard@redhat.com> 2.6.27-1
changelog:
  - upstream release 2.6.27 see http://xmlsoft.org/news.html
  - very large amount of bug fixes reported upstream


author: Daniel Veillard <veillard@redhat.com> 2.7.0-1.fc10
changelog:
  - upstream release of 2.7.0
  - switch to XML 1.0 5th edition
  - switch to RFC 3986 for URI parsing
  - better entity handling
  - option to remove hardcoded limitations in the parser
  - more testing
  - a new API to allocate entity nodes
  - and lot of fixes and clanups


author: Daniel Veillard <veillard@redhat.com> 2.7.2-1.fc10
changelog:
  - new release 2.7.2
  - Fixes the known problems in 2.7.1
  - increase the set of options when saving documents


author: Daniel Veillard <veillard@redhat.com> - 2.7.3-1
changelog:
  - new release 2.7.3
  - limit default max size of text nodes
  - special parser mode for PHP
  - bug fixes and more compiler checks


author: Daniel Veillard <veillard@redhat.com> - 2.7.4-1
changelog:
  - upstream release 2.7.4
  - symbol versioning of libxml2 shared libs
  - very large number of bug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.7.7-1
changelog:
  - Upstream release of 2.7.7
  - fix serious trouble with zlib >= 1.2.4
  - xmllint new option --xpath
  - various HTML parser improvements
  - includes a number of nug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.7.8-1
changelog:
  - Upstream release of 2.7.8
  - various bug fixes, including potential crashes
  - new non-destructive formatting option
  - date parsing updated to RFC 5646


author: Daniel Veillard <veillard@redhat.com> - 2.9.0-0rc1
changelog:
  - upstream release candidate 1 of 2.9.0
  - introduce a small API change, but ABI compatible, see
    https://mail.gnome.org/archives/xml/2012-August/msg00005.html
    patches for php, gcc/libjava and evolution-data-connector are upstream
    Grab me in cases of problems veillard@redhat.com
  - many bug fixes including security aspects and small improvements


author: Daniel Veillard <veillard@redhat.com> - 2.9.0-1
changelog:
  - upstream release of 2.9.0
  - A few new API entry points
  - More resilient push parser mode
  - A lot of portability improvement
  - Faster XPath evaluation
  - a lot of bug fixes and smaller improvement


author: Daniel Veillard <veillard@redhat.com> - 2.9.0-2
changelog:
  - remaining cleanups from merge bug rhbz#226079
  - do not put the docs in the main package, only in -devel rhbz#864731


author: Daniel Veillard <veillard@redhat.com> - 2.9.1-1
changelog:
  - upstream release of 2.9.1
  - a couple more API entry point
  - compatibility with python3
  - a lot of bug fixes


author: Daniel Veillard <veillard@redhat.com> - 2.9.1-6
changelog:
  - Fix missing entities after CVE-2014-3660 fix
  - CVE-2014-0191 Do not fetch external parameter entities (rhbz#1195650)
  - Fix regressions introduced by CVE-2014-0191 patch


author: Daniel Veillard <veillard@redhat.com> - 2.9.1-6.2
changelog:
  - Fix a series of CVEs (rhbz#1286496)
  - CVE-2015-7941 Stop parsing on entities boundaries errors
  - CVE-2015-7941 Cleanup conditional section error handling
  - CVE-2015-8317 Fail parsing early on if encoding conversion failed
  - CVE-2015-7942 Another variation of overflow in Conditional sections
  - CVE-2015-7942 Fix an error in previous Conditional section patch
  - Fix parsing short unclosed comment uninitialized access
  - CVE-2015-7498 Avoid processing entities after encoding conversion failures
  - CVE-2015-7497 Avoid an heap buffer overflow in xmlDictComputeFastQKey
  - CVE-2015-5312 Another entity expansion issue
  - CVE-2015-7499 Add xmlHaltParser() to stop the parser
  - CVE-2015-7499 Detect incoherency on GROW
  - CVE-2015-7500 Fix memory access error due to incorrect entities boundaries
  - CVE-2015-8242 Buffer overead with HTML parser in push mode
  - CVE-2015-1819 Enforce the reader to run in constant memory


author: Preston Brown <pbrown@redhat.com> 3.5.6-1
changelog:
  - enable LFS support (debian bug #100810)
  - quote filenames for running compress commands or pre/postrotate cmds (#21348)
  - deprecate "errors" directive (see bug #16544 for explanation)
  - update man page
  - configurable compression command by Colm Buckley <colm@tuatha.org>


author: Preston Brown <pbrown@redhat.com> 3.6-1
changelog:
  - patch from Alexander Kourakos <awk@awks.org> to stop the shared
    postrotate/prerotate scripts from running if none of the log(s) need
    rotating.  All log files are now checked for rotation in one batch,
    rather than sequentially.
  - more fixes from Paul Martin <pm@debian.org>


author: Elliot Lee <sopwith@redhat.com> 3.6.2-1
changelog:
  - Fix bug #55809 (include logrotate.status in "files")
  - Fix bug #58328 (incorrect error detection when reading state file)
  - Allow 'G' size specifier from bug #57242


author: Erik Troan <ewt@redhat.com>
changelog:
  - always use compressext for the extension for compressed
    files; before compresscmd and compressext had to agree
  - moved all compression to one code block
  - compression, scripts don't use system() anymore
  - compress and maillast didn't work together properly
  - delaycompress and mailfirst didn't work properly
  - don't use system() for mailing (or uncompressing) logs anymore
  - use "-s" for speciying the subjected of mailed logs


author: Miloslav Trmac <mitr@redhat.com> - 3.7.1-2
changelog:
  - Fix sending mails (#131583)
  - Preserve file attributes when compressing files (#121523, original patch by
    Daniel Himler)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-11
changelog:
  - logrotate won't stop if there are some errors in configuration
    or glob failures (#166510, #182062)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.4-12
changelog:
  - fix problem with compress_options_list (#227706)
  - fix spec file to meet Fedora standards (#226104)


author: Peter Vrabec <pvrabec@redhat.com> 3.7.5-2
changelog:
  - fix error hadnling after prerotate, postrotate, firstaction 
    script failure. (http://qa.mandriva.com/show_bug.cgi?id=29979)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.5-4
changelog:
  - use dateext in the default config file (#240292)
  - add options to use shred for deleting files -- adapt patch sent by
    Peter Eckersley <pde@eff.org> (#239934)
  - ignore .cfsaved files by default (#223476)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-1
changelog:
  - new upstream version
  - fix #248565 logrotate never rotates /var/log/btmp
  - fix compile warnings
  - tabooext accepts wildcards (related #247816)
  - fix minor errors and update man page (related #250059)
  - fix handling of size directive (related #247410)


author: Tomas Smetana <tsmetana@redhat.com> 3.7.6-2
changelog:
  - fix #427274 - logrotate fails to preserve SELinux file contexts
  - fix #427661 - SELinux stops vsftpd from working correctly


author: Jan Kaluza <jkaluza@redhat.com> 3.7.8-12
changelog:
  - fix #602643 - update manpage to reflect scripts changes
  - fix #606675 - pass currently rotated file as argument to
    postrotate/prerotate script in nosharedscripts mode


author: Jan Kaluza <jkaluza@redhat.com> 3.7.9-5
changelog:
  - fix #661181 - fixed SIGBUS when config file is empty or 4096 bytes
  - fix #666677 - preserve ACLs when rotating files


author: Jan Kaluza <jkaluza@redhat.com> - 3.8.6-5
changelog:
  - mention copy/copytruncate/renamecopy influence to olddir option (#1175292)
  - delete last log when dateformat cannot be sorted alphabetically (#1174208)
  - mark cron.daily/logrotate as config file (#1174207)
  - create olddir diectory if it does not exist (#1187161)


author: Jeremy Katz <katzj@redhat.com> 2.00.08-5
changelog:
  - Fix sysfs patch to find sysfs
  - Take patch from dwalsh and tweak a little for setting SELinux contexts on
    device node creation and also do it on the symlink creation.  
    Part of this should probably be pushed down to device-mapper instead


author: Alasdair Kergon <agk@redhat.com> 2.00.10-1
changelog:
  - Update to version 2.00.10, which incorporates the RH-specific patches
    and includes various fixes and enhancements detailed in WHATS_NEW.


author: Alasdair Kergon <agk@redhat.com> 2.00.12-1
changelog:
  - Install default /etc/lvm/lvm.conf.
  - Move non-static binaries to /usr/sbin.
  - Add temporary links in /sbin to lvm.static until rc.sysinit gets updated.


author: Jeremy Katz <katzj@redhat.com> - 2.00.20-2
changelog:
  - add patch for iSeries viodasd support
  - add patch to check file type using stat(2) if d_type == DT_UNKNOWN (#129674)


author: Alasdair Kergon <agk@redhat.com> - 2.00.24-1
changelog:
  - More upstream fixes.  (Always check WHATS_NEW file for details.)
  - Add requested BuildRequires. [bz 124916, 132408]


author: Alasdair Kergon <agk@redhat.com> - 2.01.07-1.0
changelog:
  - Remove build directory from built-in path.
  - Extra /dev scanning required for clustered operation.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-1.0
changelog:
  - Improve detection of external changes affecting internal cache.
  - Add clustered VG attribute.
  - Suppress rmdir opendir error message.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-2.0
changelog:
  - No longer abort read operations if archive/backup directories aren't there.
  - Add runtime directories and file to the package.


author: Alasdair Kergon <agk@redhat.com> - 2.02.11-1.0
changelog:
  - New upstream with numerous fixes and small enhancements.
    (See the WHATS_NEW documentation file for complete upstream changelog.)


author: Alasdair Kergon <agk@redhat.com> - 2.02.12-2
changelog:
  - Remove no-longer-used ldconfig from lvm2-cluster and fix lvmconf
    to cope without the shared library.


author: Alasdair Kergon <agk@redhat.com> - 2.02.16-1
changelog:
  - Fix VG clustered read locks to use PR not CR.
  - Adjust some alignments for ia64/sparc.
  - Fix mirror segment removal to use temporary error segment.
  - Always compile debug logging into clvmd.
  - Add startup timeout to clvmd startup script.
  - Add -T (startup timeout) switch to clvmd.
  - Improve lvm_dump.sh robustness.


author: Alasdair Kergon <agk@redhat.com> - 2.02.17-1
changelog:
  - Add missing pvremove error message when device doesn't exist.
  - When lvconvert allocates a mirror log, respect parallel area constraints.
  - Check for failure to allocate just the mirror log.
  - Support mirror log allocation when there is only one PV: area_count now 0.
  - Fix detection of smallest area in _alloc_parallel_area() for cling policy.
  - Add manpage entry for clvmd -T
  - Fix hang in clvmd if a pre-command failed.


author: Alasdair Kergon <agk@redhat.com> - 2.02.18-1
changelog:
  - Use CFLAGS when linking so mixed sparc builds can supply -m64.
  - Prevent permission changes on active mirrors.
  - Print warning instead of error message if lvconvert cannot zero volume.
  - Add snapshot options to lvconvert man page.
  - dumpconfig accepts a list of configuration variables to display.
  - Change dumpconfig to use --file to redirect output to a file.
  - Avoid vgreduce error when mirror code removes the log LV.
  - Fix ambiguous vgsplit error message for split LV.
  - Fix lvextend man page typo.
  - Use no flush suspending for mirrors.
  - Fix create mirror with name longer than 22 chars.


author: Alasdair Kergon <agk@redhat.com> - 2.02.19-1
changelog:
  - Fix a segfault if an empty config file section encountered.
  - Fix partition table processing after sparc changes.
  - Fix cmdline PE range processing segfault.
  - Move basic reporting functions into libdevmapper.


author: Alasdair Kergon <agk@redhat.com> - 2.02.20-1
changelog:
  - Fix exit statuses of reporting tools.
  - Add some missing close() and fclose() return code checks.
  - Add devices/ignore_suspended_devices to ignore suspended dm devices.
  - Fix refresh_toolcontext() always to wipe persistent device filter cache.
  - Long-lived processes write out persistent dev cache in refresh_toolcontext().
  - Streamline dm_report_field_* interface.
  - Update reporting man pages.
  - Add --clustered to man pages.
  - Add field definitions to report help text.


author: Alasdair Kergon <agk@redhat.com> - 2.02.21-1
changelog:
  - Fix vgsplit to handle mirrors.
  - Reorder fields in reporting field definitions.
  - Fix vgs to treat args as VGs even when PV fields are displayed.
  - Fix md signature check to handle both endiannesses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.22-1
changelog:
  - Add ncurses-static BuildRequires after package split.
  - Fix loading of segment_libraries.
  - If a PV reappears after it was removed from its VG, make it an orphan.
  - Don't update metadata automatically if VGIDs don't match.
  - Fix some vgreduce --removemissing command line validation.
  - Trivial man page corrections (-b and -P).
  - Add global/units to example.conf.
  - Remove readline support from lvm.static.


author: Alasdair Kergon <agk@redhat.com> - 2.02.23-1
changelog:
  - Fix vgrename active LV check to ignore differing vgids.
  - Fix two more segfaults if an empty config file section encountered.
  - Fix a leak in a reporting error path.
  - Add devices/cache_dir & devices/cache_file_prefix, deprecating devices/cache.


author: Alasdair Kergon <agk@redhat.com> - 2.02.24-1
changelog:
  - Add BuildRequires readline-static until makefiles get fixed.
  - Fix processing of exit status in init scripts
  - Fix vgremove to require at least one vg argument.
  - Fix reading of striped LVs in LVM1 format.
  - Flag nolocking as clustered so clvmd startup sees clustered LVs.
  - Add a few missing pieces of vgname command line validation.
  - Support the /dev/mapper prefix on most command lines.


author: Alasdair Kergon <agk@redhat.com> - 2.02.27-1
changelog:
  - Add -f to vgcfgrestore to list metadata backup files.
  - Add pvdisplay --maps implementation.
  - Add devices/preferred_names config regex list for displayed device names.
  - Add vg_mda_count and pv_mda_count columns to reports.
  - Change cling alloc policy attribute character from 'C' to l'.
  - Print warnings to stderr instead of stdout.
  - Fix snapshot cow area deactivation if origin is not active.
  - Reinitialise internal lvmdiskscan variables when called repeatedly.
  - Allow keyboard interrupt during user prompts when appropriate.
  - Fix deactivation code to follow dependencies and remove symlinks.
  - Fix a segfault in device_is_usable() if a device has no table.
  - Fix creation and conversion of mirrors with tags.
  - Add command stub for pvck.
  - Handle vgsplit of an entire VG as a vgrename.
  - Fix vgsplit for lvm1 format (set and validate VG name in PVs metadata).
  - Split metadata areas in vgsplit properly.
  - Fix and clarify vgsplit error messages.
  - Update lists of attribute characters in man pages.
  - Remove unsupported LVM1 options from vgcfgrestore man page.
  - Update vgcfgrestore man page to show mandatory VG name.
  - Update vgrename man page to include UUID and be consistent with lvrename.
  - Add some more debug messages to clvmd startup.
  - Fix thread race in clvmd.
  - Make clvmd cope with quorum devices.
  - Add extra internal error checking to clvmd.
  - Fix missing lvm_shell symbol in lvm2cmd library.
  - Move regex functions into libdevmapper.
  - Add kernel and device-mapper targets versions to lvmdump.
  - Add /sys/block listings to lvmdump.
  - Make lvmdump list /dev recursively.
  - Mark /etc/lvm subdirectories as directories in spec file.


author: Alasdair Kergon <agk@redhat.com> - 2.02.28-1
changelog:
  - vgscan and pvscan now trigger clvmd -R, which should now work.
  - Fix clvmd logging so you can get lvm-level debugging out of it.
  - Allow clvmd debug to be turned on in a running daemon using clvmd -d [-C].
  - Add more cluster info to lvmdump.
  - Fix lvdisplay man page to say LV size is reported in sectors, not KB.
  - Fix loading of persistent cache if cache_dir is used.
  - Only permit --force, --verbose and --debug arguments to be repeated.
  - Add support for renaming mirrored LVs.
  - Add --mirrorlog argument to specify log type for mirrors.
  - Don't leak a file descriptor if flock or fcntl fails.
  - Detect stream write failure reliably.
  - Reduce severity of lstat error messages to very_verbose.
  - Update to use autoconf 2.61, while still supporting 2.57.


author: Alasdair Kergon <agk@redhat.com> - 2.02.29-1
changelog:
  - Make clvmd backup vg metadata on remote nodes.
  - Decode cluster locking state in log message.
  - Change file locking state messages from debug to very verbose.
  - Fix --addtag to drop @ prefix from name.
  - Stop clvmd going haywire if a pre_function fails.
  - Avoid nested vg_reads when processing PVs in VGs and fix associated locking.
  - Attempt to remove incomplete LVs with lvcreate zeroing/activation problems.
  - Add full read_ahead support.
  - Add lv_read_ahead and lv_kernel_read_ahead fields to reports and lvdisplay.
  - Prevent lvconvert -s from using same LV as origin and snapshot.
  - Fix human-readable output of odd numbers of sectors.
  - Add pv_mda_free and vg_mda_free fields to reports for raw text format.
  - Add LVM2 version to 'Generated by' comment in metadata.
  - Show 'not usable' space when PV is too large for device in pvdisplay.
  - Ignore and fix up any excessive device size found in metadata.
  - Fix error message when fixing up PV size in lvm2 metadata (2.02.11).
  - Fix orphan-related locking in pvdisplay and pvs.
  - Fix missing VG unlocks in some pvchange error paths.
  - Add some missing validation of VG names.
  - Detect md superblocks version 1.0, 1.1 and 1.2.
  - Add some pv-related error paths.
  - Handle future sysfs subsystem/block/devices directory structure.
  - Fix a bug in lvm_dump.sh checks for lvm/dmsetup binaries.
  - Fix underquotations in lvm_dump.sh.
  - Print --help output to stdout, not stderr.
  - After a cmdline processing error, don't print help text but suggest --help.
  - Add %PVS extents option to lvresize, lvextend, and lvcreate.
  - Remove no-longer-correct restrictions on PV arg count with stripes/mirrors.
  - Fix strdup memory leak in str_list_dup().
  - Link with -lpthread when static SELinux libraries require that.
  - Detect command line PE values that exceed their 32-bit range.
  - Include strerror string in dev_open_flags' stat failure message.
  - Avoid error when --corelog is provided without --mirrorlog. (2.02.28)
  - Correct --mirrorlog argument name in man pages (not --log).
  - Clear MIRROR_NOTSYNCED LV flag when converting from mirror to linear.
  - Modify lvremove to prompt for removal if LV active on other cluster nodes.
  - Add '-f' to vgremove to force removal of VG even if LVs exist.


author: Alasdair Kergon <agk@redhat.com> - 2.02.30-6
changelog:
  - Remove static libraries and binaries and move most binaries out of /usr.
  - Fix a segfault if using pvs with --all argument.
  - Fix vgreduce PV list processing not to process every PV in the VG.
  - Reinstate VG extent size and stripe size defaults (halved).
  - Set default readahead to twice maximium stripe size.
  - Detect non-orphans without MDAs correctly.
  - Prevent pvcreate from overwriting MDA-less PVs belonging to active VGs.
  - Don't use block_on_error with mirror targets version 1.12 and above.
  - Change vgsplit -l (for unimplemented --list) into --maxlogicalvolumes.
  - Update vgsplit to accept vgcreate options when new VG is destination.
  - Update vgsplit to accept existing VG as destination.
  - Major restructuring of pvmove and lvconvert code, adding stacking support.
  - Add new convert_lv field to lvs output.
  - Permit LV segment fields with PV segment reports.
  - Extend lvconvert to use polldaemon and wait for completion of initial sync.
  - Add seg_start_pe and seg_pe_ranges to reports.
  - Add fsadm interface to filesystem resizing tools.
  - Update --uuid argument description in man pages.
  - Print warning when lvm tools are running as non-root.


author: Alasdair Kergon <agk@redhat.com> - 2.02.31-7
changelog:
  - Avoid readahead error message when using default setting of lvcreate -M1.
  - Fix lvcreate --nosync not to wait for non-happening sync.
  - Add very_verbose lvconvert messages.


author: Alasdair Kergon <agk@redhat.com> - 2.02.32-8
changelog:
  - Fix pvs, vgs, lvs error exit status on some error paths.
  - Fix new parameter validation in vgsplit and test mode.
  - Fix internal metadata corruption in lvchange --resync.


author: Alasdair Kergon <agk@redhat.com> - 2.02.33-9
changelog:
  - Improve internal label caching performance while locks are held.
  - Fix mirror log name construction during lvconvert.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-1
changelog:
  - libdevmapper: Make dm_hash_iter safe against deletion.
  - libdevmapper: Accept a NULL pointer to dm_free silently.
  - libdevmapper: Calculate string size within dm_pool_grow_object.
  - libdevmapper: Send reporting field help text to stderr not stdout.

  - dmsetup: Add tables_loaded, readonly and suspended columns to reports.
  - dmsetup: Add --nameprefixes for new report output format FIELD=VALUE.

  - Add --nameprefixes to reporting tools for field name prefix output format.
  - Fix return values for reporting commands when run with no PVs, LVs, or VGs.
  - Add omitted unlock_vg() call when sigint_caught() during vg processing.
  - Fix free_count when reading pool metadata.
  - Fix segfault when using pvcreate on a device containing pool metadata.
  - In script-processing mode, stop if any command fails.
  - Warn if command exits with non-zero status code without a prior log_error.
  - Correct config file line numbers in messages when parsing comments.
  - Add missing deactivation after activation failure in lvcreate -Zy.
  - When removing LV symlinks, skip any where the VG name is not determined.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Avoid spurious duplicate VG messages referring to VGs that are gone.
  - Drop dev_name_confirmed error message to debug level.
  - Fix setpriority error message to signed int.
  - Add assertions to trap deprecated P_ and V_ lock usage.
  - Avoid using DLM locks with LCK_CACHE type P_ lock requests.
  - Don't touch /dev in vgrename if activation is disabled.
  - Exclude VG_GLOBAL from internal concurrent VG lock counter.
  - Fix vgmerge snapshot_count when source VG contains snapshots.
  - Fix internal LV counter when a snapshot is removed.
  - Fix metadata corruption writing lvm1-formatted metadata with snapshots.
  - Fix lvconvert -m0 allocatable space check.
  - Don't attempt remote metadata backups of non-clustered VGs.
  - Improve preferred_names lvm.conf example.
  - Fix vgdisplay 'Cur LV' field to match lvdisplay output.
  - Fix lv_count report field to exclude hidden LVs.
  - Fix some pvmove error status codes.
  - Indicate whether or not VG is clustered in vgcreate log message.
  - Mention default --clustered setting in vgcreate man page.
  - Fix vgreduce to use vg_split_mdas to check sufficient mdas remain.
  - Update lvmcache VG lock state for all locking types now.
  - Fix output if overriding command_names on cmdline.
  - Add check to vg_commit() ensuring VG lock held before writing new VG metadata.
  - Add validation of LV name to pvmove -n.
  - Add some basic internal VG lock validation.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Fix vgsplit locking of new VG.
  - Avoid erroneous vgsplit error message for new VG.
  - Suppress duplicate message when lvresize fails because of invalid vgname.
  - Cache VG metadata internally while VG lock is held.
  - Fix redundant lvresize message if vg doesn't exist.
  - Make clvmd-cman use a hash rather than an array for node updown info.
  - Decode numbers in clvmd debugging output.
  - Fix uninitialised mutex in clvmd if all daemons are not running at startup.
  - Add config file overrides to clvmd when it reads the active LVs list.
  - Make clvmd refresh the context correctly when lvm.conf is updated.
  - Fix another allocation bug with clvmd and large node IDs.
  - Fix uninitialised variable in clvmd that could cause odd hangs.
  - Correct command name in lvmdiskscan man page.
  - clvmd no longer crashes if it sees nodeids over 50.
  - Fix potential deadlock in clvmd thread handling.
  - Update usage message for clvmd.
  - Fix clvmd man page not to print <br> and clarified debug options.
  - Escape double quotes and backslashes in external metadata and config data.
  - Correct a function name typo in _line_append error message.
  - Fix resetting of MIRROR_IMAGE and VISIBLE_LV after removal of LV.
  - Fix remove_layer_from_lv to empty the LV before removing it.
  - Add missing no-longer-used segs_using_this_lv test to check_lv_segments.
  - Fix lvconvert detection of mirror conversion in progress.
  - Avoid automatic lvconvert polldaemon invocation when -R specified.
  - Fix 'pvs -a' to detect VGs of PVs without metadata areas.
  - Divide up internal orphan volume group by format type.
  - Fix lvresize to support /dev/mapper prefix in the LV name.
  - Fix lvresize to pass new size to fsadm when extending device.
  - Fix unfilled parameter passed to fsadm from lvresize.
  - Update fsadm to call lvresize if the partition size differs (with option -l).
  - Fix fsadm to support VG/LV names.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-2
changelog:
  - dmsetup: Add --unquoted and --rows to 'info -c' command.
  - libdevmapper: Fix inverted no_flush debug message.


author: Alasdair Kergon <agk@redhat.com> - 2.02.39-3
changelog:
  - Fix up cache for PVs without mdas after consistent VG metadata is processed.
  - Update validation of safe mirror log type conversions in lvconvert.
  - Fix lvconvert to disallow snapshot and mirror combinations.
  - Fix reporting of LV fields alongside unallocated PV segments.
  - Add --unquoted and --rows to reporting tools.
  - Avoid undefined status code after _memlock commands in lvm shell.
  - Fix and improve readahead 'auto' calculation for stripe_size.
  - Fix lvchange output for -r auto setting if auto is already set.
  - Fix add_mirror_images not to dereference uninitialized log_lv upon failure.
  - Add --force to lvextend and lvresize.
  - Fix vgchange to not activate component mirror volumes directly.


author: Fabio M. Di Nitto <fdinitto@redhat.cm> - 2.02.39-5
changelog:
  - Add BuildRequires on cmanlib-devel. This is required after libcman split
    from cman and cman-devel into cmanlib and cmanlib-devel.
  - Make versioned BuildRequires on cman-devel and cmanlib-devel more strict
    to guarantee to get the right version.


author: Alasdair Kergon <agk@redhat.com> - 2.02.43-1
changelog:
  - Upstream merge of device-mapper and lvm2 source.
  - Correct prototype for --permission on lvchange and lvcreate man pages.
  - Exit with non-zero status from vgdisplay if couldn't show any requested VG.
  - libdevmapper.pc: Use simplified x.y.z version number.
  - Accept locking fallback_to_* options in the global section as documented.
  - Several fixes to lvconvert involving mirrors.
  - Avoid overwriting in-use on-disk text metadata when metadataarea fills up.
  - Generate man pages from templates and include version.
  - Fix misleading error message when there are no allocatable extents in VG.
  - Fix handling of PVs which reappeared with old metadata version.
  - Fix validation of --minor and --major in lvcreate to require -My always.
  - Allow lvremove to remove LVs from VGs with missing PVs.
  - In VG with PVs missing, by default allow activation of LVs that are complete.
  - Require --force with --removemissing in vgreduce to remove partial LVs.
  - No longer write out PARTIAL flag into metadata backups.
  - Treat new default activation/missing_stripe_filler "error" as an error target.
  - Add devices/md_chunk_alignment to lvm.conf.
  - Pass struct physical_volume to pe_align and adjust for md chunk size.
  - Avoid shuffling remaining mirror images when removing one, retaining primary.
  - Prevent resizing an LV while lvconvert is using it.
  - Avoid repeatedly wiping cache while VG_GLOBAL is held in vgscan & pvscan.
  - Fix pvresize to not allow resize if PV has two metadata areas.
  - Fix setting of volume limit count if converting to lvm1 format.
  - Fix vgconvert logical volume id metadata validation.
  - Fix lvmdump metadata gather option (-m) to work correctly.
  - Fix allocation bug in text metadata format write error path.
  - Fix vgcfgbackup to properly check filename if template is used.
  - vgremove tries to remove lv snapshot first.
  - Improve file descriptor leak detection to display likely culprit and filename.
  - Avoid looping forever in _pv_analyze_mda_raw used by pvck.
  - Change lvchange exit status to indicate if any part of the operation failed.
  - Fix pvchange and pvremove to handle PVs without mdas.
  - Fix pvchange -M1 -u to preserve existing extent locations when there's a VG.
  - Cease recognising snapshot-in-use percentages returned by early devt kernels.
  - Add backward-compatible flags field to on-disk format_text metadata.
  - libdevmapper: Only resume devices in dm_tree_preload_children if size changes.
  - libdevmapper: Extend deptree buffers so the largest possible device numbers fit.
  - libdevmapper: Underline longer report help text headings.


author: Alasdair Kergon <agk@redhat.com> - 2.02.44-1
changelog:
  - Add --nameprefixes, --unquoted, --rows to pvs, vgs, lvs man pages.
  - Fix lvresize size conversion for fsadm when block size is not 1K.
  - Fix pvs segfault when run with orphan PV and some VG fields.
  - Display a 'dev_size' of zero for missing devices in reports.
  - Add pv_mda_size to pvs and vg_mda_size to vgs.
  - Fix lvmdump /sys listing to include virtual devices directory.
  - Add "--refresh" functionality to vgchange and vgmknodes.
  - Avoid exceeding LV size when wiping device.
  - Calculate mirror log size instead of using 1 extent.
  - Ensure requested device number is available before activating with it.
  - Fix incorrect exit status from 'help <command>'.
  - Fix vgrename using UUID if there are VGs with identical names.
  - Fix segfault when invalid field given in reporting commands.
  - Use better random seed value in temp file creation.
  - Add read_urandom to read /dev/urandom. Use in uuid calculation.
  - Fix race in vgcreate that would result in second caller overwriting first.
  - Fix uninitialised lv_count in vgdisplay -c.
  - Don't skip updating pvid hash when lvmcache_info struct got swapped.
  - Fix startup race in clvmd.
  - Cope with snapshot dependencies when removing a whole VG with lvremove.
  - Make man pages and tool help text consistent using | for alternative options.
  - Add "all" field to reports expanding to all fields of report type.
  - Enforce device name length and character limitations in libdm.


author: Alasdair Kergon <agk@redhat.com> - 2.02.45-1
changelog:
  - Update clusterlib and corosync dependencies.
  - Attempt proper clean up in child before executing fsadm or modprobe.
  - Do not scan devices if reporting only attributes from PV label.
  - Use pkgconfig to obtain corosync library details during configuration.
  - Fix error returns in clvmd-corosync interface to DLM.
  - Add --refresh to vgchange and vgmknodes man pages.
  - Pass --test from lvresize to fsadm as --dry-run.
  - Prevent fsadm from checking mounted filesystems.
  - No longer treats any other key as 'no' when prompting in fsadm.
  - Add --dataalignment to pvcreate to specify alignment of data area.
  - Fix unblocking of interrupts after several commands.
  - Provide da and mda locations in debug message when writing text format label.
  - Mention the restriction on file descriptors at invocation on the lvm man page.
  - Index cached vgmetadata by vgid not vgname to cope with duplicate vgnames.
  - No longer require kernel and metadata major numbers to match.
  - If kernel supports only one dm major number, use in place of any supplied.
  - Add option to /etc/sysconfig/cluster to select cluster type for clvmd.
  - Allow clvmd to start up if its lockspace already exists.
  - Separate PV label attributes which do not need parse metadata when reporting.
  - Remove external dependency on the 'cut' command from fsadm.
  - Fix pvs segfault when pv mda attributes requested for unavailable PV.
  - Add fsadm support for reszing ext4 filesysystems.
  - Change lvm2-cluster to corosync instead of cman.
  - Fix some old changelog typos in email addresses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.47-1
changelog:
  - Inherit readahead setting from underlying devices during activation.
  - Detect LVs active on remote nodes by querying locks if supported.
  - Enable online resizing of mirrors.
  - Use suspend with flush when device size was changed during table preload.
  - Implement query_resource_fn for cluster_locking.
  - Support query_resource_fn in locking modules.
  - Fix pvmove to revert operation if temporary mirror creation fails.
  - Fix metadata export for VG with missing PVs.
  - Add vgimportclone and install it and the man page by default.
  - Force max_lv restriction only for newly created LV.
  - Do not query nonexistent devices for readahead.
  - Reject missing PVs from allocation in toollib.
  - Fix PV datalignment for values starting prior to MDA area. (2.02.45)
  - Add sparse devices: lvcreate -s --virtualoriginsize (hidden zero origin).
  - Fix minimum width of devices column in reports.
  - Add lvs origin_size field.
  - Implement lvconvert --repair for repairing partially-failed mirrors.
  - Fix vgreduce --removemissing failure exit code.
  - Fix remote metadata backup for clvmd.
  - Fix metadata backup to run after vg_commit always.
  - Fix pvs report for orphan PVs when segment attributes are requested.
  - Fix pvs -a output to not read volume groups from non-PV devices.
  - Introduce memory pools per volume group (to reduce memory for large VGs).
  - Always return exit error status when locking of volume group fails.
  - Fix mirror log convert validation question.
  - Enable use of cached metadata for pvs and pvdisplay commands.
  - Fix memory leak in mirror allocation code.
  - Save and restore the previous logging level when log level is changed.
  - Fix error message when archive initialization fails.
  - Make sure clvmd-corosync releases the lockspace when it exits.
  - Fix segfault for vgcfgrestore on VG with missing PVs.
  - Block SIGTERM & SIGINT in clvmd subthreads.
  - Detect and conditionally wipe swapspace signatures in pvcreate.
  - Fix maximal volume count check for snapshots if max_lv set for volume group.
  - Fix lvcreate to remove unused cow volume if the snapshot creation fails.
  - Fix error messages when PV uuid or pe_start reading fails.
  - Flush memory pool and fix locking in clvmd refresh and backup command.
  - Fix unlocks in clvmd-corosync. (2.02.45)
  - Fix error message when adding metadata directory to internal list fails.
  - Fix size and error message of memory allocation at backup initialization.
  - Remove old metadata backup file after renaming VG.
  - Restore log_suppress state when metadata backup file is up-to-date.
  - Export dm_tree_node_size_changed() from libdevmapper.
  - Fix segfault when getopt processes dmsetup -U, -G and -M options.
  - Add _smp_mflags to compilation and remove DESTDIR.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.47-2
changelog:
  - BuildRequire newer version of corosynclib (0.97-1) to link against
    latest libraries version (soname 4.0.0).
  - Add lvm2-2_02_48-cluster-cpg-new-api.patch to port clvmd-corosync
    to new corosync cpg API.


author: Alasdair Kergon <agk@redhat.com> - 2.02.48-1
changelog:
  - Abort if automatic metadata correction fails when reading VG to update it.
  - Don't fallback to default major number in libdm: use dm_task_set_major_minor.
  - Explicitly request fallback to default major number in device mapper.
  - Ignore suspended devices during repair.
  - Suggest using lvchange --resync when adding leg to not-yet-synced mirror.
  - Destroy toolcontext on clvmd exit to avoid memory pool leaks.
  - Fix lvconvert not to poll mirror if no conversion in progress.
  - Fix memory leaks in toolcontext error path.
  - Reinstate partial activation support in clustered mode.
  - Allow metadata correction even when PVs are missing.
  - Use 'lvm lvresize' instead of 'lvresize' in fsadm.
  - Do not use '-n' realine option in fsadm for rescue disk compatiblity.
  - Round up requested readahead to at least one page and print warning.
  - Try to repair vg before actual vgremove when force flag provided.
  - Unify error messages when processing inconsistent volume group.
  - Introduce lvconvert --use_policies (repair policy according to lvm.conf).
  - Fix rename of active snapshot with virtual origin.
  - Fix convert polling to ignore LV with different UUID.
  - Cache underlying device readahead only before activation calls.
  - Fix segfault when calculating readahead on missing device in vgreduce.
  - Remove verbose 'visited' messages.
  - Handle multi-extent mirror log allocation when smallest PV has only 1 extent.
  - Add LSB standard headers and functions (incl. reload) to clvmd initscript.
  - When creating new LV, double-check that name is not already in use.
  - Remove /dev/vgname/lvname symlink automatically if LV is no longer visible.
  - Rename internal vorigin LV to match visible LV.
  - Suppress 'removed' messages displayed when internal LVs are removed.
  - Fix lvchange -a and -p for sparse LVs.
  - Fix lvcreate --virtualsize to activate the new device immediately.
  - Make --snapshot optional with lvcreate --virtualsize.
  - Generalise --virtualoriginsize to --virtualsize.
  - Skip virtual origins in process_each_lv_in_vg() without --all.
  - Fix counting of virtual origin LVs in vg_validate.
  - Attempt to load dm-zero module if zero target needed but not present.
  - Add crypt target handling to libdevmapper tree nodes.
  - Add splitname command to dmsetup.
  - Add subsystem, vg_name, lv_name, lv_layer fields to dmsetup reports.
  - Make mempool optional in dm_split_lvm_name() in libdevmapper.


author: Fabio M. Di Nitto <fdinitto@redhat.com> 2.02.48-2
changelog:
  - BuildRequires and Requires on stable versions of both corosync-lib (1.0.0-1)
    and cluster-lib (3.0.0-20).


author: Alasdair Kergon <agk@redhat.com> - 2.02.49-1
changelog:
  - Exclude VG_GLOBAL from vg_write_lock_held so scans open devs read-only again.
  - Fix dev name mismatch in vgcreate man page example.
  - Check md devices for a partition table during device scan.
  - Add extended device (blkext) and md partition (mdp) types to filters.
  - Make text metadata read errors for segment areas more precise.
  - Fix text segment metadata read errors to mention correct segment name.
  - Include segment and LV names in text segment import error messages.
  - Fix memory leak in vgsplit when re-reading the vg.
  - Permit several segment types to be registered by a single shared object.
  - Update the man pages to document size units uniformly.
  - Allow commandline sizes to be specified in terms of bytes and sectors.
  - Update 'md_chunk_alignment' to use stripe-width to align PV data area.
  - Fix segfault in vg_release when vg->cmd is NULL.
  - Add dm_log_with_errno and dm_log_with_errno_init, deprecating the old fns.
  - Fix whitespace in linear target line to fix identical table line detection.
  - Add device number to more log messages during activation.


author: Alasdair Kergon <agk@redhat.com> - 2.02.50-1
changelog:
  - Add libs and devel subpackages to include shared libraries for applications.
    N.B. The liblvm2app API is not frozen yet and may still be changed
    Send any feedback to the mailing list lvm-devel@redhat.com.
  - Remove obsolete --with-dmdir from configure.
  - Add global/wait_for_locks to lvm.conf so blocking for locks can be disabled.
  - Fix race condition with vgcreate and vgextend on same device since 2.02.49.
  - Add an API version number, LVM_LIBAPI, to the VERSION string.
  - Return EINVALID_CMD_LINE not success when invalid VG name format is used.
  - Remove unnecessary messages after vgcreate/vgsplit code change in 2.02.49.
  - Store any errno and error messages issued while processing each command.


author: Alasdair Kergon <agk@redhat.com> - 2.02.51-2
changelog:
  - Fix clvmd locking broken in 2.02.50-1.
  - Only change LV /dev symlinks on ACTIVATE not PRELOAD (so not done twice).
  - Make lvconvert honour log mirror options combined with downconversion.
  - Add devices/data_alignment_detection to lvm.conf.
  - Add devices/data_alignment_offset_detection to lvm.conf.
  - Add --dataalignmentoffset to pvcreate to shift start of aligned data area.
  - Update synopsis in lvconvert manpage to mention --repair.
  - Document -I option of clvmd in the man page.


author: Milan Broz <mbroz@redhat.com> - 2.02.51-3
changelog:
  - Fix global locking in PV reporting commands (2.02.49).
  - Fix pvcreate on a partition (2.02.51).
  - Build clvmd with both cman and corosync support.


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-1
changelog:
  - Prioritise write locks over read locks by default for file locking.
  - Add local lock files with suffix ':aux' to serialise locking requests.
  - Fix readonly locking to permit writeable global locks (for vgscan). (2.02.49)
  - Make readonly locking available as locking type 4.
  - Fix global locking in PV reporting commands (2.02.49).
  - Make lvchange --refresh only take a read lock on volume group.
  - Fix race where non-blocking file locks could be granted in error.
  - Fix pvcreate string termination in duplicate uuid warning message.
  - Don't loop reading sysfs with pvcreate on a non-blkext partition (2.02.51).
  - Fix vgcfgrestore error paths when locking fails (2.02.49).
  - Make clvmd check corosync to see what cluster interface it should use.
  - Fix vgextend error path - if ORPHAN lock fails, unlock / release vg (2.02.49).
  - Clarify use of PE ranges in lv{convert|create|extend|resize} man pages.
  - Restore umask when device node creation fails.
  - Check kernel vsn to use 'block_on_error' or 'handle_errors' in mirror table.


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-2
changelog:
  - Build dmeventd and place into a separate set of subpackages.
  - Remove no-longer-needed BuildRoot tag and buildroot emptying at install.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.52-3
changelog:
  - Enable udev synchronisation code.
  - Install default udev rules for device-mapper and LVM2.
  - Add BuildRequires: libudev-devel.
  - Add Requires: libudev (to check udev is running).
  - Add Requires: util-linux-ng (blkid used in udev rules).


author: Alasdair Kergon <agk@redhat.com> - 2.02.53-1
changelog:
  - Create any directories in /dev with umask 022. (#507397)
  - Handle paths supplied to dm_task_set_name by getting name from /dev/mapper.
  - Add splitname and --yes to dmsetup man page.


author: Alasdair Kergon <agk@redhat.com> - 2.02.54-1
changelog:
  - Add implict pvcreate support to vgcreate and vgextend.
  - Add --pvmetadatacopies for pvcreate, vgcreate, vgextend, vgconvert.
  - Distinguish between powers of 1000 and powers of 1024 in unit suffixes.
  - Restart lvconverts in vgchange.
  - Don't attempt to deactivate an LV if any of its snapshots are in use.
  - Return error if lv_deactivate fails to remove device from kernel.
  - Treat input units of both 's' and 'S' as 512-byte sectors.  (2.02.49)
  - Use standard output units for 'PE Size' and 'Stripe size' in pv/lvdisplay.
  - Add global/si_unit_consistency to enable cleaned-up use of units in output.
  - Only do lock conversions in clvmd if we are explicitly asked for one.
  - Fix clvmd segfault when refresh_toolcontext fails.
  - Cleanup mimagetmp LV if allocation fails for new lvconvert mimage.
  - Handle metadata with unknown segment types more gracefully.
  - Make clvmd return 0 on success rather than 1.
  - Correct example.conf to indicate that lvm2 not lvm1 is the default format.
  - Delay announcing mirror monitoring to syslog until initialisation succeeded.
  - Update lvcreate/lvconvert man pages to explain PhysicalVolume parameter.
  - Document --all option in man pages and cleanup {pv|vg|lv}{s|display} pages.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.54-2
changelog:
  - Enable udev synchronisation code.
  - Install default udev rules for device-mapper and LVM2.
  - Add BuildRequires: libudev-devel.
  - Add Requires: libudev (to check udev is running).
  - Add Requires: util-linux-ng (blkid used in udev rules).
  - Add Conflicts: dracut < 002-18 (for dracut to install required udev rules)


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.54-3
changelog:
  - Support udev flags even when udev_sync is disabled.
  - Remove last_rule from udev_rules.
  - Udev rules cleanup.


author: Alasdair Kergon <agk@redhat.com> - 2.02.55-1
changelog:
  - Fix deadlock when changing mirrors due to unpaired memlock refcount changes.
  - Fix pvmove region_size overflow for very large PVs.
  - Fix lvcreate and lvresize %PVS argument always to use sensible total size.
  - Directly restrict vgchange to activating visible LVs.
  - Fix hash lookup segfault when keys compared are different lengths.
  - Flush stdout after yes/no prompt.
  - Recognise DRBD devices and handle them like md devices.
  - Add dmsetup --inactive support (requires kernel support targetted for 2.6.33).


author: Alasdair Kergon <agk@redhat.com> - 2.02.56-2
changelog:
  - Revert vg_read_internal change as clvmd was not ready for vg_read. (2.02.55)
  - Fix unbalanced memory locking when deactivating LVs.
  - Add missing vg_release to pvs and pvdisplay to fix memory leak.
  - Do not try to unlock VG which is not locked when processing a VG.
  - Update .cache file after every full device rescan in clvmd.
  - Refresh all device filters (including sysfs) before each full device rescan.
  - Return error status if vgchange fails to activate any volume.


author: Alasdair Kergon <agk@redhat.com> - 2.02.57-1
changelog:
  - Add --splitmirrors to lvconvert to split off part of a mirror.
  - Allow vgremove to remove a VG with PVs missing after a prompt.
  - Add activation/udev_rules config option in lvm.conf.
  - Add --poll flag to vgchange and lvchange to control background daemon launch.
  - Impose limit of 8 mirror images to match the in-kernel kcopyd restriction.
  - Log failure type and recognise type 'F' (flush) in dmeventd mirror plugin.
  - Add --noudevrules option for dmsetup to disable /dev node management by udev.
  - Fix 'dmsetup info -c -o all' to show all fields.
  - Fix coredump and memory leak for 'dmsetup help -c'.
  - Rename mirror_device_fault_policy to mirror_image_fault policy.
  - Use extended status of new kernel snapshot target 1.8.0 to detect when empty.
  - Allow use of precommitted metadata when a PV is missing.
  - Add global/abort_on_internal_errors to lvm.conf to assist testing.
  - If aborting due to internal error, always send that message to stderr.
  - Keep log type consistent when changing mirror image count.
  - Exit with success in lvconvert --repair --use-policies on failed allocation.
  - Ensure any background daemon exits without duplicating parent's functionality.
  - Change background daemon process names to "(lvm2)".
  - Fix internal lock state after forking.
  - Remove empty PV devices if lvconvert --repair is using defined policies.
  - Use fixed buffer to prevent stack overflow in persistent filter dump.
  - Propagate metadata commit and revert notifications to other cluster nodes.
  - Fix metadata caching and lock state propagation to remote nodes in clvmd.
  - Properly decode all flags in clvmd messages including VG locks.
  - Drop cached metadata after device was auto-repaired and removed from VG.
  - Clear MISSING_PV flag if PV reappeared and is empty.
  - Fix removal of multiple devices from a mirror.
  - Also clean up PVs flagged as missing in vgreduce --removemissing --force.
  - Fix some pvresize and toollib error paths with missing VG releases/unlocks.
  - Explicitly call suspend for temporary mirror layer.
  - Add memlock information to do_lock_lv debug output.
  - Always bypass calls to remote cluster nodes for non-clustered VGs.
  - Permit implicit cluster lock conversion in pre/post callbacks on local node.
  - Permit implicit cluster lock conversion to the lock mode already held.
  - Fix lock flag masking in clvmd so intended code paths get invoked.
  - Remove newly-created mirror log from metadata if initial deactivation fails.
  - Improve pvmove error message when all source LVs are skipped.
  - Fix memlock imbalance in lv_suspend if already suspended.
  - Fix pvmove test mode not to poll (and fail).
  - Fix vgcreate error message if VG already exists.
  - Fix tools to use log_error when aborted due to user response to prompt.
  - Fix ignored readahead setting in lvcreate --readahead.
  - Fix clvmd memory leak in lv_info_by_lvid by calling release_vg.
  - If LVM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - If DM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - Always set environment variables for an LVM2 device in 11-dm-lvm.rules.
  - Disable udev rules for change events with DISK_RO set.
  - Add dm_tree_add_dev_with_udev_flags to provide wider support for udev flags.
  - Correct activated or deactivated text in vgchange summary message.
  - Fix fsadm man page typo (fsdam).


author: Alasdair Kergon <agk@redhat.com> - 2.02.58-1
changelog:
  - Fix clvmd automatic target module loading crash.
  - Fix allocation code not to stop at the first area of a PV that fits.
  - Add support for the "snapshot-merge" kernel target (2.6.33-rc1).
  - Add --merge to lvconvert to merge a snapshot into its origin.


author: Alasdair Kergon <agk@redhat.com> - 2.02.59-1
changelog:
  - Add cmirror subpackage for clustered mirrors.
  - Set 'preferred_names' in default lvm.conf.
  - Add libdevmapper-event-lvm2.so to serialise dmeventd plugin liblvm2cmd use.
  - Stop dmeventd trying to access already-removed snapshots.
  - Fix clvmd to never scan suspended devices.
  - Fix detection of completed snapshot merge.
  - Improve snapshot merge metadata import validation.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.59-2
changelog:
  - Drop duplicated BuildRequires on openaislib-devel.
  - Drop Requires on clusterlib for cmirror subpackage.
  - clvmd subpackage should Requires cman (#506592).


author: Alasdair Kergon <agk@redhat.com> - 2.02.59-3
changelog:
  - Fix dmeventd lvm2 wrapper (plug-ins unusable in last build).
  - Make failed locking initialisation messages more descriptive.


author: Alasdair Kergon <agk@redhat.com> - 2.02.60-4
changelog:
  - Extend cmirrord man page.
  - Sleep before first progress check iff pvmove/lvconvert interval has prefix '+'.
  - Fix cmirror initscript syntax problems.
  - Fix first syslog message prefix for dmeventd plugins.
  - Make failed locking initialisation messages more descriptive.


author: Alasdair Kergon <agk@redhat.com> - 2.02.61-1
changelog:
  - Add %ORIGIN support to lv{create,extend,reduce,resize} --extents.
  - Accept a list of LVs with 'lvconvert --merge @tag' using process_each_lv.
  - Remove false "failed to find tree node" error when activating merging origin.
  - Exit with success when lvconvert --repair --use-policies performs no action.
  - Avoid unnecessary second resync when adding mimage to core-logged mirror.
  - Make clvmd -V return status zero.
  - Fix cmirrord segfault in clog_cpg list processing when converting mirror log.
  - Deactivate temporary pvmove mirror cluster-wide when activating it fails.
  - Add missing metadata vg_reverts in pvmove error paths.
  - Unlock shared lock in clvmd if activation calls fail.
  - Add lvm_pv_get_size, lvm_pv_get_free and lvm_pv_get_dev_size to lvm2app.
  - Change lvm2app to return all sizes in bytes as documented (not sectors).
  - Exclude internal VG names and uuids from lists returned through lvm2app.
  - Add LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable.
  - Add DM_UDEV_DISABLE_LIBRARY_FALLBACK udev flag to rely on udev only.
  - Remove hard-coding that skipped _mimage devices from 11-dm-lvm.rules.
  - Export dm_udev_create_cookie function to create new cookies on demand.
  - Add --udevcookie, udevcreatecookie and udevreleasecookie to dmsetup.
  - Set udev state automatically instead of using DM_UDEV_DISABLE_CHECKING.
  - Set udev state automatically instead of using LVM_UDEV_DISABLE_CHECKING.
  - Remove pointless versioned symlinks to dmeventd plugin libraries.


author: Alasdair Kergon <agk@redhat.com> - 2.02.62-1
changelog:
  - Rewrite clvmd init script.
  - Add default alternative to mlockall using mlock to reduce pinned memory size.
  - Add use_mlockall and mlock_filter to activation section of lvm.conf.
  - Handle misaligned devices that report alignment_offset of -1.
  - Extend core allocation code in preparation for mirrored log areas.
  - No longer fall back to looking up active devices by name if uuid not found.
  - Don't touch /dev in vgmknodes if activation is disabled.
  - Add --showkeys parameter description to dmsetup man page.
  - Add --help option as synonym for help command.
  - Add lvm2app functions lvm_{vg|lv}_{get|add|remove}_tag() functions.
  - Refactor snapshot-merge deptree and device removal to support info-by-uuid.


author: Alasdair Kergon <agk@redhat.com> - 2.02.63-1
changelog:
  - Move development links to shared objects to /usr (hard-coded temporarily).
  - Change libdevmapper deactivation to fail if device is open.
  - Wipe memory buffers for libdevmapper dm-ioctl parameters before releasing.
  - Strictly require libudev if udev_sync is used.
  - Add support for ioctl's DM_UEVENT_GENERATED_FLAG.
  - Allow incomplete mirror restore in lvconvert --repair upon insufficient space.
  - Do not reset position in metadata ring buffer on vgrename and vgcfgrestore.
  - Allow VGs with active LVs to be renamed.
  - Only pass visible LVs to tools in cmdline VG name/tag expansions without -a.
  - Use C locale and mlockall in clvmd and dmeventd.
  - Mask LCK_HOLD in cluster VG locks for upgrade compatibility with older clvmd.
  - Add activation/polling_interval to lvm.conf as --interval default.
  - Don't ignore error if resuming any LV fails when resuming groups of LVs.
  - Skip closing persistent filter cache file if open failed.
  - Permit mimage LVs to be striped in lvcreate, lvresize and lvconvert.
  - Fix pvmove allocation to take existing parallel stripes into account.
  - Fix incorrect removal of symlinks after LV deactivation fails.
  - Fix is_partitioned_dev not to attempt to reopen device.
  - Fix another thread race in clvmd.
  - Improve vg_validate to detect some loops in lists.
  - Change most remaining log_error WARNING messages to log_warn.
  - Always use blocking lock for VGs and orphan locks.
  - Allocate all memory for segments from private VG mempool.
  - Optimise searching PV segments for seeking the most recently-added.
  - Remove duplicated vg_validate checks when parsing cached metadata.
  - Use hash table of LVs to speed up parsing of text metadata with many LVs.
  - Fix two vg_validate messages, adding whitespace and parentheses.
  - When dmeventd is not forking because of -d flag, don't kill parent process.
  - Fix dso resource leak in error path of dmeventd.
  - Fix --alloc contiguous policy only to allocate one set of parallel areas.
  - Do not allow {vg|lv}change --ignoremonitoring if on clustered VG.
  - Add ability to create mirrored logs for mirror LVs.
  - Fix clvmd cluster propagation of dmeventd monitoring mode.
  - Allow ALLOC_ANYWHERE to split contiguous areas.
  - Add some assertions to allocation code.
  - Introduce pv_area_used into allocation algorithm and add debug messages.
  - Add activation/monitoring to lvm.conf.
  - Add --monitor and --ignoremonitoring to lvcreate.
  - Don't allow resizing of internal logical volumes.
  - Fix libdevmapper-event pkgconfig version string to match libdevmapper.
  - Avoid scanning all pvs in the system if operating on a device with mdas.
  - Disable long living process flag in lvm2app library.
  - Fix pvcreate device md filter check.
  - Suppress repeated errors about the same missing PV uuids.
  - Bypass full device scans when using internally-cached VG metadata.
  - Only do one full device scan during each read of text format metadata.
  - Look up missing PVs by uuid not dev_name in pvs to avoid invalid stat.


author: Alasdair Kergon <agk@redhat.com> - 2.02.63-2
changelog:
  - Remove 'lvmconf --lockinglibdir' from cluster post: locking is now built-in.
  - Move libdevmapper-event-lvm2.so to devel package.
  - Explicitly specify libdevmapper-event.so* attributes.
  - Drop support for upgrades from very old versions that used lvm not lvm2.
  - Move libdevmapper-event plug-in libraries into new device-mapper subdirectory.
  - Don't verify lvm.conf contents when using rpm --verify.


author: Alasdair Kergon <agk@redhat.com> - 2.02.64-1
changelog:
  - Avoid pointless initialisation when the 'version' command is run directly.
  - Fix memory leak for invalid regex pattern input.
  - Display invalid regex pattern for filter configuration in case of error.
  - Fix -M and --type to use strings, not pointers that change on config refresh.
  - Fix lvconvert error message when existing mirrored LV is not found.
  - Set appropriate udev flags for reserved LVs.
  - Disallow the direct removal of a merging snapshot.
  - Don't preload the origin when removing a snapshot whose merge is pending.
  - Disallow the addition of mirror images while a conversion is happening.
  - Disallow primary mirror image removal when mirror is not in-sync.
  - Remove obsolete --name parameter from vgcfgrestore.
  - Add -S command to clvmd to restart the daemon preserving exclusive locks.
  - Increment lvm2app version from 1 to 2 (memory allocation changes).
  - Change lvm2app memory alloc/free for pv/vg/lv properties.
  - Change daemon lock filename from lvm2_monitor to lvm2-monitor for consistency.
  - Add support for new IMPORT{db} udev rule.
  - Add DM_UDEV_PRIMARY_SOURCE_FLAG udev flag to recognize proper DM events.
  - Also include udev libs in libdevmapper.pc.
  - Cache bitset locations to speed up _calc_states.
  - Add a regex optimisation pass for shared prefixes and suffixes.
  - Add dm_bit_and and dm_bitset_equal to libdevmapper.
  - Speed up dm_bit_get_next with ffs().


author: Alasdair Kergon <agk@redhat.com> - 2.02.65-1
changelog:
  - Disallow vgchange --clustered if there are active mirrors or snapshots.
  - Fix truncated total size displayed by pvscan.
  - Skip internal lvm devices in scan if ignore_suspended_devices is set.
  - Do not merge old device cache after we run full scan. (2.02.56)
  - Add new --sysinit compound option to vgchange and lvchange.
  - Fix clvmd init script never to deactivate non-clustered volume groups.
  - Drop duplicate errors for read failures and missing devices to verbose level.
  - Do not print encryption key in message debug output (cryptsetup luksResume).
  - Use -d to control level of messages sent to syslog by dmeventd.
  - Change -d to -f to run dmeventd in foreground.
  - Fix udev flags on remove in create_and_load error path.
  - Add dm_list_splice() function to join two lists together.
  - Use /bin/bash for scripts with bashisms.
  - Switch Libs.private to Requires.private in devmapper.pc and lvm2app.pc.
  - Use pkgconfig Requires.private for devmapper-event.pc.


author: Alasdair Kergon <agk@redhat.com> - 2.02.66-2
changelog:
  - Simplify and fix Requires package headers.
  - If unable to obtain snapshot percentage leave value blank on reports.
  - Use new install_system_dirs and install_initscripts makefile targets.
  - Add lvm2app functions to lookup a vgname from a pvid and pvname.
  - Change internal processing of PVs in pvchange.
  - Validate internal lock ordering of orphan and VG_GLOBAL locks.


author: Alasdair Kergon <agk@redhat.com> - 2.02.67-1
changelog:
  - Require partial option in lvchange --refresh for partial LVs.
  - Don't merge unchanged persistent cache file before dumping if tool scanned.
  - Avoid selecting names under /dev/block if there is an alternative.
  - Fix semctl parameter (union) to avoid misaligned parameter on some arches.
  - Fix clvmd initscript restart command to start clvmd if not yet running.
  - Handle failed restart of clvmd using -S switch properly.
  - Use built-in absolute paths in clvmd (clvmd restart and PV and LV queries).
  - Consistently return ECMD_FAILED if interrupted processing multiple LVs.
  - Add --type parameter description to the lvcreate man page.
  - Document 'clear' in dmsetup man page.
  - Replace strncmp kernel version number checks with proper ones.
  - Update clustered log kernel module name to log-userspace for 2.6.31 onwards.
  - Support autoloading of dm-mod module for kernels from 2.6.35.
  - Add dm_tree_node_set_presuspend_node() to presuspend child when deactivating.
  - Do not fail lvm_init() if init_logging() or _init_rand() generates an errno.
  - Fix incorrect memory pool deallocation while using vg_read for files.


author: Alasdair Kergon <agk@redhat.com> - 2.02.68-1
changelog:
  - Have device-mapper-libs require device-mapper (circular) for udev rules.
  - Clear exec_prefix.
  - Use early udev synchronisation and update of dev nodes for clustered mirrors.
  - Add lv_path to reports to offer full /dev pathname.
  - Avoid abort when generating cmirror status.
  - Fix clvmd initscript status to print only active clustered LVs.
  - Fix segfault in clvmd -R if no response from daemon received.
  - Honour log argument when down-converting stacked mirror.
  - Sleep to workaround clvmd -S race: socket closed early and server drops cmd.
  - Exit successfully when using -o help (but not -o +help) with LVM reports.
  - Add man pages for lvmconf, dmeventd and non-existent lvmsadc and lvmsar tools.
  - Add --force, --nofsck and --resizefs to lvresize/extend/reduce man pages.
  - Fix lvm2cmd example in documentation.
  - Fix typo in warning message about missing device with allocated data areas.
  - Add device name and offset to raw_read_mda_header error messages.
  - Allow use of lvm2app and lvm2cmd headers in C++ code.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.68-2
changelog:
  - Fix udev rules to handle spurious events properly.
  - Add Requires: udev >= 158-1 (needed for the change in udev rules).


author: Alasdair Kergon <agk@redhat.com> - 2.02.69-1
changelog:
  - Fix vgremove to allow removal of VG with missing PVs. (2.02.52)
  - Add metadata/vgmetadatacopies to lvm.conf.
  - Add --metadataignore to pvcreate and vgextend.
  - Add vg_mda_copies, pv_mda_used_count and vg_mda_used_count to reports.
  - Describe --vgmetadatacopies in lvm.conf and other man pages.
  - Add --[vg]metadatacopies to select number of mdas to use in a VG.
  - Make the metadata ignore bit control read/write metadata areas in a PV.
  - Add pvchange --metadataignore to set or clear a metadata ignore bit.
  - Refactor metadata code to prepare for --metadataignore / --vgmetadatacopies.
  - Ensure region_size of mirrored log does not exceed its full size.
  - Preload libc locale messages to prevent reading it in memory locked state.
  - Fix handling of simultaneous mirror image and mirrored log image failure.


author: Alasdair Kergon <agk@redhat.com> - 2.02.70-1
changelog:
  - Remove log directly if all mirror images of a mirrored log fail.
  - Randomly select which mdas to use or ignore.
  - Add printf format attributes to yes_no_prompt and fix a caller.
  - Always pass unsuspended dm devices through persistent filter to other filters.
  - Move test for suspended dm devices ahead of other filters.
  - Fix another segfault in clvmd -R if no response from daemon received. (2.02.68)
  - Remove superfluous suspended device counter from clvmd.
  - Fix lvm shell crash when input is entirely whitespace.
  - Update partial mode warning message.
  - Preserve memlock balance in clvmd when activation triggers a resume.
  - Restore the removemissing behaviour of lvconvert --repair --use-policies.


author: Alasdair Kergon <agk@redhat.com> - 2.02.71-1
changelog:
  - Make vgck warn about missing PVs.
  - Revert failed table load preparation after "create, load and resume".
  - Check if cluster log daemon is running before allowing cmirror create.
  - Add dm_create_lockfile to libdm and use for pidfiles for all daemons.
  - Correct LV list order used by lvconvert when splitting a mirror.
  - Check if LV with specified name already exists when splitting a mirror.
  - Fix suspend/resume logic for LVs resulting from splitting a mirror.
  - Fix possible hang when all mirror images of a mirrored log fail.
  - Adjust auto-metadata repair and caching logic to try to cope with empty mdas.
  - Update pvcreate, {pv|vg}change, and lvm.conf man pages about metadataignore.
  - Prompt if metadataignore with vgextend or pvchange would adjust vg_mda_copies.
  - Adjust vg_mda_copies if metadataignore given with vgextend or pvchange.
  - Speed up the regex matcher.
  - Use "nowatch" udev rule for inappropriate devices.
  - Document LVM fault handling in lvm_fault_handling.txt.
  - Clarify help text for vg_mda_count.
  - Add more verbose messages while checking volume_list and hosttags settings.
  - Add log_error when strdup fails in {vg|lv}_change_tag().
  - Do not log backtrace in valid _lv_resume() code path.


author: Alasdair Kergon <agk@redhat.com> - 2.02.72-3
changelog:
  - Address lvm2-cluster security flaw CVE-2010-2526.
      https://bugzilla.redhat.com/CVE-2010-2526
  - Change clvmd to communicate with lvm2 via a socket in /var/run/lvm.
  - Return controlled error if clvmd is run by non-root user.
  - Never use clvmd singlenode unless explicitly requested with -Isinglenode.
  - Fix exported_symbols generation to use standard compiler arguments.
  - Use #include <> not "" in lvm2app.h which gets installed on the system.
  - Make liblvm.device-mapper wait for include file generation.
  - Fix configure to supply DEFAULT_RUN_DIR to Makefiles.
  - Fix wrong number of mirror log at allocate policy


author: Alasdair Kergon <agk@redhat.com> - 2.02.73-1
changelog:
  - Change default alignment of data extents to 1MB.
  - Add --norestorefile option to pvcreate.
  - Require --restorefile when using pvcreate --uuid.
  - Fix potential for corruption during cluster mirror device failure.
  - Ignore snapshots when performing mirror recovery beneath an origin.
  - Monitor origin -real device below snapshot instead of overlay device.
  - Don't really change monitoring status when in test mode.
  - Fix some exit statuses when starting/stopping monitoring fails.
  - Enable snapshot monitoring by default when dmeventd is enabled.
  - Fix 'lvconvert --splitmirrors' in cluster operation.
  - Fix clvmd init script exit code to return 4 when executed as non-root user.
  - Recognise and give preference to md device partitions (blkext major).
  - Never scan internal LVM devices.
  - Don't ignore user-specified PVs in split-mirror operations. (2.02.71)
  - Fix data corruption bug in cluster mirrors.
  - Require logical volume(s) to be explicitly named for lvconvert --merge.
  - Avoid changing aligned pe_start as a side-effect of a log message.
  - Use built-in rule for device aliases: block/ < dm- < disk/ < mapper/ < other.
  - Handle failure of all mirrored log devices and all but one mirror leg. 
  - Disallow 'mirrored' log type for cluster mirrors.
  - Fix configure to supply DEFAULT_RUN_DIR to Makefiles.
  - Fix allocation of wrong number of mirror logs with 'remove' fault policy.
  - Add dmeventd/executable to lvm.conf to test alternative dmeventd.
  - Fix udev rules to support udev database content generated by older rules.
  - Reinstate detection of inappropriate uevent with DISK_RO set and suppress it.
  - Fix regex ttree off-by-one error.
  - Fix segfault in regex matcher with characters of ordinal value > 127.
  - Wait for node creation before displaying debug info in dmsetup.
  - Fix return status 0 for "dmsetup info -c -o help".


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.73-2
changelog:
  - Add configure --with-default-data-alignment.
  - Update heuristic used for default and detected data alignment.
  - Add "devices/default_data_alignment" to lvm.conf.


author: Alasdair Kergon <agk@redhat.com> - 2.02.74-1
changelog:
  - Fix the way regions are marked complete to avoid slow --nosync cmirror I/O.
  - Add DM_REPORT_FIELD_TYPE_ID_LEN to libdevmapper.h.
  - Allow : and @ to be escaped with \ in device names of PVs.
  - Avoid stack corruption when reading in large metadata.
  - Fix partial mode operations for lvm1 metadata format.
  - Track recursive filter iteration to avoid refreshing while in use. (2.02.56)
  - Allocate buffer for metadata tags dynamically to remove 4k limit.
  - Add random suffix to archive file names to prevent races when being created.
  - Reinitialize archive and backup handling on toolcontext refresh.
  - Make poll_mirror_progress report PROGRESS_CHECK_FAILED if LV is not a mirror.
  - Like mirrors, don't scan origins if ignore_suspended_devices() is set.
  - Automatically generate tailored LSB Requires-Start for clvmd init script.
  - Fix return code of pvmove --abort PV.
  - Fix pvmove --abort to remove even for empty pvmove LV.
  - Add implementation for simple numeric 'get' property functions.
  - Simplify MD/swap signature detection in pvcreate and allow aborting.
  - Allow --yes to be used without --force mode.
  - Fix file descriptor leak in swap signature detection error path.
  - Detect and allow abort in pvcreate if LUKS signature is detected.


author: Alasdair Kergon <agk@redhat.com> - 2.02.73-3
changelog:
  - Add --setuuid to dmsetup rename.
  - Add dm_task_set_newuuid to set uuid of mapped device post-creation.


author: Alasdair Kergon <agk@redhat.com> - 2.02.75-1
changelog:
  - Fix pthread mutex usage deadlock in clvmd.
  - Avoid segfault by limiting partial mode for lvm1 metadata. (2.02.74)
  - Skip dm devices in scan if they contain only error targets or are empty.
  - Don't take write lock in vgchange --refresh, --poll or --monitor.
  - Fix hang when repairing a mirrored-log that had both devs fail.
  - Speed up unquoting of quoted double quotes and backslashes.
  - Speed up CRC32 calculations by using a larger lookup table.
  - Implement dmeventd -R to restart without state loss.
  - Add --setuuid to dmsetup rename.
  - Add global/metadata_read_only to use unrepaired metadata in read-only cmds.
  - Automatically extend snapshots with dmeventd according to policy in lvm.conf.
  - Add activation/snapshot_autoextend_threshold/percent to lvm.conf.
  - Add devices/disable_after_error_count config to limit access to failing devs.
  - Implement vgextend --restoremissing to reinstate missing devs that return.
  - Read whole /proc/self/maps file before working with maps entries.
  - Convey need for snapshot-merge target in lvconvert error message and man page.
  - Give correct error message when creating a too-small snapshot.
  - Make lvconvert respect --yes and --force when converting an inactive log.
  - Better support of noninteractive shell execution of fsadm.
  - Fix usage of --yes flag for ReiserFS resize in fsadm.
  - Fix detection of mounted filesystems for fsadm when udev is used.
  - Fix assignment of default value to LVM variable in fsadm.
  - Fix support for --yes flag for fsadm.
  - Do not execute lvresize from fsadm --dry-run.
  - Fix fsadm return error code from user's break action.
  - Return const pointer from dm_basename() in libdevmapper.
  - Add dm_zalloc and use it and dm_pool_zalloc throughout.
  - Add dm_task_set_newuuid to set uuid of mapped device post-creation.
  - Fix missing variable initialization in cluster_send() function from cmirrord.
  - Fix pointer for VG name in _pv_resize_single error code path.
  - Fix vg_read memory leak with directory-based metadata.
  - Fix memory leak of config_tree in reinitialization code path.
  - Fix pool destruction order in dmeventd_lvm2_exit() to avoid leak debug mesg.
  - Remove dependency on libm by replacing floor() by an integer-based algorithm.
  - Refactor and add 'get' functions for pv, vg and lv properties/fields.
  - Add pv_get_property and create generic internal _get_property function.
  - Make generic GET_*_PROPERTY_FN macros with secondary macro for vg, pv & lv.


author: Alasdair Kergon <agk@redhat.com> - 2.02.76-1
changelog:
  - Clarify error messages when activation fails due to activation filter use.
  - Fix handling of online filesystem resize (using new fsadm return code).
  - Modify fsadm to return different status code for check of mounted filesystem.
  - Add DIAGNOSTICS section to fsadm man page.
  - Update VG metadata only once in vgchange when making multiple changes.
  - Allow independent vgchange arguments to be used together.
  - Fix vgchange to process -a, --refresh, --monitor and --poll like lvchange.
  - Add dmeventd -R to restart dmeventd without losing monitoring state. (1.02.56)
  - Automatically unmount invalidated snapshots in dmeventd.
  - Add lvm2app functions to query any pv, vg, or lv property / report field.
  - Fix a deadlock caused by double close in clvmd.
  - Fix NULL pointer dereference on too-large MDA error path in _vg_read_raw_area.
  - Fix regex optimiser not to ignore RHS of OR nodes in _find_leftmost_common.
  - Fix memory leak of field_id in _output_field function.
  - Allocate buffer for reporting functions dynamically to support long outputs.


author: Alasdair Kergon <agk@redhat.com> - 2.02.77-1
changelog:
  - Add PV and LV segment types and functions to liblvm.
  - Add set_property functions to liblvm.
  - Remove tag length restriction and allow / = ! : # & characters.
  - Support repetition of --addtag and --deltag arguments.
  - Add infrastructure for specific cmdline arguments to be repeated in groups.
  - Fix fsadm no longer to require '-f' to resize an unmounted filesystem.
  - Fix fsadm to detect mounted filesystems on older systems. (2.0.75)
  - Extend cling allocation policy to recognise PV tags (cling_by_tags).
  - Add allocation/cling_tag_list to lvm.conf.


author: Alasdair Kergon <agk@redhat.com> - 2.02.78-1
changelog:
  - Miscellaneous error path corrections and minor leaks fixed.
  - Avoid misleading PV missing warnings in vgextend --restoremissing.
  - Ignore unrecognised allocation policy found in metadata instead of aborting.
  - Disallow lvconvert ops that both allocate & free supplied PEs in a single cmd.
  - Fix liblvm seg_size to give bytes not sectors.
  - Add functions to look up LV/PV by name/uuid to liblvm.
  - Suppress 'No PV label' message when removing several PVs without mdas.
  - Fix default /etc/lvm permissions to be 0755. (2.02.66)


author: Alasdair Kergon <agk@redhat.com> - 2.02.79-1
changelog:
  - Create /var/run/lvm directory during clvmd initialisation if missing.
  - Avoid revalidating the label cache immediately after scanning.
  - Support scanning for a single VG in independent mdas.
  - Don't skip full scan when independent mdas are present even if memlock is set.
  - Add copy_percent and snap_percent to liblvm.
  - Add new dm_prepare_selinux_context fn to libdevmapper and use it throughout.
  - Enhance vg_validate to ensure integrity of LV and PV structs referenced.
  - Enhance vg_validate to check composition of pvmove LVs.
  - Avoid writing to freed memory in vg_release.  (2.02.78)
  - Add missing test for reallocation error in _find_parallel_space().
  - Add checks for allocation errors in config node cloning.
  - Fix error path if regex engine cannot be created in _build_matcher().
  - Check read() and close() results in _get_cmdline().
  - Fix NULL pointer check in error path in clvmd do_command(). (2.02.78)
  - Check for unlink failure in remove_lockfile() in dmeventd.
  - Use dm_free for dm_malloc-ed areas in _clog_ctr/_clog_dtr in cmirrord.
  - Change dm_regex_create() API to accept const char * const *patterns.


author: Alasdair Kergon <agk@redhat.com> - 2.02.81-1
changelog:
  - Add disk to allowed mirrored log type conversions.
  - Accept fusion fio in device type filter.
  - Speed up command processing by caching resolved config tree.
  - Use same dm cookie for consecutive dm ops in same VG to reduce udev waits.
  - Do not scan devices in dev_reset_error_count() when forking.
  - Skip unnecessary LOCK_NULL unlock call during volume deactivation.
  - Skip fs_unlock when calling exec_cmd within activation code (for modprobe).
  - Replace fs_unlock by sync_local_dev_names to notify local clvmd. (2.02.80)
  - Fix wrongly paired unlocking of VG_GLOBAL in pvchange. (2.02.66)
  - Return 0 from cmirrord initscript 'start' if daemon is already running.
  - Add DM_COOKIE_AUTO_CREATE to libdevmapper.h.
  - Improve general lvconvert man page description.
  - Detect NULL handle in get_property().
  - Fix memory leak in persistent filter creation error path.
  - Check for errors setting up dm_task struct in _setup_task().
  - Fail polldaemon creation when lvmcache_init() fails.
  - Return PERCENT_INVALID for errors in _copy_percent() and _snap_percent().
  - Detect errors from dm_task_set calls in _get_device_info (dmeventd).
  - Fix memory leak in debug mode of restart_clvmd() error path.
  - Log error message for pthread_join() failure in clvmd.
  - Use tmpfiles.d/lvm2.conf to create /var/lock/lvm and /var/run/lvm at boot.
  - Require initscripts for tmpfiles.d/lvm2.conf.


author: Alasdair Kergon <agk@redhat.com> - 2.02.82-2
changelog:
  - Bring lvscan man page up-to-date.
  - Fix lvchange --test to exit cleanly.
  - Add change_tag to toollib.
  - Allow multiple pvchange command line options to be specified together.
  - Do not fail pvmove polling if another process cleaned up first.
  - Avoid clvmd incrementing dlm lockspace reference count more than once.
  - Add -f (don't fork) option to clvmd and fix clvmd -d<num> description.


author: Alasdair Kergon <agk@redhat.com> - 2.02.83-1
changelog:
  - Allow exclusive activation of snapshots in a cluster.
  - Don't lose LV exclusive lock state when suspending clustered devices.
  - Fix fs operation stack handling when multiple operations on same device.
  - Increase hash table sizes to 1024 LV names and 64 PV uuids.
  - When setting up mda wipe first 4k of it as was intended.
  - Remove unneeded checks for open_count in lv_info().
  - Synchronize with udev before checking open_count in lv_info().
  - Add "dmsetup ls --tree" output to lvmdump.
  - Fix udev synchronization with no-locking --sysinit (2.02.80).
  - Improve man page style consistency for pvcreate, pvremove, pvresize, pvscan.
  - Avoid rebuilding of uuid validation table.
  - Improve lvcreate error text from insufficient "extents" to "free space".
  - Always use O_DIRECT when opening block devices to check for partitioning.
  - Move creation of device nodes from 'create' to 'resume'.
  - Add --addnodeonresume and --addnodeoncreate options to dmsetup.
  - Add dm_task_set_add_node to libdevmapper to control dev node creation time.
  - Add dm_task_secure_data to libdevmapper to wipe ioctl buffers in kernel.
  - Log debug message when expected uevent is not generated.
  - Set DM_UDEV_DISABLE_OTHER_RULES_FLAG for suspended DM devices in udev rules.
  - Begin a new pool object for each row in _output_as_rows() correctly.


author: Alasdair Kergon <agk@redhat.com> - 2.02.84-1
changelog:
  - Fix big-endian CRC32 checksumming broken since 2.02.75.  If affected,
    ensure metadata backups in /etc/lvm/backup are up-to-date (vgcfgbackup)
    then after updating to 2.02.84 restore metadata from them (using pvcreate
    with -Zn --restorefile and -u if PVs can no longer be seen, then
    vgcfgrestore -f).
  - Reinstate libdevmapper DEBUG_MEM support. (Removed in 1.02.62.)


author: Milan Broz <mbroz@redhat.com> - 2.02.84-2
changelog:
  - Accept kernel 3.0 uname string in libdevmapper initialization.
  - Make systemd initscripts configurable.


author: Alasdair Kergon <agk@redhat.com> - 2.02.86-1
changelog:
  - Fix activation sequences to avoid trapped I/O with multiple LVs.
  - Fix activation sequences to avoid allocating tables while devs suspended.
  - Remove unnecessary warning in pvcreate for MD linear devices.
  - Add activation/checks to lvm.conf to perform additional ioctl validation.
  - Append 'm' attribute to pv_attr for missing PVs.
  - Fix to preserve exclusive activation of mirror while up-converting.
  - Reject allocation if number of extents is not divisible by area count.
  - Fix cluster mirror creation to work with new mirror allocation algorithm.
  - Ignore activation/verify_udev_operations if dm kernel driver vsn < 4.18.
  - Add activation/verify_udev_operations to lvm.conf, disabled by default.
  - Ignore inconsistent pre-commit metadata on MISSING_PV devs while activating.
  - Add proper udev library context initialization and finalization to liblvm.
  - Downgrade critical_section errors to debug level until it is moved to libdm.
  - Fix ignored background polling default in vgchange -ay.
  - Fix reduction of mirrors with striped segments to always align to stripe size.
  - Validate mirror segments size.
  - Fix extent rounding for striped volumes never to reduce more than requested.
  - Fix create_temp_name to replace any '/' found in the hostname with '?'.
  - Always use append to file in lvmdump. selinux policy may ban file truncation.
  - Propagate test mode to clvmd to skip activation and changes to held locks.
  - Permit --available with lvcreate so non-snapshot LVs need not be activated.
  - Clarify error message when unable to convert an LV into a snapshot of an LV.
  - Do not issue an error message when unable to remove .cache on read-only fs.
  - Avoid memlock size mismatch by preallocating stdio line buffers.
  - Report internal error if suspending a device using an already-suspended dev.
  - Report internal error if any table is loaded while any dev is known suspended.
  - Report error if a table load requiring target parameters has none supplied.
  - Add dmsetup --checks and dm_task_enable_checks framework to validate ioctls.
  - Add age_in_minutes parameter to dmsetup udevcomplete_all.
  - Disable udev fallback by default and add --verifyudev option to dmsetup.
  - Add dm_get_suspended_counter() for number of devs in suspended state by lib.
  - Fix "all" report field prefix matching to include label fields with pv_all.
  - Delay resuming new preloaded mirror devices with core logs in deptree code.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.86-2
changelog:
  - Add dm-event and lvm2-monitor unit files for use with systemd.
  - Add sysvinit subpackage for legacy SysV init script support.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.86-4
changelog:
  - Add support for systemd file descriptor handover to dmeventd.
  - Add support for new oom killer adjustment interface (oom_score_adj).


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.87-1
changelog:
  - Cache and share generated VG structs to improve performance.
  - Suppress locking error messages in monitoring init scripts.
  - Add global/detect_internal_vg_cache_corruption to lvm.conf.
  - If pipe in clvmd fails return busy instead of using uninitialised descriptors.
  - Initialise clvmd locks before lvm context to avoid open descriptor leaks.
  - Suppress low-level locking errors and warnings while using --sysinit.
  - Add test for fcntl error in singlenode client code.
  - Compare file size (as well as timestamp) to detect changed config file.
  - Change DEFAULT_UDEV_SYNC to 1 so udev_sync is used if there is no config file.
  - Update udev rules to skip DM flags decoding for removed devices.
  - Remove device name prefix from dmsetup line output if -j & -m or -u supplied.
  - Add new segtype 'raid' for MD RAID 1/4/5/6 support with dmeventd plugin.
  - Add ability to reduce the number of mirrors in raid1 arrays to lvconvert.
  - Add support for systemd file descriptor handover in dmeventd.
  - Add systemd unit file to provide lvm2 monitoring.
  - Add systemd unit files for dmeventd.
  - Use new oom killer adjustment interface (oom_score_adj) when available.
  - Fix read-only identical table reload supression.
  - Remove --force option from lvrename manpage.


author: Alasdair Kergon <agk@redhat.com> - 2.02.88-1
changelog:
  - Remove incorrect 'Breaking' error message from allocation code. (2.02.87)
  - Add lvconvert --merge support for raid1 devices split with --trackchanges.
  - Add --trackchanges support to lvconvert --splitmirrors option for raid1.
  - Add dm_tree_node_add_null_area for temporarily-missing raid devs tracked.
  - Support lvconvert of -m1 raid1 devices to a higher number.
  - Support splitting off a single raid1 rimage in lvconvert --splitmirrors.
  - Add -V as short form of --virtualsize in lvcreate.


author: Alasdair Kergon <agk@redhat.com> - 2.02.89-2
changelog:
  - New upstream release with experimental support for thinly-provisioned devices.
  - The changelog for this release is quite long and contained in 
    WHATS_NEW and WHATS_NEW_DM in the documentation directory.


author: Alasdair Kergon <agk@redhat.com> - 2.02.90-1
changelog:
  - Drop support for cman, openais and cmirror for f17. Require dlm not cluster.
  - Automatically detect whether corosync clvmd needs to use confdb or cmap.
  - Disable partial activation for thin LVs and LVs with all missing segments.
  - sync_local_dev_names before (re)activating mirror log for initialisation.
  - Do not print warning for pv_min_size between 512KB and 2MB.
  - Clean up systemd unit ordering and requirements.
  - Allow ALLOC_NORMAL to track reserved extents for log and data on same PV.
  - Fix data% report for thin volume used as origin for non-thin snapshot.


author: Alasdair Kergon <agk@redhat.com> - 2.02.92-1
changelog:
  - Read dmeventd monitoring config settings for every lvm command.
  - For thin devices, initialize monitoring only for thin pools not thin volumes.
  - Make conversion from a synced 'mirror' to 'raid1' not cause a full resync.
  - Add clvmd init dependency on dlm service when running with new corosync.
  - Switch to using built-in blkid in 13-dm-disk.rules.
  - Add "watch" rule to 13-dm-disk.rules.
  - Detect failing fifo and skip 20s retry communication period.
  - Replace any '\' char with '\\' in dm table specification on input.
  - New 'mangle' options in dmsetup/libdevmapper for transparent reversible 
    encoding of characters that udev forbids in device names.
  - Add --manglename option to dmsetup to select the name mangling mode.
  - Add mangle command to dmsetup to provide renaming to correct mangled form.
  - Add 'mangled_name' and 'unmangled_name' fields to dmsetup info -c -o.
  - Mangle device name on dm_task_set_name/newname call if necessary.
  - Add dm_task_get_name_mangled/unmangled to libdevmapper.
  - Add dm_set/get_name_mangling_mode to set/get name mangling in libdevmapper.


author: Alasdair Kergon <agk@redhat.com> - 2.02.93-1
changelog:
  - Moved systemd tmpfiles installation upstream for lvm2 lock and run dirs.
  - Require number of stripes to be greater than parity devices in higher RAID.
  - Fix allocation code to allow replacement of single RAID 4/5/6 device.
  - Check all tags and LV names are in a valid form before writing any metadata.
  - Allow 'lvconvert --repair' to operate on RAID 4/5/6.
  - Fix build_parallel_areas_from_lv to account correctly for raid parity devices.
  - Print message when faulty raid devices have been replaced.


author: Alasdair Kergon <agk@redhat.com> - 2.02.94-1
changelog:
  - Add support to execute thin_check with each de/active of thin pool.
  - Fix automatic estimation of metadata device size for thin pool.
  - Wipe initial 4KiB of non zeroed thin volumes.
  - Update code-base to incorporate new metadata daemon. (Not used in Fedora yet.)
  - Numerous minor cleanups across the code-base.
  - Fix dmsetup / dm_task_set_name to properly resolve path to dm name. (2.02.93)


author: Alasdair Kergon <agk@redhat.com> - 2.02.95-1
changelog:
  - If unspecified, adjust thin pool metadata and chunk size to fit into 128MB.
  - Deactivation of failed thin check on thin pool returns success.
  - Check for multiply-mangled names in auto mangling mode.
  - Fix dm_task_get_name_unmangled to not unmangle already unmangled name.
  - Check whether device names are properly mangled on ioctl return.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.95-3
changelog:
  - Rebuild against new corosync (soname change).
  - BuildRequires and Requires on newer version of corosync.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-4
changelog:
  - Reinstate cmirror support.
  - Detect lvm binary path in lvmetad udev rules.
  - Use pvscan --cache instead of vgscan in systemd units/init scripts.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-7
changelog:
  - Use BuildRequires: systemd-devel instead of BuildRequires: libudev-devel.
  - Remove unsupported udev_get_dev_path libudev call used for checking udev dir.


author: Kay Sievers - 2.02.95-8
changelog:
  - Remove explicit Requires: libudev, rpm takes care of that:
      $ rpm -q --requires device-mapper | grep udev
      libudev.so...


author: Alasdair Kergon <agk@redhat.com> - 2.02.96-1
changelog:
  - Require device-mapper-persistent-data package for thin provisioning.
  - Set delay_resume_if_new on deptree snapshot origin.
  - Log value chosen in _find_config_bool like other variable types do.
  - Wait for dmeventd to exit after sending it DM_EVENT_CMD_DIE when restarting.
  - Append 'Used' to {Blk}DevNames/DevNos dmsetup report headers for clarity.
  - Remove dmeventd fifos on exit if they are not managed by systemd.
  - Use SD_ACTIVATION environment variable in systemd units to detect systemd.
  - Only start a new dmeventd instance on restart if one was already running.
  - Extend the time waited for input from dmeventd fifo to 5 secs. (1.02.73)
  - Fix error paths for regex filter initialization.
  - Re-enable partial activation of non-thin LVs until it can be fixed. (2.02.90)
  - Fix alloc cling to cling to PVs already found with contiguous policy.
  - Fix cling policy not to behave like normal policy if no previous LV seg.
  - Fix allocation loop not to use later policies when --alloc cling without tags.
  - Fix division by zero if PV with zero PE count is used during vgcfgrestore.
  - Add initial support for thin pool lvconvert.
  - Fix lvrename for thin volumes (regression in for_each_sub_lv). (2.02.89)
  - Fix up-convert when mirror activation is controlled by volume_list and tags.
  - Warn of deadlock risk when using snapshots of mirror segment type.
  - Fix bug in cmirror that caused incorrect status info to print on some nodes.
  - Remove statement that snapshots cannot be tagged from lvm man page.
  - Disallow changing cluster attribute of VG while RAID LVs are active.
  - Fix lvconvert error message for non-mergeable volumes.
  - Allow subset of failed devices to be replaced in RAID LVs.
  - Prevent resume from creating error devices that already exist from suspend.
  - Update and correct lvs man page with supported column names.
  - Handle replacement of an active device that goes missing with an error device.
  - Change change raid1 segtype always to request a flush when suspending.
  - Add udev info and context to lvmdump.
  - Add lvmetad man page.
  - Fix RAID device replacement code so that it works under snapshot.
  - Fix inability to split RAID1 image while specifying a particular PV.
  - Update man pages to give them all the same look&feel.
  - Fix lvresize of thin pool for striped devices.
  - For lvresize round upward when specifying number of extents.
  - For lvcreate with %FREE support rounding downward stripe alignment.
  - Change message severity to log_very_verbose for missing dev info in udev db.
  - Fix lvconvert when specifying removal of a RAID device other than last one.
  - Fix ability to handle failures in mirrored log in dmeventd plugin. (2.02.89)
  - Fix unlocking volume group in vgreduce in error path.
  - Cope when VG name is part of the supplied name in lvconvert --splitmirrors -n.
  - Fix exclusive lvchange running from other node. (2.02.89)
  - Add 'vgscan --cache' functionality for consistency with 'pvscan --cache'.
  - Keep exclusive activation in pvmove if LV is already active.
  - Disallow exclusive pvmove if some affected LVs are not exclusively activated.
  - Remove unused and wrongly set cluster VG flag from clvmd lock query command.
  - Fix pvmove for exclusively activated LV pvmove in clustered VG. (2.02.86)
  - Update and fix monitoring of thin pool devices.
  - Check hash insert success in lock_vg in clvmd.
  - Check for buffer overwrite in get_cluster_type() in clvmd.
  - Fix global/detect_internal_vg_cache_corruption config check.
  - Fix initializiation of thin monitoring. (2.02.92)
  - Cope with improperly formatted device numbers in /proc/devices. (2.02.91)
  - Exit if LISTEN_PID environment variable incorrect in lvmetad systemd handover.
  - Fix fsadm propagation of -e option.
  - Fix fsadm parsing of /proc/mounts files (don't check for substrings).
  - Fix fsadm usage of arguments with space.
  - Fix arg_int_value alongside ARG_GROUPABLE --major/--minor for lvcreate/change.
  - Fix name conflicts that prevent down-converting RAID1 when specifying a device
  - Improve thin_check option passing and use configured path.
  - Add --with-thin-check configure option for path to thin_check.
  - Fix error message when pvmove LV activation fails with name already in use.
  - Better structure layout for device_info in dev_subsystem_name().
  - Change message severity for creation of VG over uninitialised devices.
  - Fix error path for failed toolcontext creation.
  - Don't unlink socket on lvmetad shutdown if instantiated from systemd.
  - Restart lvmetad automatically from systemd if it exits from uncaught signal.
  - Fix warn msg for thin pool chunk size and update man for chunksize. (2.02.89)


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.96-2
changelog:
  - Compile with lvmetad support enabled.
  - Add support for volume autoactivation using lvmetad.
  - Update man pages with --activate ay option and auto_activation_volume_list.
  - Use vgchange -aay instead of vgchange -ay in clmvd init script.
  - Add activation/auto_activation_volume_list to lvm.conf.
  - Add --activate ay to lvcreate, lvchange, pvscan and vgchange.
  - Add --activate synonym for --available arg and prefer --activate.
  - Open device read-only to obtain readahead value.
  - Add configure --enable-udev-rule-exec-detection to detect exec path in rules.
  - Use sbindir in udev rules by default and remove executable path detection.
  - Remove hard-coded paths for dmeventd fifos and use default-dm-run-dir.
  - Add configure --with-lvmetad-pidfile to remove hard-coded value.
  - Add configure --with-default-pid-dir for common directory with pid files.
  - Add configure --with-default-dm-run-dir to set run directory for dm tools.
  - Add documentation references in systemd units.
  - Clean up spec file and keep support only for Fedora 17 upwards.


author: Alasdair Kergon <agk@redhat.com> - 2.02.97-1
changelog:
  - Improve documention of allocation policies in lvm.8.
  - Increase limit for major:minor to 4095:1048575 when using -My option.
  - Add generator for lvm2 activation systemd units.
  - Add lvm_config_find_bool lvm2app fn to retrieve bool value from config tree.
  - Respect --test when using lvmetad.
  - No longer capitalise first LV attribute char for invalid snapshots.
  - Allow vgextend to add PVs to a VG that is missing PVs.
  - Recognise Micron PCIe SSDs in filter and move array out to device-types.h.
  - Fix dumpconfig <node> to print only <node> without its siblings. (2.02.89)
  - Do not issue "Failed to handle a client connection" error if lvmetad killed.
  - Support lvchange --discards and -Z with thin pools.
  - Add discard LV segment field to reports.
  - Add --discards to lvcreate --thin.
  - Set discard and external snapshot features if thin pool target is vsn 1.1+.
  - Count percentage of completeness upwards not downwards when merging snapshot.
  - Skip activation when using vg/lvchange --sysinit -a ay and lvmetad is active.
  - Fix extending RAID 4/5/6 logical volumes
  - Fix test for PV with unknown VG in process_each_pv to ignore ignored mdas.
  - Fix _alloc_parallel_area to avoid picking already-full areas for raid devices.
  - Never issue discards when LV extents are being reconfigured, not deleted.
  - Allow release_lv_segment_area to fail as functions it calls can fail.
  - Fix missing sync of filesystem when creating thin volume snapshot.
  - Allow --noflush with dmsetup status and wait (for thin target).
  - Add dm_config_write_one_node to libdevmapper.
  - Add dm_vasprintf to libdevmapper.
  - Support thin pool message release/reserve_metadata_snap in libdevmapper.
  - Support thin pool discards and external origin features in libdevmapper.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-1
changelog:
  - Don't use lvmetad in lvm2-monitor.service ExecStop to avoid a systemd issue.
  - Depend on lvm2-lvmetad.socket in lvm2-monitor.service systemd unit.
  - Init lvmetad lazily to avoid early socket access on config overrides.
  - Hardcode use_lvmetad=0 if cluster locking used and issue a warning msg.
  - Fix dm_task_set_cookie to properly process udev flags if udev_sync disabled.
  - Don't try to issue discards to a missing PV to avoid segfault.
  - Fix vgchange -aay not to activate non-matching LVs that follow a matching LV.
  - Fix lvchange --resync for RAID LVs which had no effect.
  - Add RAID10 support (--type raid10).
  - Introduce blkdeactivate script to deactivate block devs with dependencies.
  - Apply 'dmsetup mangle' for dm UUIDs besides dm names.
  - Use -q as short form of --quiet.
  - Suppress non-essential stdout with -qq.
  - Add log/silent to lvm.conf equivalent to -qq.
  - Add (p)artial attribute to lvs.
  - Implement devices/global_filter to hide devices from lvmetad.
  - Add lvmdump -l, to collect a state dump from lvmetad.
  - Add --discards to lvconvert.
  - Add support for lvcreate --discards.
  - Add --poolmetadata to lvconvert and support thin meta/data dev stacking.
  - Support creation of read-only thin volumes (lvcreate -p r).
  - Support changes of permissions for thin snapshot volumes.
  - Make lvremove ask before discarding data areas.
  - Prohibit not yet supported change of thin-pool to read-only.
  - Using autoextend percent 0 for thin pool fails 'lvextend --use-policies'.
  - Make vgscan --cache an alias for pvscan --cache.
  - Clear lvmetad metadata/PV cache before a rescan.
  - Fix a segmentation fault upon receiving a corrupt lvmetad response.
  - Give inconsistent metadata warnings in pvscan --cache.
  - Avoid overlapping locks that could cause a deadlock in lvmetad.
  - Fix memory leaks in libdaemon and lvmetad.
  - Optimize libdaemon logging for a fast no-output path.
  - Only create lvmetad pidfile when running as a daemon (no -f).
  - Warn if lvmetad is running but disabled.
  - Warn about running lvmetad with use_lvmetad = 0 in example.conf.
  - Update lvmetad help output (flags and their meaning).
  - Make pvscan --cache read metadata from LVM1 PVs.
  - Make libdaemon buffer handling asymptotically more efficient.
  - Make --sysinit suppress lvmetad connection failure warnings.
  - Prohibit usage of lvcreate --thinpool with --mirrors.
  - Fix lvm2api origin reporting for thin snapshot volume.
  - Add implementation of lvm2api function lvm_percent_to_float.
  - Allow non power of 2 thin chunk sizes if thin pool driver supports that.
  - Allow limited metadata changes when PVs are missing via [vg|lv]change.
  - Do not start dmeventd for lvchange --resync when monitoring is off.
  - Remove pvscan --cache from lvm2-lvmetad init script.
  - Remove ExecStartPost with pvscan --cache from lvm2-lvmetad.service.
  - Report invalid percentage for property snap_percent of non-snaphot LVs.
  - Disallow conversion of thin LVs to mirrors.
  - Fix lvm2api data_percent reporting for thin volumes.
  - Do not allow RAID LVs in a clustered volume group.
  - Enhance insert_layer_for_lv() with recursive rename for _tdata LVs.
  - Skip building dm tree for thin pool when called with origin_only flag.
  - Ensure descriptors 0,1,2 are always available, using /dev/null if necessary.
  - Use /proc/self/fd when available for closing opened descriptors efficiently.
  - Fix inability to create, extend or convert to a large (> 1TiB) RAID LV.
  - Update lvmetad communications to cope with clients using different filters.
  - Clear LV_NOSYNCED flag when a RAID1 LV is converted to a linear LV.
  - Disallow RAID1 upconvert if the LV was created with --nosync.
  - Depend on systemd-udev-settle in units generated by activation generator.
  - Disallow addition of RAID images until the array is in-sync.
  - Fix RAID LV creation with '--test' so valid commands do not fail.
  - Add lvm_lv_rename() to lvm2api.
  - Fix setvbuf code by closing and reopening stream before changing buffer.
  - Disable private buffering when using liblvm.
  - When private stdin/stdout buffering is not used always use silent mode.
  - Fix 32-bit device size arithmetic needing 64-bit casting throughout tree.
  - Fix dereference of NULL in lvmetad error path logging.
  - Fix buffer memory leak in lvmetad logging.
  - Correct the discards field in the lvs manpage (2.02.97).
  - Use proper condition to check for discards settings unsupported by kernel.
  - Reinstate correct default to ignore discards for thin metadata from old tools.
  - Issue error message when -i and -m args do not match specified RAID type.
  - Change lvmetad logging syntax from -ddd to -l {all|wire|debug}.
  - Add new libdaemon logging infrastructure.
  - Support unmount of thin volumes from pool above thin pool threshold.
  - Update man page to reflect that dm UUIDs are being mangled as well.
  - Add 'mangled_uuid' and 'unmangled_uuid' fields to dmsetup info -c -o.
  - Mangle device UUID on dm_task_set_uuid/newuuid call if necessary.
  - Add dm_task_get_uuid_mangled/unmangled to libdevmapper.
  - Always reset delay_resume_if_new flag when stacking thin pool over anything.
  - Don't create value for dm_config_node and require dm_config_create_value call.
  - Check for existing new_name for dmsetup rename.
  - Fix memory leak in dmsetup _get_split_name() error path.
  - Clean up spec file and keep support only for Fedora 18 upwards.
  - Use systemd macros in rpm scriptlets to set up systemd units.
  - Add Requires: bash >= 4.0 for blkdeactivate script.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-3
changelog:
  - Incorporate former python-lvm package in lvm2 as lvm2-python-libs subpackage.
  - Do not use lvmetad by default if lvm.conf missing or use_lvmetad not defined.
  - Exit pvscan --cache immediately if cluster locking used or lvmetad not used.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-5
changelog:
  - Add lvm2-activation-generator systemd generator to automatically generate
    systemd units to activate LVM2 volumes even if lvmetad is not used.
    This replaces lvm activation part of the former fedora-storage-init
    script that was included in the initscripts package before.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-6
changelog:
  - Add pidfile reference to clvmd and cmirrord initscript for systemd
    to not assume RemainAfterExit=yes which would end up with inconsistent
    state for these services if daemon is killed.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.99-1
changelog:
  - o Features/Extensions/Additions:
  - Add initial support thin pool lvconvert --repair.
  - Add support for poolmetadataspare LV, that will be used for pool recovery.
  - Improve activation order when creating thin pools in non-clustered VG.
  - Add lvm2-activation-net systemd unit to activate LVs on net-attached storage.
  - Automatically flag thin snapshots to be skipped during activation.
  - Add support for persistent flagging of LVs to be skipped during activation.
  - Make selected thinp settings customizable by a profile.
  - Support storing profile name in metadata for both VGs and LVs.
  - Add support for configuration profiles.
  - Add support for thin volumes in vgsplit.
  - Add lvresize support for online thin pool metadata volume resize.
  - Add detection for thin pool metadata resize kernel support.
  - Add vg->vg_ondisk / lv_ondisk() holding committed metadata.
  - Add detection of mounted fs also for vgchange deactivation.
  - Avoid a global lock in pvs when lvmetad is in use.
  - Detect maximum usable size for snapshot for lvresize.
  - Improve RAID kernel status retrieval to include sync_action/mismatch_cnt.
  - Add external origin support for lvcreate.
  - Support automatic config validation.
  - Add PV header extension: extension version, flags and bootloader areas.
  - Initial support for lvconvert of thin external origin.
  - Improve activation code for better support of stacked devices.
  - vgimport '--force' now allows import of VGs with missing PVs.
  - Allow removal or replacement of RAID LV components that are error segments.
  - Make 'vgreduce --removemissing' able to handle RAID LVs with missing PVs.
  - Add lvconvert support to swap thin pool metadata volume.
  - Allow vgcfgrestore of lvm2 metadata with thin volumes if --force is used.
  - Give precedence to EMC power2 devices with duplicate PVIDs.
  - Recognise Storage Class Memory (IBM S/390) devices in filter.
  - Recognise STEC skd devices in filter.
  - Recognise Violin Memory vtms devices in filter.
  - Support discards for non-power-of-2 thin pool chunks.
  - Automatically restore MISSING PVs with no MDAs.
  - Support allocation of pool metadata with lvconvert command.
  - Detect mounted fs also via reading /proc/self/mountinfo.
  - o Command Interface/Options:
  - Support ARG_GROUPABLE with merge_synonym (for --raidwritemostly).
  - Add --ignoreactivationskip to lvcreate/vgchange/lvchange to ignore skip flag.
  - Add --setactivationskip to lvcreate/lvchange to set activation skip flag.
  - Add --type profilable to lvm dumpconfig to show profilable config settings.
  - Add --mergedconfig to lvm dumpconfig for merged --config/--profile/lvm.conf.
  - Support changing VG/LV profiles: vgchange/lvchange --profile/--detachprofile.
  - Add new --profile command line arg to select a configuration profile for use.
  - For creation of snapshot require size for at least 3 chunks.
  - Do not accept size parameters bigger then 16EiB.
  - Accept --yes in all commands so test scripts can be simpler.
  - Add lvcreate/lvchange --[raid]{min|max}recoveryrate for raid LVs.
  - Add lvchange --[raid]writemostly/writebehind support for RAID1
  - Add lvchange --[raid]syncaction for scrubbing of RAID LVs.
  - Add --validate option to lvm dumpconfig to validate current config on demand.
  - Add --ignoreadvanced and --ignoreunsupported switch to lvm dumpconfig.
  - Add --withcomments and --withversions switch to lvm dumpconfig.
  - Add --type {current|default|missing|new} and --atversion to lvm dumpconfig.
  - Add --bootloaderareasize to pvcreate and vgconvert to create bootloader area.
  - Do not take a free lv name argument for lvconvert --thinpool option.
  - Allow lvconvert --stripes/stripesize only with --mirrors/--repair/--thinpool.
  - Do not ignore -f in lvconvert --repair -y -f for mirror and raid volumes.
  - Support use of option --yes for lvchange --persistent.
  - Fix clvmd support for option -d and properly use its argument.
  - o Reporting:
  - Issue an error msg if lvconvert --type used incorrectly with other options.
  - Use LOG_DEBUG/ERR msg severity instead default for lvm2-activation-generator.
  - Add LV report fields: raid_mismatch_count/raid_sync_action/raid_write_behind.
  - Add LV reporting fields raid_min_recovery_rate, raid_max_recovery_rate.
  - Add sync_percent as alias for copy_percent LV reporting field.
  - Add lv_ prefix to modules reporting field.
  - Use units B or b (never E) with no decimal places when displaying sizes < 1k.
  - List thin-pool and thin modules for thin volumes.
  - Add 's(k)ip activation' bit to lvs -o lv_attr to indicate skip flag attached.
  - Improve error loging when user tries to interrupt commands.
  - Add vgs/lvs -o vg_profile/lv_profile to report profiles attached to VG/LV.
  - Report lvs volume type 'e' with higher priority.
  - Report lvs volume type 'o' also for external origin volumes.
  - Report lvs target type 't' only for thin pools and thin volumes.
  - Add "active" LV reporting field to show activation state.
  - Add "monitor" segment reporting field to show dmevent monitoring status.
  - Add explicit message about unsupported pvmove for thin/thinpool volumes.
  - Add pvs -o pv_ba_start,pv_ba_size to report bootloader area start and size.
  - Fix pvs -o pv_free reporting for PVs with zero PE count.
  - Report blank origin_size field if the LV doesn't have an origin instead of 0.
  - Report partial and in-sync RAID attribute based on kernel status
  - Log output also to syslog when abort_on_internal_error is set.
  - Change lvs heading Copy% to Cpy%Sync and print RAID4/5/6 sync% there too.
  - Report error for nonexisting devices in dmeventd communication.
  - Reduce some log_error messages to log_warn where we don't fail.
  - o Configuration:
  - Add lvm.conf thin_repair/dump_executable and thin_repair_options.
  - Add activation/auto_set_activation_skip to control activation skip flagging.
  - Add default.profile configuration profile and install it on make install.
  - Add config/profile_dir to set working directory to load profiles from.
  - Use mirror_segtype_default if type not specified for linear->mirror upconvert.
  - Refine lvm.conf and man page documentation for autoactivation feature.
  - Override system's global_filter settings for vgimportclone.
  - Find newest timestamp of merged config files.
  - Add 'config' section to lvm.conf to set the way the LVM configuration is handled.
  - Add global/raid10_segtype_default to lvm.conf.
  - Accept activation/raid_region_size in preference to mirror_region_size config.
  - Add log/debug_classes to lvm.conf to control debug log messages.
  - Allow empty activation/{auto_activation|read_only|}_volume_list config option.
  - Add lvm.conf option global/thin_disabled_features.
  - Add lvm.conf thin pool allocation settings thin_pool_{chunk_size|discards|zero}.
  - Relax ignore_suspended_devices to read from mirrors that don't have a device marked failed.
  - o Documentation:
  - Add man page entries for profile configuration and related options.
  - Document lvextend --use-policies option in man.
  - Improve lvcreate, lvconvert and lvm man pages.
  - o API/interfaces:
  - liblvm/python API: Additions: PV create/removal/resize/listing
  - liblvm/python API: Additions: LV attr/origin/Thin pool/Thin LV creation
  - Fix exported symbols regex for non-GNU busybox sed.
  - Add LV snapshot support to liblvm and python-lvm.
  - Fix lvm2app to return all property sizes in bytes (not sectors).
  - Fix lvm2app and return lvseg discards property as string.
  - Remove python liblvm object. systemdir can only be changed using env var now.
  - Add DM_DISABLE_UDEV environment variable to manage dev nodes by libdm only.
  - Add dm_get_status_snapshot() for parsing snapshot status.
  - Append discards and read-only fields to exported struct dm_status_thin_pool.
  - Validate passed params to dm_get_status_raid/thin/thin_pool().
  - Fix dm_task_set_cookie to properly process udev flags if udev_sync disabled.
  - Add dm_mountinfo_read() for parsing /proc/self/mountinfo.
  - Add dm_config_write_{node_out/one_node_out} for enhanced config output.
  - Add dm_config_value_is_bool to check for boolean value in supported formats.
  - Add DM_ARRAY_SIZE public macro.
  - Add DM_TO_STRING public macro.
  - Implement ref-counting for parents in python lib.
  - o Fixes (general)
  - Do not zero init 4KB of thin snapshot for non-zeroing thin pool (2.02.94).
  - Correct thin creation error paths.
  - Add whole log_lv and metadata_lv sub volumes when creating partial tree.
  - Properly use snapshot layer for origin which is also thin volume.
  - Avoid generating metadata backup when calling update_pool_lv().
  - Send thin messages also for active thin pool and inactive thin volume.
  - Avoid creation of multiple archives for one command.
  - Avoid flushing thin pool when just requesting transaction_id.
  - Fix use of too big chunks of memory when communication with lvmetad.
  - Also filter partitions on mpath components if multipath_component_detection=1.
  - Do not use persistent filter with lvmetad.
  - Move syslog code out of signal handle in dmeventd.
  - Fix lvresize --use-policies of VALID but 100% full snapshot.
  - Skip monitoring of snapshots that are already bigger then origin.
  - Refuse to init a snapshot merge in lvconvert if there's no kernel support.
  - Fix alignment of PV data area if detected alignment less than 1 MB (2.02.74).
  - Fix premature DM version checking which caused useless mapper/control access.
  - Fix creation and removal of clustered snapshot.
  - Fix clvmd caching of metadata when suspending inactive volumes.
  - Fix lvmetad error path in lvmetad_vg_lookup() for null vgname.
  - Fix clvmd _cluster_request() return code in memory fail path.
  - Fix vgextend to not allow a PV with 0 MDAs to be used while already in a VG.
  - Fix PV alignment to incorporate alignment offset if the PV has zero MDAs.
  - Fix missing cleanup of flags when the LV is detached from pool.
  - Fix check for some forbidden discards conversion of thin pools.
  - Fix blkdeactivate to handle nested mountpoints and mangled mount paths.
  - Synchronize with udev in pvscan --cache and fix dangling udev_sync cookies.
  - Fix autoactivation to not autoactivate VG/LV on each change of the PVs used.
  - Limit RAID device replacement to repair only if LV is not in-sync.
  - Disallow RAID device replacement or repair on inactive LVs.
  - Unlock vg mutex in error path when lvmetad tries to lock_vg.
  - Detect key string duplication failure in config_make_nodes_v in libdaemon.
  - Disallow pvmove on RAID LVs until they are addressed properly
  - Recognize DM_DISABLE_UDEV environment variable for a complete fallback.
  - Do not verify udev operations if --noudevsync command option is used.
  - When no --stripes argument is given when creating a RAID10 volume, default to 2 stripes.
  - Do not allow lvconvert --splitmirrors on RAID10 logical volumes.
  - Skip mlocking [vectors] on arm architecture.
  - Repair a mirrored log before the mirror itself when both fail.
  - Don't use lvmetad in lvm2-monitor.service ExecStop to avoid a systemd issue.
  - Avoid trying to read a mirror that has a failed device in its mirrored log.
  - Fix 'dmsetup splitname -o' to not fail if used without '-c' switch (1.02.68).
  - Fix segfault for truncated string token in config file after the first '"'.
  - Fix config node lookup inside empty sections to not return the section itself.
  - Fix parsing of 64bit snapshot status in dmeventd snapshot plugin.
  - Always return success on dmeventd -V command call.
  - o Fixes (segfaults/crashes/deadlocks/races):
  - Fix segfault if devices/global_filter is not specified correctly.
  - Fix segfault when reporting raid_syncaction for older kernels.
  - Fix vgcfgrestore crash when specified incorrect vg name.
  - Avoid crash-inducing race in lvmetad when VG disappears during rename.
  - Fix possible race while removing metadata from lvmetad.
  - Fix possible deadlock when querying and updating lvmetad at the same time.
  - Check for memory failure of dm_config_write_node() in lvmetad.
  - Fix crash in pvscan --cache -aay triggered by non-mda PV.
  - Prevent double free error after dmeventd call of _fill_device_data().
  - o Fixes (resource leaks/memleaks):
  - Release memory allocated with _cached_info().
  - Release memory and unblock signals in lock_vol error path.
  - Fix memory resource leak in memlocking error path.
  - Fix memleak in dmeventd thin plugin in device list obtaining err path.
  - Fix socket leak on error path in lvmetad's handle_connect.
  - Fix memleak on error path for lvmetad's pv_found.
  - Fix memleak in device_is_usable mirror testing function.
  - Fix memory leak on error path for pvcreate with invalid uuid.
  - Fix resource leak in error path of dmeventd's umount of thin volume.
  - Close open dmeventd FIFO file descriptors on exec (FD_CLOEXEC).
  - o Testing:
  - Fix test for active snapshot in cluster before resizing it.
  - Add python-lvm unit test case
  - o Other:
  - Add --with-thin-repair and --with-thin-dump configure options.
  - Require 1.9 thin pool target version for online thin pool metadata resize.
  - Use local activation for clearing snapshot COW device.
  - Add configure --with-default-profile-subdir to select dir to keep profiles in.
  - Creation of snapshot takes at most 100% origin coverage.
  - Use LC_ALL to set locale in daemons and fsadm instead of lower priority LANG.
  - Remove dependency on fedora-storage-init.service in lvm2 systemd units.
  - Depend on lvm2-lvmetad.socket in lvm2-monitor.service systemd unit.
  - Optimize out setting the same value of read_ahead.
  - Automatically deactivate failed preloaded dm tree node.
  - Process thin messages once to active thin pool target for dm_tree.
  - Move common functionality for thin lvcreate and lvconvert to toollib.
  - o Packaging:
  - Add /etc/lvm/profile dir and /etc/lvm/profile/default.profile to lvm2 package.
  - Do not include /lib/udev and /lib/udev/rules.d in device-mapper package.
  - Fix spec file's util-linux version definition for proper expansion when used.
  - Fix some incorrect changelog dates.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.102-1
changelog:
  - Fix missing build dependency for scripts subdir in Makefile.
  - Fix node up/down handling in clvmd corosync module.
  - Fix 3-thread clvmd deadlock triggered by cleanup on EOF from client.
  - Remove VG from lvmetad before restoring it with vgcfgrestore.
  - Add devtypes report command to display built-in recognised block device types.
  - Fix CC Makefile override which had reverted to using built-in value. (2.02.75)
  - Recognise bcache block devices in filter (experimental).
  - Run lvm2-activation-net after lvm2-activation service to prevent parallel run.
  - Add man page entries for lvmdump's -u and -l options.
  - Fix lvm2app segfault while using lvm_list_pvs_free fn if there are no PVs.
  - Improve of clvmd singlenode locking simulation.
  - lvconvert no longer converts LVs of "mirror" segment type to thinpool.
  - lvconvert no longer converts thinpool sub-LVs to "mirror" segment type.
  - Direct udev to use 3min timeout for LVM devices. Recent udev has default 30s.
  - Do not scan multipath or RAID components and avoid incorrect autoactivation.
  - Fix MD/loop udev handling to fire autoactivation after setup or coldplug only.
  - Make RAID capable of single-machine exclusive operations in a cluster.
  - Drop calculation of read ahead for deactivated volume.
  - Check for exactly one lv segment in validation of thin pools and volumes.
  - Fix dmeventd unmonitoring of thin pools.
  - Fix lvresize for stacked thin pool volumes (i.e. mirrors).
  - Write Completed debug message before reinstating log defaults after command.
  - Refresh existing VG before autoactivation (event retrigger/device reappeared).
  - Use pvscan -b in udev rules to avoid a deadlock on udev process count limit.
  - Add pvscan -b/--background for the command to be processed in the background.
  - Don't assume stdin file descriptor is readable.
  - Avoid unlimited recursion when creating dtree containing inactive pvmove LV.
  - Require exactly 3 arguments for lvm2-activation-generator. Remove defaults.
  - Inform lvmetad about any lost PV label to make it in sync with system state.
  - Support most of lvchange operations on stacked thin pool meta/data LVs.
  - Enable non-clustered pvmove of snapshots and snapshot origins.
  - Add ability to pvmove non-clustered RAID, mirror, and thin volumes.
  - Make lvm2-activation-generator silent unless it's in error state.
  - Remove "mpath major is not dm major" msg for mpath component scan (2.02.94).
  - Prevent cluster mirror logs from being corrupted by redundant checkpoints.
  - Fix ignored lvmetad update on loop device configuration (2.02.99).
  - Use LVM_PATH instead of hardcoded value in lvm2 activation systemd generator.
  - Fix vgck to notice on-disk corruption even if lvmetad is used.
  - Move mpath device filter before partitioned filter (which opens devices).
  - Require confirmation for vgchange -c when no VGs listed explicitly.
  - Also skip /var and /var/log by default in blkdeactivate when unmounting.
  - Add support for bind mounts in blkdeactivate.
  - Add blkdeactivate -v/--verbose for debug output from external tools used.
  - Add blkdeactivate -e/--errors for error messages from external tools used.
  - Suppress messages from external tools called in blkdeactivate by default.
  - Fix inability to remove a VG's cluster flag if it contains a mirror.
  - Fix bug making lvchange unable to change recovery rate for RAID.
  - Prohibit conversion of thin pool to external origin.
  - Workaround gcc v4.8 -O2 bug causing failures if config/checks=1 (32bit arch).
  - Verify clvmd message validity before processing and log error if incorrect.
  - When creating PV on existing LV don't forbid reserved LV names on LVs below.
  - When converting mirrors, default segtype should be the same unless specified.
  - Make "raid1" the default mirror segment type.
  - Fix clogd descriptor leak when daemonizing.
  - Fix clvmd descriptor leak on restart.
  - Add pipe_open/close() to use instead of less efficient/secure popen().
  - Inherit and apply any profile attached to a VG if creating new thin pool.
  - Ignore previous LV seg with alloc contiguous & cling when num stripes varies.
  - Set use_lvmetad=0 on lvmconf --enable-cluster, reset to default on --disable-cluster.
  - Tidy dmeventd fifo initialisation.
  - Detect invalid sector supplied to 'dmsetup message'.
  - Free any previously-set string if a dm_task_set_* function is called again.
  - Do not allow passing empty new name for dmsetup rename.
  - Display any output returned by 'dmsetup message'.
  - Add dm_task_get_message_response to libdevmapper.
  - Create dmeventd timeout threads as "detached" so exit status is freed.
  - Add DM_ABORT_ON_INTERNAL_ERRORS env var support to abort on internal errors.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-1
changelog:
  - Fix possible race during daemon worker thread creation (lvmetad).
  - Fix possible deadlock while clearing lvmetad cache for full rescan.
  - Fix possible race while creating/destroying memory pools.
  - Fix failing metadata repair when lvmetad is used.
  - Fix incorrect memory handling when reading messages from lvmetad.
  - Fix locking in lvmetad when handling the PV which is gone.
  - Run full scan before vgrename operation to avoid any cache name collision.
  - Recognize new flag to skip udev scanning in udev rules and act appropriately.
  - Add support for flagging an LV to skip udev scanning during activation.
  - Improve message when unable to change discards setting on active thin pool.
  - Fix lvconvert when converting to a thin pool and thin LV at once.
  - Ensure vgid matches before removing vgname entry from lvmetad cache.
  - Add --ignoreskippedcluster for exit status success when clustered VGs skipped.
  - Fix 3 minute udev timeout so that it is applied for all LVM volumes.
  - Fix thin/raid & activation config defaults with configure --disable-devmapper.
  - Fix RAID calculation for sufficient allocatable space.
  - lvconvert from linear to mirror or RAID1 now honors mirror_segtype_default.
  - Add thin-performance configuration profile.
  - Add lvm.conf allocation/thin_pool_chunk_size_policy option.
  - Fix contiguous & cling allocation policies for parity RAID.  (2.02.100)
  - Have lvmconf --enable/disable-cluster reset/set use_lvmetad.
  - Add seg_size_pe field to reports.
  - Support start+length notation with command line PE ranges.
  - Exit cleanly with message when pvmove cannot restart because LV is inactive.
  - Define symbolic names for subsystem udev flags in libdevmapper for easier use.
  - Make subsystem udev rules responsible for importing DM_SUBSYSTEM_UDEV_FLAG*.
  - Start using a distinct Epoch number in pkg version for major RHEL release.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-3
changelog:
  - Add configure --enable-udev-systemd-background-jobs.
  - Add lvm2-pvscan@.service to run pvscan as a service for lvmetad/autoactivation.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-4
changelog:
  - Add dev-block-<major>:<minor>.device systemd alias for complete PV tracking.
  - Use major:minor as short form of --major and --minor arg for pvscan --cache.
  - Fix lvconvert swap of poolmetadata volume for active thin pool.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-5
changelog:
  - Fix missing lvmetad scan for PVs found on MD partitions.
  - Add internal flag for temporary LVs to properly direct udev to not interfere.
  - Respect DM_UDEV_DISABLE_OTHER_RULES_FLAG in lvmetad udev rules.
  - Workaround VG refresh race during autoactivation by retrying the refresh.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.103-8
changelog:
  - Use major:minor in lvm2-pvscan@.service for proper global_filter application.
  - Fix SYSTEMD_READY assignment for foreign devices in lvmetad udev rules.
  - Handle failures in temporary mirror used when adding images to mirrors.
  - Compile/link executables with new RELRO and PIE options (non-static builds).
  - Replace hardcoded sbin dir value with rpm variable for clvmd and cmirrord.
  - Install all binary executables with 0555 permissions.
  - Configure with --enable-write_install for writeable executables
    during rpm processing of debug info.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.103-11
changelog:
  - Do not drop SYSTEMD_READY for non-activating events (LVM on MD or loop).
  - Add missing AC_TRY_CCFLAG defined in acinclude.m4 for configuration checks.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-1
changelog:
  - Online thin pool metadata resize requires 1.10 kernel thin pool target.
  - Fix thin LV flagging for udev to skip scanning only if the LV is wiped.
  - Replace use of xfs_check with xfs_repair in fsadm.
  - Mark lvm1 format metadata as FMT_OBSOLETE. Do not use it with lvmetad.
  - Invalidate cached VG struct after a PV in it gets orphaned. (2.02.87)
  - Mark pool format metadata as FMT_OBSOLETE.
  - Syntax and spelling fixes in some man pages.
  - Dependency scan counts with snapshots and external origins.
  - Make sure VG extent size is always greater or equal to PV phys. block size.
  - Optimize double call of stat() for cached devices.
  - Enable support for thin provisioning for default configuration.
  - Return success when inserting dirs and links into device cache.
  - Test for remote exclusive activation after activation fails.
  - Support lvconvert --merge for thin snapshots.
  - Add support to read thin device id from table line entry.
  - Extend lv_remove_single() to not print info about removed LV.
  - Replace open_count check with lv_check_not_in_use() for snapshot open test.
  - Add error messages with LV names for failing lv refresh.
  - Add --splitsnapshot to lvconvert to separate out cow LV.
  - Reinstate origin reload to complete lvconvert -s with active LVs. (2.02.98)
  - Select only active volume groups if vgdisplay -A is used.
  - Add -p and LVM_LVMETAD_PID env var to lvmetad to change pid file.
  - Allow lvmetad to reuse stale socket.
  - Only unlink lvmetad socket on error if created by the same process.
  - Append missing newline to lvmetad missing socket path error message.
  - Check for non-zero aligment in _text_pv_add_metadata_area() to not div by 0.
  - Add allocation/use_blkid_wiping to lvm.conf to enable blkid wiping.
  - Enable blkid_wiping by default if the blkid library is present.
  - Add configure --disable-blkid_wiping to disable libblkid signature detection.
  - Add -W/--wipesignatures lvcreate option to support wiping on new LVs.
  - Add allocation/wipe_signatures_when_zeroing_new_lvs to lvm.conf.
  - Do not connect to lvmetad on vg/lvchange --sysinit -aay and socket absent.
  - Use lv_check_not_in_use() when testing device in use before merging.
  - Check for failure of lvmcache_add_mda() when writing pv.
  - Check for failure of dev_get_size() when reporting device size.
  - Drop extra unneeded '/' when scanning sysfs directory.
  - Fix undef value if skipped clustered VG ignored for toollib PV seg. (2.02.103)
  - Support validation of VG/LV names in liblvm/python.
  - Allow creation of PVs with arguments to liblvm/python.
  - Ensure sufficient metadata copies retained in liblvm/python vgreduce.
  - Fix installation of profiles from conf subdir when not building in srcdir.
  - Show UUIDs for missing PVs in reports.
  - Add reporting of thin_id device id for thin volumes.
  - Fix reporting of empty numerical values for recently-added fields.
  - Use _field_set_percent/value in reporting code.
  - Return success when LV cannot be activated because of volume_list filter.
  - Return proper error state for remote exclusive activation.
  - Fix clvmd message verification to not reject REMOTE flag. (2.02.100)
  - Compare equality of double values with DBL_EPSILON predefined constant.
  - Use additional gcc warning flags by default.
  - Add ignore_lvm_mirrors to config file to read/ignore labels on mirrors.
  - Fix endless loop in blkdeactivate <device>... if unable to umount/deactivate.
  - Remove 2>/dev/null from three lvm commands executed by vgimportclone.
  - Check for open count with a timeout before removal/deactivation of an LV.
  - Report RAID images split with tracking as out-of-sync ("I").
  - Add workaround for deactivation problem of opened virtual snapshot.
  - Disable unsupported merge for virtual snapshot.
  - Revert activation of activated nodes if a node preload callback fails.
  - Avoid busy looping on CPU when dmeventd reads event DM_WAIT_RETRY.
  - Ensure global mutex is held when working with dmeventd thread.
  - Drop taking timeout mutex for un/registering dmeventd monitor.
  - Allow section names in config file data to be quoted strings.
  - Close fifos before exiting in dmeventd restart() error path.
  - Catch invalid use of string sort values when reporting numerical fields.
  - Consistently report on stderr when device is not found for dmsetup info.
  - Skip race errors when non-udev dmsetup build runs on udev-enabled system.
  - Skip error message when holders are not present in sysfs.
  - Require libpthread to build now.
  - Add BuildRequires: libblkid-devel for blkid wiping functionality.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-3
changelog:
  - Drop obsolete multipath rules from 10-dm.rules.
  - Drop cryptsetup rules from 10-dm.rules - cryptsetup >= 1.1.3 sets them.
  - Avoid trying to convert single to thin pool and volume at the same time.
  - Detect thin feature external_origin_extend and limit extend when missing.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-4
changelog:
  - Fix unwanted drop of hold flocks on forked children.
  - Fix merging of old snapshot into thin volume origin.
  - Exit dmeventd with pidfile cleanup instead of raising SIGKILL on DIE request.
  - Add new DM_EVENT_GET_PARAMETERS request to dmeventd protocol.
  - Do not use systemd's reload for dmeventd restart, use dmeventd -R instead.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-5
changelog:
  - Avoid a PV label scan while in a critical section.
  - Add Requires: resource-agents to lvm2-cluster and cmirror subpackage.
  - Add new lvm2-cluster-standalone and cmirror-standalone subpackages.
  - Add systemd native service for clvmd, cmirrord and clustered LV activation.
  - Move obsolete clvmd/cmirrord initscripts to lvm2-sysvinit subpackage.
  - Use --ignoreskippedcluster in lvm2-monitor initscript/systemd unit.
  - Use --ignoreskippedcluster in activation systemd units if use_lvmetad=0.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-6
changelog:
  - Add initial support for LVM cache and cachepool segment types.
  - Include various bug fixes from upcoming lvm2 v2.02.106 release
    detailed in WHATS_NEW and WHATS_NEW_DM file.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-10
changelog:
  - Fix cache consistency in lvmetad when PV moves around.
  - Fix memleak when lvmetad discovers PV to appear on another device.
  - Fix invalid memory read in lvmetad that could cause a deadlock.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-12
changelog:
  - Do not try to check empty pool with scheduled messages.
  - Fix return value in pool_has_message() when quering for any message.
  - Fix dmeventd logging with parallel wait event processing.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-13
changelog:
  - Use VG read lock during 'pvscan --cache -aay' autoactivation.
  - Issue a VG refresh before autoactivation only if the PV has changed/is new.
  - Add flag to lvmetad protocol to indicate the PV scanned has changed/is new.
  - Also add vgname to lvmetad protocol when referencing VGs for PVs scanned.
  - Use correct PATH_MAX for locking dir path.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.105-14
changelog:
  - Increase wait time for finishing initial lvmetad scan that's run in parallel.
  - Reinitialise lvmcache properly on fork to fix polldaemon exiting prematurely.
  - Add more cleanup for stray "cpg_dispatch_failed" cmirror messages.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.111-1
changelog:
  - Update to latest upstream release with various fixes and
    enhancements documented in WHATS_NEW and WHATS_NEW_DM file.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.113-1
changelog:
  - Fix missing rounding to 64KB when estimating optimal thin pool chunk size.
  - Fix size in pvresize "Resizing to ..." verbose msg to show proper result size.
  - Add --cachepolicy and --cachesettings options to lvchange.
  - Validate that converted volume and specified pool volume differ in lvconvert.
  - Fix regression in vgscan --mknodes usage (2.02.112).
  - Respect --prefix when setting CLMVD_PATH configure (2.02.89).
  - Default to configure --enable-udev-systemd-background-jobs for systemd>=205.
  - Fix ignore_vg() to properly react on various vg_read errors (2.02.112).
  - Failed recovery returns FAILED_RECOVERY status flag for vg_read().
  - Exit with non-zero status code when pvck encounters a problem.
  - Fix clean_tree after activation/resume for cache target (2.02.112).
  - Fix memory corruption with sorting empty string lists (1.02.86).
  - Fix man dmsetup.8 syntax warning of Groff
  - Accept unquoted strings and / in place of {} when parsing configs.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-2
changelog:
  - Release socket in daemon_close and protocol string in daemon_open error path.
  - Add --cachepolicy and --cachesettings to lvcreate.
  - Fix regression when parsing /dev/mapper dir (2.02.112).
  - Fix typo in clvmd initscript causing CLVMD_STOP_TIMEOUT var to be ignored.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-3
changelog:
  - Add cache_policy and cache_settings reporting fields.
  - Add missing recognition for --binary option with {pv,vg,lv}display -C.
  - Fix vgimportclone to notify lvmetad about changes done if lvmetad is used.
  - Fix vgimportclone to properly override config if it is missing in lvm.conf.
  - Fix automatic use of configure --enable-udev-systemd-background-jobs.
  - Correctly rename active split LV with -splitmirrors for raid1.
  - Still restrict mirror region size to power of 2 when VG extent size is not.
  - Fix segfault while using selection with regex and unbuffered reporting.
  - Remove unimplemented dm_report_set_output_selection from libdevmapper.h.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-4
changelog:
  - Fix incorrect rimage names when converting from mirror to raid1 LV (2.02.112).
  - Avoid excessive re-reading of metadata and related error messages in pvremove.
  - Check for cmirror availability during cluster mirror creation and activation.
  - Fix possible segfault when using cache_policy and cache_settings fields.
  - Fix reserved values recognition for cache_policy and cache_settings fields.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.114-5
changelog:
  - Report lv_health_status and health attribute also for thin pool.
  - Add lv_error_when_full reporting field.
  - Add support for lvcreate --errorwhenfull y|n for thin pools.
  - Report more info from thin pool status (out of data, metadata-ro, fail).
  - Support error_if_no_space for thin pool target.
  - Do not filter out snapshot origin LVs as unusable devices for an LVM stack.
  - Fix process_each_pv to match item by device not by its PV device name only.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.115-1
changelog:
  - Report segment types without monitoring support as undefined.
  - Support lvchange --errorwhenfull for thin pools.
  - Improve the processing and reporting of duplicate PVs.
  - Add support for lvcreate --errorwhenfull y|n for thin pools
  - Fix lvconvert --repair to honour resilience requirement for segmented RAID LV.
  - Also call lvscan --cache in dmeventd for mirror device update in lvmetad.
  - Filter out partitioned device-mapper devices as unsuitable for use as PVs.
  - Also notify lvmetad about filtered device if using pvscan --cache DevicePath.
  - Add report/compact_output to lvm.conf to enable/disable compact report output.
  - Rename lv_error_when_full reporting field to lv_when_full.
  - Reduce severity of ioctl error message when dmeventd waitevent is interrupted.
  - Report 'unknown version' when incompatible version numbers were not obtained.
  - Add dm_report_compact_fields to remove empty fields from report output.
  - Add BuildRequires: device-mapper-persistent-data for proper thin_check configuration.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.115-2
changelog:
  - Remove rules from 10-dm.rules which handle multipath, rules for handling
    multipath devices are directly part of device-mapper-multipath package.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.115-3
changelog:
  - Preserve chunk size with repair and metadata swap of a thin pool.
  - Fix raid --splitmirror 1 functionality (2.02.112).
  - Fix tree preload to handle splitting raid images.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.124-1
changelog:
  - Add lvm2-lockd subpackage with technical preview of lvm locking daemon.
  - Update to latest upstream release with various fixes and
    enhancements documented in WHATS_NEW and WHATS_NEW_DM file.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.125-1
changelog:
  - Fix getline memory usage in lvmpolld.
  - Add support --clear-needs-check-flag for cache_check of cache pool metadata.
  - Add lvmetactl for developer use only.
  - Rename global/lock_retries to lvmlockd_retries.
  - Replace --enable-lvmlockd by --enable-lockd-sanlock and --enable-lockd-dlm.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.125-2
changelog:
  - lvm2-lockd subpackage requires dlm-lib or sanlock-lib or both
    based on which support is compiled in.
  - lvm2-lockd subpackage requires dlm-lib instead of former dlm
    for lvmlockd daemon with dlm support.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.126-1
changelog:
  - Fix long option hyphen removal. (2.02.122)
  - Fix clvmd freeze if client disappears without first releasing its locks.
  - Fix lvconvert segfaults while performing snapshots merge.
  - Ignore errors during detection if use_blkid_wiping=1 and --force is used.
  - Recognise DM_ABORT_ON_INTERNAL_ERRORS env var override in lvm logging fn.
  - Fix alloc segfault when extending LV with fewer stripes than in first seg.
  - Fix handling of cache policy name.
  - Set cache policy before with the first lvm2 cache pool metadata commit.
  - Fix detection of thin-pool overprovisioning (2.02.124).
  - Fix lvmpolld segfaults on 32 bit architectures.
  - Add lvmlockd lock_args validation to vg_validate.
  - Fix ignored --startstopservices option if running lvmconf with systemd.
  - Hide sanlock LVs when processing LVs in VG unless named or --all used.
  - Introduce libdevmapper wrappers for all malloc-related functions.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.127-1
changelog:
  - Do not init filters, locking, lvmetad, lvmpolld if command doesn't use it.
  - Order fields in struct cmd_context more logically.
  - Add lock_type to lvmcache VG summary and info structs.
  - Fix regression in cache causing some PVs to bypass filters (2.02.105).
  - Make configure --enable-realtime the default now.
  - Add dmstats.8 man page.
  - Add dmstats --segments switch to create one region per device segment.
  - Add dmstats --regionid, --allregions to specify a single / all stats regions.
  - Add dmstats --allprograms for stats commands that filter by program ID.
  - Add dmstats --auxdata and --programid args to specify aux data and program ID.
  - Add report stats sub-command to provide repeating stats reports.
  - Add clear, delete, list, and print stats sub-commands.
  - Add create stats sub-command and --start, --length, --areas and --areasize.
  - Recognize 'dmstats' as an alias for 'dmsetup stats' when run with this name.
  - Add a 'stats' command to dmsetup to configure, manage and report stats data.
  - Add statistics fields to dmsetup -o.
  - Add libdm-stats library to allow management of device-mapper statistics.
  - Add --nosuffix to suppress dmsetup unit suffixes in report output.
  - Add --units to control dmsetup report field output units.
  - Add support to redisplay column headings for repeating column reports.
  - Fix report header and row resource leaks.
  - Report timestamps of ioctls with dmsetup -vvv.
  - Recognize report field name variants without any underscores too.
  - Add dmsetup --interval and --count to repeat reports at specified intervals.
  - Add dm_timestamp functions to libdevmapper.
  - Recognise vg/lv name format in dmsetup.
  - Move size display code to libdevmapper as dm_size_to_string.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.128-1
changelog:
  - Allocation setting cache_pool_cachemode is replaced by cache_mode.
  - Don't attempt to close config file that couldn't be opened.
  - Check for valid cache mode in validation of cache segment.
  - Change internal interface handling cache mode and policy.
  - When no cache policy specified, prefer smq (if available) over mq.
  - Add demo cache-mq and cache-smq profiles.
  - Add cmd profilable allocation/cache_policy,cache_settings,cache_mode.
  - Require cache_check 0.5.4 for use of --clear-needs-check-flag.
  - Fix lvmetad udev rules to not override SYSTEMD_WANTS, add the service instead.
  - Fix 'dmstats list -o all' segfault.
  - Separate dmstats statistics fields from region information fields.
  - Add interval and interval_ns fields to dmstats reports.
  - Do not include internal glibc headers in libdm-timestamp.c (1.02.104)
  - Exit immediately if no device is supplied to dmsetup wipe_table.
  - Suppress dmsetup report headings when no data is output. (1.02.104)
  - Adjust dmsetup usage/help output selection to match command invoked.
  - Fix dmsetup -o all to select correct fields in splitname report.
  - Restructure internal dmsetup argument handling across all commands.
  - Add dm_report_is_empty() to indicate there is no data awaiting output.
  - Add more arg validation for dm_tree_node_add_cache_target().
  - Add --alldevices switch to replace use of --force for stats create / delete.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.129-1
changelog:
  - Drop error message when vgdisplay encounters an exported VG. (2.02.27)
  - Fix shared library generation to stop exporting internal functions.(2.02.120)
  - Accept --cachemode with lvconvert.
  - Fix and improve reporting properties of cache-pool.
  - Enable usage of --cachepolicy and --cachesetting with lvconvert.
  - Don't allow to reduce size of thin-pool metadata.
  - Fix debug buffer overflows in cmirrord logging.
  - Add --foreground and --help to cmirrord.
  - Add 'precise' column to statistics reports.
  - Add --precise switch to 'dmstats create' to request nanosecond counters.
  - Add precise argument to dm_stats_create_region().
  - Add support to libdm-stats for precise_timestamps
  - Fix devmapper.pc pkgconfig file to declare -lrt dependency properly.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.130-1
changelog:
  - Fix use of uninitialized device status if reading outdated .cache record.
  - Restore support for --monitor option in lvcreate (2.02.112).
  - Read thin-pool data and metadata percent without flush.
  - Detect blocked thin-pool and avoid scanning their thin volumes.
  - Check if dm device is usable before checking its size (2.02.116).
  - Extend parsing of cache_check version in configure.
  - Make lvpoll error messages visible in lvmpolld's stderr and in syslog.
  - Add 'make install_full_man' to install all man pages regardless of config.
  - Parse thin-pool status with one single routine internally.
  - Add --histogram to select default histogram fields for list and report.
  - Add report fields for displaying latency histogram configuration and data.
  - Add dmstats --bounds to specify histogram boundaries for a new region.
  - Add dm_histogram_to_string() to format histogram data in string form.
  - Add public methods to libdm to access numerical histogram config and data.
  - Parse and store histogram data in dm_stats_list() and dm_stats_populate().
  - Add an argument to specify histogram bounds to dm_stats_create_region().
  - Add dm_histogram_bounds_from_{string,uint64_t}() to parse histogram bounds.
  - Add dm_histogram handle type to represent a latency histogram and its bounds.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.130-2
changelog:
  - Fix vgimportclone cache_dir path name (2.02.115).
  - Disallow usage of --stripe and --stripesize when creating cache pool.
  - Swapping of LV identifiers handles more complex LVs.
  - Fix VG metadata comparison failure while scanning the VG for lvmetad.
  - Ignore persistent cache if configuration changed. (2.02.127)
  - Do not check for full thin pool when activating without messages (1.02.107).


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.130-3
changelog:
  - Enforce writethrough mode for cleaner policy.
  - Check for enough space in thin-pool in command before creating new thin.


author: Peter Rajnoha <prajnoha@redhat.com> - 7:2.02.130-5.el7_2.1
changelog:
  - Fix possible data loss caused by lost buffered writes during thin pool
    resize after reaching its capacity.


author: Jan Pazdziora <jpazdziora@redhat.com> - 0.6-1
changelog:
  - Make pam_authenticate_with_login_password available for other modules.
  - Reformat documentation to make the Basic Auth usage less prominent.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - switch to nfs-utils as the base tree
  - fix the statfs patch for the new code base
  - single package that obsoletes everything we had before (if I am to keep
    some traces of my sanity with me...)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - Fix incorrect file specifications in statd manpage.
  - Require gawk 'cause it's used in nfslock init script.


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - don't install any rquota pages in _mandir: (#39707, #44119)
  - don't try to manipulate rpc.rquotad in init scripts 
  -   unless said program actually exists: (#43340)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - "service nfs restart" should start services even if currently 
  -   not running (#59469)
  - bump version to 0.3.3-4


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added the setting of lockd ports via sysclt interface
  - Removed queue setting code since its no longer needed


author: <SteveD@RedHat.com>
changelog:
  - Removed gssd tarball and old nfsv4 patch.
  - Added new nfsv4 patches that include both the
     gssd and idmapd daemons
  - Added redhat-only v4 patch that reduces the
     static librpc.a to only contain gss rpc related
     routines (I would rather have gssd use the glibc 
     rpc routines)
  -Changed the gssd svcgssd init scripts to only
     start up if SECURE_NFS is set to 'yes' in
     /etc/sysconfig/nfs


author: <SteveD@RedHat.com>
changelog:
  - Added the addition and deletion of rpc_pipefs to /etc/fstab
  - Added the addition and deletion of module aliases to /etc/modules.conf


author: <SteveD@RedHat.com>
changelog:
  - Added the shutting down of the rpc v4 daemons.
  - Updated the Red Hat only patch with some init script changes.


author: <SteveD@RedHat.com>
changelog:
  - Made the nfs4 daemons initscripts work better when 
    sunrpc is not a module
  - added more checks to see if modules are being used.


author: <SteveD@RedHat.com>
changelog:
  - Created a pipe between the parent and child so 
    the parent process can report the correct exit
    status to the init scripts
  - Added SIGHUP processing to rpc.idmapd and the 
    rpcidmapd init script.


author: <SteveD@RedHat.com>
changelog:
  - Changed the permission on idmapd.conf to 644
  - Added mydaemon code to svcgssd
  - Updated the add_gssd.patch from upstream


author: <SteveD@RedHat.com>
changelog:
  - Removed the auto option from MOUNTD_NFS_V2 and
    MOUNTD_NFS_V3 variables. Since v2 and v3 are on
    by default, there only needs to be away of 
    turning them off.


author: <SteveD@RedHat.com>
changelog:
  - Fixed syntax error in nfs initscripts when
    NETWORKING is not defined
  - Removed sync warning on readonly exports.
  - Changed run levels in rpc initscripts.
  - Replaced modinfo with lsmod when checking
    for loaded modules.


author: <SteveD@RedHat.com>
changelog:
  - nfslock stop is now done on package removals
  - Eliminate 3 syslog messages that are logged for
    successful events.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Major clean up. 
  - Removed all unused/old patches
  - Rename and condensed a number of patches
  - Updated to CITI's nfs-utils-1.0.6-13 patches


author: <SteveD@RedHat.com>
changelog:
  - Make sure the uid/gid of nfsnobody is the
    correct value for all archs (bz# 123900)
  - Fixed some security issues found by SGI (bz# 133556)


author: <SteveD@RedHat.com
changelog:
  - Incorporate some clean up code from Ulrich Drepper (bz# 134025)
  - Fixed the chkconfig number in the rpcgssd, rpcidmapd, and 
    rpcsvcgssd initscrpts (bz# 132284)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added "$RQUOTAD_PORT" variable to nfs.init which
    allows the rpc.rquotad to use a predefined port
    (bz# 124676)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Replaced a memcopy with explicit assignments
    in getquotainfo() of rquotad to fix potential overflow
    that can occur on 64bit machines. (bz 138068)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Fix problem in idmapd that was causing "xdr error 10008"
    errors (bz 142813)
  - make sure the correct hostname is used in the SM_NOTIFY
    message that is sent from a rebooted server which has 
    multiple network interfaces. (bz 139101)

  - Changed nfslock to send lockd a -KILL signal
    when coming down. (bz 125257)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added support to rpcgssd.init and rpcsvcgssd.init scripts
    to insmod security modules.
  - Changed the nfs.init script to bring rpc.svcgssd up and down,
    since rpc.svcgssd is only needed with the NFS server is running.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-3
changelog:
  - Changed xlog to use LOG_INFO instead of LOG_DEBUG
    so debug messages will appear w/out any config
    changes to syslog.conf.
  - Reworked how /etc/exports is setup (bz 151389)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-4
changelog:
  - Fixed a compile error on x86_64 machines in the gss code.
  - Updated the statd-notify-hostname.patch to eliminate 
    a segmentation fault in rpc.statd when an network 
    interface was down. (bz 151828)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-12
changelog:
  - Changed useradd to use new -l flag (bz149407)
  - 64bit fix in gssd code (bz 163139)
  - updated broken dependencies
  - updated rquotad to compile with latest
    quota version.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-16
changelog:
  - Reworked the nfslock init script so if lockd is running
    it will be killed which is what the HA community needs. (bz 162446)
  - Stopped rpcidmapd.init from doing extra echoing when
    condstart-ed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-17
changelog:
  - Updated to latest nfs-utils code in upstream CVS tree
  - Updated libevent from 1.0b to 1.1a
  - Added libgssapi-0.4 and librpcsecgss-0.6 libs from CITI


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-18
changelog:
  - Updated libnfsidmap to 0.11
  - Updated libgssapi to 0.5
  - Made sure the gss daemons and new libs are
    all using the same include files.
  - Removed code from the tree that is no longer used.
  - Add ctlbits patch that introduced the -N -T and -U
    command line flags to rpc.nfsd.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-19
changelog:
  - Updated to latest code in SourceForge CVS
  - Updated to latest CITI patches (1.0.7-4)
  - Fix bug in nfsdreopen by compiling in server defaults


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-1.FC5
changelog:
  - Updated to 1.0.8-rc2 release
  - Broke out libgssapi into its own rpm
  - Move librpcsecgss and libnfsidmap in the new nfs-utils-lib rpm
  - Removed libevent code; Required to be installed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-3.FC5
changelog:
  - Added innetgr patch that changes configure scripts to 
    check for the innetgr function. (bz 177899)


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-4.FC5
changelog:
  - Added new libnfsidmap call, nfs4_set_debug(), to rpc.idmapd
    which turns on debugging in the libarary.


author: <SteveD@RedHat.com> 1.0.8-3
changelog:
  - Split the controlling of nfs version, ports, and protocol 
    into two different patches
  - Fixed and added debugging statements to rpc.mountd.
  - Fixed -p arg to work with priviledged ports (bz 156655)
  - Changed nfslock initscript to set LOCKD_TCPPORT and
    LOCKD_UDPPORT (bz 162133)
  - Added MOUNTD_NFS_V1 variable to version 1 of the
    mount protocol can be turned off. (bz 175729)
  - Fixed gssd to handel mixed case characters in
    the domainname. (bz 186069)


author: <SteveD@RedHat.com> 1.0.9-2
changelog:
  - Enabled the creating of mount.nfs and umount.nfs binaries
  - Added mount option fixes suggested by upstream.
  - Fix lazy umounts (bz 169299)
  - Added -o fsc mount option.


author: <SteveD@RedHat.com> 1.0.9-5
changelog:
  - Changed gssd daemons to cache things in memory
    instead of /tmp which makes selinux much happier.
    (bz 203078)


author: <SteveD@RedHat.com> 1.0.9-6
changelog:
  - Removed the compiling of getiversion and getkversion since
    UTS_RELEASE is no longer defined and these binary are
    not installed.


author: Karel Zak <kzak@redhat.com> 1.0.9-7
changelog:
  - Added support for the mount -s (sloppy) option (#205038)
  - Added nfs.5 man page from util-linux
  - Added info about [u]mount.nfs to the package description


author: Steve Dickson <steved@redhat.com> 1.0.10-2
changelog:
  - Fixed -o remount (bz 210346)
  - fix memory leak in rpc.idmapd (bz 212547)
  - fix use after free bug in dirscancb (bz 212547)
  - Made no_subtree_check a default export option (bz 212218)


author: Steve Dickson <steved@redhat.com> 1.0.10-4
changelog:
  - Doing a connect on UDP sockets causes the linux network
    stack to reject UDP patches from multi-home server with
    nic on the same subnet. (bz 212471)


author: Steve Dickson <steved@redhat.com> 1.0.12-2
changelog:
  - Added condstop to all the initscripts (bz 196934)
  - Made no_subtree_check a default export option (bz 212218)


author: Steve Dickson <steved@redhat.com> 1.0.12-5
changelog:
  - Fix mount.nfs4 to display correct error message (bz 227212)
  - Updated mountd and showmount reverse lookup flags (bz 220772)
  - Eliminate timeout on nfsd shutdowns (bz 222001)
  - Eliminate memory leak in mountd (bz 239536)
  - Make sure statd uses correct uid/gid by chowning
    the /var/lib/nfs/statd with the rpcuser id. (bz 235216)
  - Correct some sanity checking in rpc.nfsd. (bz 220887) 
  - Added missing unlock_mtab() call in moutnd
  - Have mountd hold open etab file to force inode number to change (bz 236823)
  - Create a /etc/sysconfig/nfs with all the possible init script
    variables (bz 234543)
  - Changed nfs initscript to exit with correct value (bz 221874)


author: Steve Dickson <steved@redhat.com> 1.0.10-6
changelog:
  - Make sure the condrestarts exit with a zero value (bz 240225)
  - Stopped /etc/sysconfig/nfs from being overwritten on updates (bz 234543)
  - Added -o nordirplus mount option to disable READDIRPLUS (bz 240357)
  - Disabled the FSCache patch, for now...


author: Steve Dickson <steved@redhat.com> 1.1.0-4
changelog:
  - Make sure the open() system calling in exportfs uses
    mode bits when creating the etab file (bz 252440).


author: Steve Dickson <steved@redhat.com> 1.1.0-5
changelog:
  - Changed the default paths in sm-notify to 
    /var/lib/nfs/statd (bz 258461)
  - Updated exportfs manpage (bz 262861)


author: Steve Dickson <steved@redhat.com> 1.1.1-1
changelog:
  - Updated to latest upstream release, nfs-utils-1.1.1
  - Added the removal of sm-notify.pid to nfslock init script.
  - Changed spec file to use condrestart instead of condstop
    when calling init scripts.
  - Fixed typo in rpc.mountd man page 
  - Turn on 'nohide' automatically for all refer exports (bz 313561)


author: Steve Dickson <steved@redhat.com> 1.1.1-2
changelog:
  - Added -S/--since to the nfsstat(1) manpage
  - The wording in the exportfs man page can be a bit confusing, implying
    that "exportfs -u :/foo" will unexport /foo from all hosts, which it won't
  - Removed nfsprog option since the kernel no longer supports it.
  - Removed mountprog option since the kernel no longer supports it.
  - Stop segfaults on amd64 during warnings messages.
  - Fix bug when both crossmnt and fsid are set.


author: Steve Dickson <steved@redhat.com> 1.1.1-3
changelog:
  - Added in relatime mount option so mount.nfs stays
    compatible with the mount command in util-linux-ng (bz 274301)


author: Steve Dickson <steved@redhat.com> 1.1.1-5
changelog:
  - Stopped mountd from incorrectly logging an error
    (commit 9dd9b68c4c44f0d9102eb85ee2fa36a8b7f638e3)
  - Stop gssd from ignoring the machine credential caches
    (commit 46d439b17f22216ce8f9257a982c6ade5d1c5931)
  - Fixed typo in the nfsstat command line arugments.
    (commit acf95d32a44fd8357c24e8a04ec53fc6900bfc58)
  - Added test to stop buffer overflow in idmapd
    (commit bcd0fcaf0966c546da5043be700587f73174ae25)


author: Steve Dickson <steved@redhat.com> 1.1.2-3
changelog:
  - Documented how to turn off/on protocol support for
    rpc.nfsd in /etc/sysconfig/nfs (bz443625)
  - Corrected the nfslock initscript 'status' return code (bz 441605)
  - Removed obsolete code from the nfslock initscript (bz 441604)


author: Steve Dickson <steved@redhat.com> 1.1.2-7
changelog:
  - Added -D_FILE_OFFSET_BITS=64 to CFLAGS
  - make nfsstat read and print stats as unsigned integers
  - Added (but not installed) the mountstats and nfs-iostat
    python scripts.


author: Steve Dickson <steved@redhat.com> 1.1.2-12
changelog:
  - Changed the default directories for sm-notify (bz 435480)
  - Added 'condstop' to init scripts so service are not
    started when nfs-utils is removed.


author: Steve Dickson <steved@redhat.com> 1.1.3-5
changelog:
  - Reworked init scripts so service will be able to
    stop when some of the checks fail. (bz 462508)
  - Pre-load nfsd when args to rpc.nfsd are given (bz 441983)


author: Steve Dickson <steved@redhat.com> 1.1.4-4
changelog:
  - gssd: unblock DNOTIFY_SIGNAL in case it was blocked
  - Ensure statd gets started if required when non-root
    user mounts an NFS filesystem


author: Steve Dickson <steved@redhat.com> 1.1.4-5
changelog:
  - Make sure /proc/fs/nfsd exists when the nfs init script
    does the exports (bz 473396)
  - Fixed typo in nfs init script that caused rpc.rquotad daemons
    to be started but not stoppped (bz 473929)


author: Steve Dickson <steved@redhat.com> 1.1.4-6
changelog:
  - mount command: remove local getport() implementation
  - mount command: Replace clnt_ping() and getport() calls in probe_port()
  - mount command: Use nfs_error() instead of perror()
  - mount command: Use nfs_pmap_getport() in probe_statd()


author: Steve Dickson <steved@redhat.com> 1.1.4-8
changelog:
  - mount command: AF_INET6 support for probe_bothports()
  - mount command: support AF_INET6 in probe_nfsport() and probe_mntport()
  - mount command: full support for AF_INET6 addresses in probe_port()
  - gssd/svcgssd: add support to retrieve actual context expiration
  - svcgssd: use the actual context expiration for cache


author: Steve Dickson <steved@redhat.com> 1.1.4-9
changelog:
  - text-based mount command: add function to parse numeric mount options
  - text-based mount command: use po_get_numeric() for handling retry
  - sm-notify command: fix a use-after-free bug
  - statd: not unlinking host files


author: Steve Dickson <steved@redhat.com> 1.1.4-11
changelog:
  - Added warnings to tcp wrapper code when mounts are 
    denied due to misconfigured DNS configurations.
  - gssd: By default, don't spam syslog when users' credentials expire
  - mount: revert recent fix for build problems on old systems
  - mount: use gethostbyname(3) when building on old systems
  - mount: getport: don't use getaddrinfo(3) on old systems
  - mount: Random clean up
  - configure: use "--disable-uuid" instead of	"--without-uuid"


author: Steve Dickson <steved@redhat.com> 1.1.4-12
changelog:
  - configure: Remove inet_ntop(3) check from configure.ac
  - configure: Add new build option "--enable-tirpc"
  - showmount command: Quiesce warning when TI-RPC is disabled


author: Steve Dickson <steved@redhat.com> 1.1.4-14
changelog:
  - text-based mount command: make po_rightmost() work for N options
  - text-based mount command: Function to stuff "struct pmap" from mount options
  - text-based mount options: Use new pmap stuffer when	rewriting mount options
  - text-based mount command: fix mount option rewriting logic
  - text-based mount command: support AF_INET6 in rewrite_mount_options()


author: Steve Dickson <steved@redhat.com> 1.1.4-15
changelog:
  - Reworked tcp wrapper code to correctly use API (bz 480223)
  - General clean up of tcp wrapper code.


author: Steve Dickson <steved@redhat.com> 1.1.4-18
changelog:
  - umount.nfs command: Add an AF_INET6-capable version of nfs_call_unmount()
  - umount.nfs command: Support AF_INET6 server addresses
  - umount command: remove do_nfs_umount23 function


author: Steve Dickson <steved@redhat.com> 1.1.5-2
changelog:
  - Fixed lockd not using settings in sysconfig/nfs (bz 461043)
  - Fixed some lost externs in the tcpwrapper code


author: Steve Dickson <steved@redhat.com> 1.1.5-4
changelog:
  - Added upstream rc3 patch
    - gssd: initialize fakeseed in prepare_krb5_rfc1964_buffer
    - gssd: NULL-terminate buffer after read in read_service_info (try #2)
    - gssd: free buffer allocated by gssd_k5_err_msg
    - gssd: fix potential double-frees in gssd
    - Removed a number of warn_unused_result warnings


author: Steve Dickson <steved@redhat.com> 1.1.6-3
changelog:
  - Added upstream 1.1.7-rc1 patch 
    - utils/nfsd: add support for minorvers4
    - sm-notify: Don't orphan addrinfo structs
    - sm-notify: Failed DNS lookups should be retried
    - mount: remove legacy version of nfs_name_to_address()
    - compiling error in rpcgen
    - nfs-utils: Fix IPv6 support in support/nfs/rpc_socket.c
    - umount.nfs: Harden umount.nfs error reportin


author: Tom "spot" Callaway <tcallawa@redhat.com> 1.1.6-4
changelog:
  - Replace the Sun RPC license with the BSD license, with the explicit permission of Sun Microsystems


author: Steve Dickson <steved@redhat.com> 1.2.0-4
changelog:
  - Added upstream 1.2.1-rc1 patch 
    - Fix to check in closeall()
    - Make --enable-tirpc the default
    - Set all verbose types in gssd daemons
    - Retry exports if getfh() fails


author: Steve Dickson <steved@redhat.com> 1.2.0-6
changelog:
  - Added NFSD v4 dynamic pseudo root patch which allows
    NFS v3 exports to be mounted by v4 clients.


author: Steve Dickson <steved@redhat.com> 1.2.0-9
changelog:
  - Added upstream 1.2.1-rc3 patch
    - Add IPv6 support to nfsd
    - Allow nfssvc_setfds to properly deal with AF_INET6
    - Convert nfssvc_setfds to use getaddrinfo
    - Move check for active knfsd to helper function
    - Declare a static common buffer for nfssvc.c routine
    - Convert rpc.nfsd to use xlog() and add --debug and --syslog options


author: Steve Dickson <steved@redhat.com> 1.2.0-10
changelog:
  - Added upstream 1.2.1-rc4 patch
    - Fix bug when both crossmnt
    - nfs(5): Add description of lookupcache mount option
    - nfs(5): Remove trailing blanks
    - Added nfs41 support to nfssat
    - Added support for mount to us a configuration file.


author: Steve Dickson <steved@redhat.com> 1.2.0-11
changelog:
  - Added upstream 1.2.1-rc5 patch
    - Added --sort --list functionality to nfs-iostat.py
    - Fixed event handler in idmapd
    - Added -o v4 support
    - Disabled IPv6 support in nfsd
    - Don't give client an empty flavor list
    - Fixed gssed so it does not blindly caches machine credentials


author: Steve Dickson <steved@redhat.com> 1.2.0-13
changelog:
  - Added upstream 1.2.1-rc5 patch
    - mount.nfs: Support negotiation between v4, v3, and v2
    - mount.nfs: Keep server's address in nfsmount_info
    - mount.nfs: Sandbox each mount attempt
    - mount.nfs: Support negotiation between v4, v3, and v2


author: Steve Dickson <steved@redhat.com> 1.2.0-15
changelog:
  - Change the nfsmount.conf file to define v3 as the default 
    protocol version.
  - Make sure versions set on the command line override version
    set in nfsmount.conf
  - Make version rollbacks still work when versions are set in
    nfsmount.conf


author: Steve Dickson <steved@redhat.com> 1.2.0-17
changelog:
  - Updated to the latest pseudo root release (rel7).
  - Added upstream 1.2.1-rc7 patch which fixes:
    - Stop ignoring the -o v4 option (bz 529407)
    - Allow network protocol roll backs when proto is set
      in the config file (bz 529864)
  - v4 mounts will roll back to v3 mounts when the mount
    fails with ENOENT.


author: Steve Dickson <steved@redhat.com> 1.2.1-10
changelog:
  - Updated to the latest pseudo root release (rel10) which
    containts the upstream pseudo root release


author: Steve Dickson <steved@redhat.com> 1.2.1-11
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-2-2-rc7
    which includes Ipv6 support for statd (disabled by default).


author: Steve Dickson <steved@redhat.com> 1.2.1-12
changelog:
  - Updated to latest upstream RC release: nfs-utils-1-2-2-rc7
    which includes Ipv6 support for tcpwrapper (disabled by default).


author: Steve Dickson <steved@redhat.com> 1.2.1-13
changelog:
  - mount.nfs: Configuration file parser ignoring options
  - mount.nfs: Set the default family for lookups based on 
      defaultproto= setting
  - Enabled ipv6


author: Steve Dickson <steved@redhat.com> 1.2.3-2
changelog:
  - Initscripts do not conform to LSB specification (bz 621562)
  - sm-notify needs to call res_init() before each try (bz 625531)
  - exports(5) man page duplicated paragraphs (bz 590921)


author: Steve Dickson <steved@redhat.com> 1.2.3-4
changelog:
  - The nfs service is not stopped on reboot or halt (bz 652786)
  - Removed obsolete configuration values (bz 653765)


author: Steve Dickson <steved@redhat.com> 1.2.3-7
changelog:
  - Updated to latest upstream release: nfs-utils-1-2-4-rc5
  - Add initscripts changes needed for rpcbind to be running when nfs is started
  - Initscripts changes needed to support NFS over RDMA
  - Allow the setting of the NFSv4 grace period (bz 665387)


author: J. Bruce Fields <bfields@redhat.com> 1.2.4-1
changelog:
  - Rely on crypto module autoloading in init scripts
  - initscripts: just try to mount rpc_pipefs always


author: Steve Dickson <steved@redhat.com> 1.2.4-4
changelog:
  - Converted init scrips to systemd services. (bz 699040)
  - Made nfsnobody's uid/gid to always be a 16-bit value of -2
  - mount: fix for libmount from util-linux >= 2.20


author: Steve Dickson <steved@redhat.com> 1.2.4-7
changelog:
  - Added StandardError=syslog+console to all the service files
    so startup errors will be logged. 
  - Changed exportfs to only log errors on existing /etc/export.d 
    directory, which eliminates a needless syslog entry.
  - Automount /proc/fs/nfsd for rpc.nfsd


author: Steve Dickson <steved@redhat.com> 1.2.4-9
changelog:
  - Both the nfs.lock and nfs.idmap services should always
    enabled on both installs and upgrades (bz 699040)
  - Fixed the paths to the server scriptlets (bz 733531)


author: Steve Dickson <steved@redhat.com> 1.2.5-1
changelog:
  - Update to upstream RC release: nfs-utils-1.2.6-rc1
  - Added named.service to After list in nfs-server.service (bz 742746)


author: Steve Dickson <steved@redhat.com> 1.2.5-2
changelog:
  - Removed SUID bits on mount commands (bz 528498)
  - Fixed a few typos in a couple man pages (bz 668124, 673818, 664330)
  - Fixed a I/0 problem in rpc.idmapd (bz 684308)


author: Steve Dickson <steved@redhat.com> 1.2.5-5
changelog:
  - Ensured nfs-idmap service is started after the network up (bz 748275)
  - Update to upstream RC release: nfs-utils-1.2.6-rc3 (bz 746497)


author: Steve Dickson <steved@redhat.com> 1.2.5-6
changelog:
  - Remove RQUOTAD_PORT and RQUOTAD from /etc/sysconfig/nfs (bz 754496)
  - Ensured nfs-idmap service is started after the named is up (bz 748275)


author: Steve Dickson <steved@redhat.com> 1.2.5-7
changelog:
  - Enabled new idmaping by installing the id_resolver.conf file.
  - Update to upstream RC release: nfs-utils-1.2.6-rc4


author: Steve Dickson <steved@redhat.com> 1.2.5-11
changelog:
  - Update to upstream RC release: nfs-utils-1.2.6-rc6
  - Reworked how the nfsd service requires the rpcbind service (bz 768550)


author: Steve Dickson <steved@redhat.com> 1.2.5-13
changelog:
  - Make sure statd is start before NFS mounts (bz 786050)
  - rpc.idmap: Hide global symbols from libidmap plugins (bz 797332)
  - nfsd: Bump up the default to 8 nprocs (bz 757452)


author: Steve Dickson <steved@redhat.com> 1.2.5-14
changelog:
  - gssd: Look for user creds in user defined directory (bz 786993)
  - gssd: Don't link with libgssapi_krb5 (bz 784908)


author: Steve Dickson <steved@redhat.com> 1.2.6-0
changelog:
  - Update to the latest upstream release: nfs-utils-1.2.6 (bz 821673)
  - Split out NFS server daemons into individual service files (bz 769879) 
  - Removed Wants= from nfs-lock.service (bz 817895)
  - Only enable services if they are enabled on upgrades (bz 807020)


author: Steve Dickson <steved@redhat.com> 1.2.6-1
changelog:
  - Correctly search for the existence of nfsnobody (bz 816149)
  - Correctly change the default group id for nfsnobody (bz 816149)


author: Steve Dickson <steved@redhat.com> 1.2.6-12
changelog:
  - Added FedFS support by added a BuildRequires for fedfs-utils-devel
  - Introduce new systemd-rpm macros (bz 850227)
  - Updated to latest upstream RC release: nfs-utils.1.2.7-rc5 (bz 833024)


author: Steve Dickson <steved@redhat.com> 1.2.6-14
changelog:
  - Allow the service to start when RPCNFSDCOUNT is comment out. (bz 870143)
  - Removed some old cruft from the spec file (bz 226198)


author: Steve Dickson <steved@redhat.com> 1.2.7-3
changelog:
  - Updated to latest upstream RC release: nfs-utils.1.2.8-rc3
  - Took ownership of /usr/lib/nfs-utils (bz 894535)


author: Steve Dickson <steved@redhat.com> 1.2.7-5
changelog:
  - Updated to latest upstream RC release: nfs-utils.1.2.8-rc4
  - Added nfs-lock.service to After line in nfs-server.service (bz 914792)


author: Steve Dickson <steved@redhat.com> 1.2.8-2.0
changelog:
  - Update to latest upstream RC release: nfs-utils.1.2.9-rc1
  - Added GSS_USE_PROXY variable to nfs.sysconfig (bz 967112)


author: Steve Dickson <steved@redhat.com> 1.2.9-0.5
changelog:
  - Reverted patch for bz1029573. The kernel can now detect 
    when rpc.gssd is or is not running (bz1031197)
  - gssd: always reply to rpc-pipe requests from kernel. (bz1031197)


author: Steve Dickson <steved@redhat.com> 1.2.9-2.0
changelog:
  - Updated to the latest upstream RC release nfs-utils-1.2.10-rc2
    - mount.nfs: Eliminated long delays during mount (bz 1031643)
    - exportfs: Corrected erroneously error messages (bz 1049589)


author: Steve Dickson <steved@redhat.com> 1.2.9-3.0
changelog:
  - Updated to the latest upstream RC release nfs-utils-1.2.10-rc3
    - exportfs: Exit with correct value when an error occurs (bz 1053933)
    - mount.nfs: Removed supported flag from usage string (bz 1000989)
    - gssd: Improve first attempt at acquiring GSS credentials (bz 1053877)
    - rpc.idmapd: Remove no longer supported flags from man page (bz 1003513)
    - rpc.statd: Allow usage messages to be displayed when statd is running. (bz 1037044)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.0
changelog:
  - Updated to latest upstream release: nfs-utils-1-3-0
    - mount.nfs: Fix fallback from tcp to udp (bz 984901)
    - nfsidmap: Keys need to be invalidated instead of revoked (bz 1080505)
  - Removed RDMA_PORT stub from /etc/sysconfig/nfs (bz 1078792)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.1
changelog:
  - Added configurable timeout to rpc.gssd (bz 1009528)
  - Added callback to sm_notify (bz 1108105)
  - mountd: Fixed path in start-statd (bz 1116794)
  - rpc.gssd: Fixed silent error message (bz 1117384)
  - rpc.gssd: add the acceptor name to the info passed in downcall (bz 1088011)
  - nfs-utils.spec: fixed runtime configuration files (bz 1118177)
  - exportfs: fix test of NULL pointer in host_pton() (bz 1083018)
  - gssd: Fixed errno typo in get_servername() (bz 1082480)
  - nfsiostat: documented the output better (bz 1109864)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.2
changelog:
  - Upgrade to latest upstream systemd scripts  (bz 1144440)
  - Taught start-statd to use systemd  (bz 1144440)
  - Repaced rpc.svcgssd with gssproxy (bz 1082746)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.6
changelog:
  - Corrected argument names in the systemd scripts (bz 1170364)
  - Added RELRO check (bz 1092543)
  - Properly parse IPv6 literal strings with null termination (bz 1161490)
  - Added the 'nordirplus' export flag to disable v3 readdirplus (bz 1161458)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.8
changelog:
  - Stop sm-notify from running in HA environments (bz 1182692)
  - Set the GSS_USE_PROXY variable in nfs-utils_env.sh (bz 1183821)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.10
changelog:
  - Updated mountstats to latest upstream version (bz 1215808)
  - Enable all auth flavors on pseudofs exports (bz 1187223)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.11
changelog:
  - Added the rpcuser group before adding the rpcuser uid (bz 1190874)
  - Added back variables to help get through firewalls (bz 1208488)
  - Made the postuns conditional (bz 1200713)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.12
changelog:
  - Fixed nfs-idmap start race (bz 1164064)
  - Updated nfsdcltrack v2 schema (bz 1234598)
  - Added missing arguments in rpc.mountd man page (bz 1003558)
  - Added nfsconfig.conf to nfs.man and mount.nfs.man (bz 1196646)
  - nfs-server now Requires rpcbind.service (bz 1171603)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.18
changelog:
  - Stop gssd from silenty reaps cache (bz 1256469)
  - Remove errant echo call from spec file (bz 1257144)
  - Add more symlinks to make systemd scripts backwards compatible (bz 1159183)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.21
changelog:
  - Stop gssd from flooding the KDC with TGT fetches (bz 1264999)
  - Decouple the start/stop of rpcbind with nfs-server and rpc-statd (bz 1266993)


author: Steve Dickson <steved@redhat.com> 1.3.0-0.21_2
changelog:
  - exportfs: Restore the EAI_NONAME check in host_pton() (bz 1288435)
  - gssd: Don't assume the machine account will be in uppercase (bz 1288433)


author: Christopher Aillon <caillon@redhat.com> 3.11-0.cvs
changelog:
  - Initial import into Fedora Core, based on a CVS snapshot of
    the NSS_3_11_RTM tag
  - Fix up the pkcs11-devel subpackage to contain the proper headers
  - Build with RPM_OPT_FLAGS
  - No need to have rpath of /usr/lib in the pc file


author: Kai Engert <kengert@redhat.com> - 3.11.3-2
changelog:
  - Revert the attempt to require latest NSPR, as it is not yet available
    in the build infrastructure.


author: Kai Engert <kengert@redhat.com> - 3.11.5-1
changelog:
  - Update to 3.11.5
  - This update fixes two security vulnerabilities with SSL 2
  - Do not use -rpath link option
  - Added several unsupported tools to tools package


author: Kai Engert <kengert@redhat.com> - 3.11.5-2
changelog:
  - Fix rhbz#230545, failure to enable FIPS mode
  - Fix rhbz#220542, make NSS more tolerant of resets when in the 
    middle of prompting for a user password.


author: Kai Engert <kengert@redhat.com> - 3.11.7-2
changelog:
  - Update to 3.11.7, but freebl/softokn remain at 3.11.5.
  - Use a workaround to avoid mozilla bug 51429.


author: Kai Engert <kengert@redhat.com> - 3.11.7-10
changelog:
  - Add /etc/prelink.conf.d/nss-prelink.conf in order to blacklist
    our signed libraries and protect them from modification.


author: Kai Engert <kengert@redhat.com> - 3.11.99.3-2
changelog:
  - Build against gcc 4.3.0, use workaround for bug 432146
  - Run the test suite after the build and abort on failures.


author: Kai Engert <kengert@redhat.com> - 3.12.0.3-3
changelog:
  - nss package should own /etc/prelink.conf.d folder, rhbz#452062
  - use upstream patch to fix test suite abort


author: Kai Engert <kaie@redhat.com> - 3.12.3-3
changelog:
  - ship .chk files instead of running shlibsign at install time
  - include .chk file in softokn-freebl subpackage
  - add patch for upstream nss bug 488350


author: Kai Engert <kaie@redhat.com> - 3.12.3-7
changelog:
  - re-enable test suite
  - add patch for upstream bug 488646 and add newer paypal
    certs in order to make the test suite pass


author: Elio Maldonado <emaldona@redhat.com> - 3.12.3.99.3-5
changelog:
  - updated pem module incorporates various patches
  - fix off-by-one error when computing size to reduce memory leak. (483855)
  - fix data type to work on x86_64 systems. (429175)
  - fix various memory leaks and free internal objects on module unload. (501080)
  - fix to not clone internal objects in collect_objects().  (501118)
  - fix to not bypass initialization if module arguments are omitted. (501058)
  - fix numerous gcc warnings. (500815)
  - fix to support arbitrarily long password while loading a private key. (500180) 
  - fix memory leak in make_key and memory leaks and return values in pem_mdSession_Login (501191)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.3.99.3-10
changelog:
  - must install libnssutil3.since nss-util is untagged at the moment
  - preserve time stamps when installing various files


author: Elio Maldonado+emaldona@redhat.com - 3.12.3.99.3-11
changelog:
  - split off nss-softokn and nss-util as subpackages with their own rpms
  - first phase of splitting nss-softokn and nss-util as their own packages


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-19
changelog:
  - remove patches that are now in nss-softokn and
  - remove spurious exec-permissions for nss.pc per rpmlint
  - single requires line in nss.pc.in


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-22
changelog:
  - Fix nss-config not to include nssutil
  - Add BuildRequires on nss-softokn and nss-util since build also runs the test suite


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-25
changelog:
  - Remove nss-prelink.conf as signed all shared libraries moved to nss-softokn
  - Add a temprary hack to nss.pc.in to unblock builds


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-29
changelog:
  - Restoring patches 2 and 7 as we still compile all sources
  - Applying the nss-nolocalsql.patch solves nss-tools sqlite dependency problems


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-30
changelog:
  - Fix FORTIFY_SOURCE buffer overflows in test suite on ppc and ppc64 - bug 519766
  - Fixed requires and buildrequires as per recommendations in spec file review


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-2
changelog:
  - Remove symbolic links to shared libraries from devel - 521155
  - No rpath-link in nss-softokn-config


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-3
changelog:
  - PEM module implements memory management for internal objects - 509705
  - PEM module doesn't crash when processing malformed key files - 512019


author: Elio Maldonado<emaldona@redhat.com - 3.12.4-9
changelog:
  - Install blank databases and configuration file for system shared database
  - nsssysinit queries system for fips mode before relying on environment variable


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-13
changelog:
  - User no longer prompted for a password when listing keys an empty system db (#527048)
  - Fix setup-nsssysinit to handle more general formats (#527051)


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-13.1
changelog:
  - Require nss-softoken of same architecture as nss (#527867)
  - Merge setup-nsssysinit.sh improvements from F-12 (#527051)


author: Elio Maldonado<emaldona@redhat.com> - 3.12.5-1
changelog:
  - Update to 3.12.5
  - Patch to allow ssl/tls clients to interoperate with servers that require renogiation


author: Elio Maldonado<emaldona@redhat.com> - 3.12.5-1.5
changelog:
  - Fix nsssysinit to set the default flags on the crypto module (#545779)
  - Remove redundant header from the pem module


author: Elio Maldonado<emaldona@redhat.com> - 3.12.5-1.6
changelog:
  - Fix nsssysinit to enable apps to use system cert store, patch contributed by David Woodhouse (#546221)
  - Fix spec so sysinit requires coreutils for post install scriplet (#547067)
  - Fix segmentation fault when listing keys or certs in the database, patch contributed by Kamil Dudka (#540387)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.6-1.1
changelog:
  - Using SSL_RENEGOTIATE_TRANSITIONAL as default while on transition period
  - Disabling ssl tests suites until bug 539183 is resolved


author: Elio Maldonado <emaldona@redhat.com> - 3.12.6-3
changelog:
  - Add sed to sysinit requires as setup-nsssysinit.sh requires it (#576071)
  - Update PayPalEE test cert with unexpired one (#580207)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.6-5
changelog:
  - Update pem source tar to pick up the following bug fixes:
  - PEM - Allow collect objects to search through all objects
  - PEM - Make CopyObject return a new shallow copy
  - PEM - Fix memory leak in pem_mdCryptoOperationRSAPriv


author: Elio Maldonado <emaldona@redhat.com> - 3.12.7-2
changelog:
  - Define NSS_USE_SYSTEM_SQLITE and remove unneeded patch
  - Add comments regarding an unversioned provides which triggers rpmlint warning
  - Build requires nss-softokn-devel >= 3.12.7


author: Elio Maldonado <emaldona@redhat.com> - 3.12.8-1
changelog:
  - Update to 3.12.8
  - Prevent disabling of nss-sysinit on package upgrade (#636787)
  - Create pkcs11.txt with correct permissions regardless of umask (#636792) 
  - Setup-nsssysinit.sh reports whether nss-sysinit is turned on or off (#636801)
  - Added provides pkcs11-devel-static to comply with packaging guidelines (#609612)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.8-3
changelog:
  - Replace posttrans sysinit scriptlet with a triggerpostun one (#636787)
  - Fix and cleanup the setup-nsssysinit.sh script (#636792, #636801)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.8.99.2-1
changelog:
  - Update to NSS_3_12_9_BETA2
  - Fix libpnsspem crash when cacert dir contains other directories (#642433)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-5
changelog:
  - Fix the earlier infinite recursion patch (#499444)
  - Remove a header that now nss-softokn-freebl-devel ships


author: Christopher Aillon <caillon@redhat.com> - 3.12.9-6
changelog:
  - Revert patches for 499444 as they use a C++ reserved word and
    cause compilation of Firefox to fail


author: Elio Maldonado <emaldona@redhat.com> - 3.12.9-10
changelog:
  - Fix cms headers to not use c++ reserved words (#676036)
  - Reenabling Bug 499444 patches
  - Fix to swap internal key slot on fips mode switches


author: Elio Maldonado <emaldona@redhat.com> - 3.12.10-4
changelog:
  - Enable pluggable ecc support (#712556)
  - Disable the nssdb write-access-on-read-only-dir tests when user is root (#646045)


author: Elio Maldonado <emaldona@redhat.com> - 3.12.11-3
changelog:
  - Fix attempt to free initilized pointer (#717338)
  - Fix leak on pem_CreateObject when given non-existing file name (#734760)
  - Fix pem_Initialize to return CKR_CANT_LOCK on multi-treaded calls (#736410)


author: Elio Maldonado Batiz <emaldona@redhat.com> - 3.13.1-4
changelog:
  - Rebuild with nss-softokn from 3.12 in the buildroot
  - Allows the pem module to statically link against 3.12.x freebl
  - Required for using nss-3.13.x with nss-softokn-3.12.y for a merge inrto rhel git repo
  - Build will be temprarily placed on buildroot override but not pushed in bodhi


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-5
changelog:
  - Statically link the pem module against system freebl found in buildroot
  - Disabling sha224-related powerup selftest until we update softokn
  - Disable sha224 and pss tests which nss-softokn 3.12.x doesn't support


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-6
changelog:
  - Removed unwanted /usr/include/nss3 in front of the normal cflags include path
  - Removed unnecessary patch dealing with CERTDB_TERMINAL_RECORD, it's visible


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-7
changelog:
  - Resolves: Bug 750376 - nss 3.13 breaks sssd TLS
  - Fix how pem is built so that nss-3.13.x works with nss-softokn-3.12.y
  - Only patch blapitest for the lack of sha224 on system freebl
  - Completed the patch to make pem link against system freebl


author: elio maldonado <emaldona@redhat.com> - 3.13.1-9
changelog:
  - Revert to using current nss_softokn_version
  - Patch to deal with lack of sha224 is no longer needed


author: Elio Maldonado <emaldona@redhat.com> - 3.13.1-10
changelog:
  - Resolves: Bug 770682 - nss update breaks pidgin-sipe connectivity
  - NSS_SSL_CBC_RANDOM_IV set to 0 by default and changed to 1 on user request


author: Elio Maldonado <emaldona@redhat.com> - 3.13.3-2
changelog:
  - Pick up fixes from RHEL
  - Resolves: rhbz#800674 - Unable to contact LDAP Server during winsync
  - Resolves: rhbz#800682 - Qpid AMQP daemon fails to load after nss update
  - Resolves: rhbz#800676 - NSS workaround for freebl bug that causes openswan to drop connections


author: Elio Maldonado <emaldona@redhat.com> - 3.13.4-1
changelog:
  - Update to NSS_3_13_4_RTM
  - Update the nss-pem source archive to the latest version
  - Remove no longer needed patches
  - Resolves: Bug 806043 - use pem files interchangeably in a single process
  - Resolves: Bug 806051 - PEM various flaws detected by Coverity
  - Resolves: Bug 806058 - PEM pem_CreateObject leaks memory given a non-existing file name


author: Elio Maldonado <emaldona@redhat.com> - 3.13.4-2
changelog:
  - Resolves: Bug 805723 - Library needs partial RELRO support added
  - Patch coreconf/Linux.mk as done on RHEL 6.2


author: Elio Maldonado <emaldona@redhat.com> - 3.13.5-4
changelog:
  - Resolves: Bug 830410 - Missing Requires %{?_isa}
  - Use Requires: %{name}%{?_isa} = %{version}-%{release} on tools
  - Drop zlib requires which rpmlint reports as error E: explicit-lib-dependency zlib
  - Enable sha224 portion of powerup selftest when running test suites
  - Require nspr 4.9.1


author: Elio Maldonado <emaldona@redhat.com> - 3.13.5-8
changelog:
  - Rebase pem sources to fedora-hosted upstream to pick up two fixes from rhel-6.3
  - Resolves: rhbz#847460 - Fix invalid read and free on invalid cert load
  - Resolves: rhbz#847462 - PEM module may attempt to free uninitialized pointer 
  - Remove unneeded fix gcc 4.7 c++ issue in secmodt.h that actually undoes the upstream fix


author: Elio Maldonado <emaldona@redhat.com> - 3.14-0.1.rc.1
changelog:
  - Update to NSS_3_14_RC1
  - update nss-589636.patch to apply to httpdserv
  - turn off ocsp tests for now
  - remove no longer needed patches
  - remove headers shipped by nss-util


author: Elio Maldonado <emaldona@redhat.com> - 3.14-2
changelog:
  - Add secmodt.h to the headers installed by nss-devel
  - nss-devel must install secmodt.h which moved from softoken to pk11wrap with nss-3.14


author: Elio Maldonado <emaldona@redhat.com> - 3.14-5
changelog:
  - Fix the spec file so sechash.h gets installed
  - Resolves: rhbz#871882 - missing header: sechash.h in nss 3.14


author: Elio Maldonado <emaldona@redhat.com> - 3.14-6
changelog:
  - Fix a previous unwanted merge from f18
  - Update the SS_SSL_CBC_RANDOM_IV patch to match new sources while
  - Keeping the patch disabled while we are still in rawhide and
  - State in comment that patch is needed for both stable and beta branches
  - Update .gitignore to download only the new sources


author: Elio Maldonado <emaldona@redhat.com> - 3.14-7
changelog:
  - Add a dummy source file for testing /preventing fedpkg breakage
  - Helps test the fedpkg new-sources and upload commands for breakage by nss updates
  - Related to Bug 872124 - nss 3.14 breaks fedpkg new-sources


author: Elio Maldonado <emaldona@redhat.com> - 3.14-8
changelog:
  - Fix pk11wrap locking which fixes 'fedpkg new-sources' and 'fedpkg update' hangs
  - Bug 872124 - nss-3.14 breaks fedpkg new-sources
  - Fix should be considered preliminary since the patch may change upon upstream approval


author: Elio Maldonado <emaldona@redhat.com> - 3.14-9
changelog:
  - Disable bypass code at build time and return failure on attempts to enable at runtime
  - Bug 806588 - Disable SSL PKCS #11 bypass at build time


author: Elio Maldonado <emaldona@redhat.com> - 3.14-11
changelog:
  - Bug 879978 - Install the nssck.api header template in a place where mod_revocator can access it
  - Install nssck.api in /usr/includes/nss3


author: Elio Maldonado <emaldona@redhat.com> - 3.14-12
changelog:
  - Bug 879978 - Install the nssck.api header template where mod_revocator can access it
  - Install nssck.api in /usr/includes/nss3/templates


author: Elio Maldonado <emaldona@redhat.com> - 3.14.3-1
changelog:
  - Update to NSS_3_14_3_RTM
  - sync up pem rsawrapr.c with softoken upstream changes for nss-3.14.3
  - Resolves: rhbz#908257 - CVE-2013-1620 nss: TLS CBC padding timing attack
  - Resolves: rhbz#896651 - PEM module trashes private keys if login fails
  - Resolves: rhbz#909775 - specfile support for AArch64
  - Resolves: rhbz#910584 - certutil -a does not produce ASCII output


author: Kai Engert <kaie@redhat.com> - 3.14.3-9
changelog:
  - Configure libnssckbi.so to use the alternatives system
    in order to prepare for a drop in replacement.


author: Elio Maldonado <emaldona@redhat.com> - 3.15-5
changelog:
  - Install man pages for nss-tools and the nss-config and setup-nsssysinit scripts
  - Resolves: rhbz#606020 - nss security tools lack man pages


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-2
changelog:
  - Update to NSS_3_15_1_RTM
  - Apply various fixes to the man pages and add new ones
  - Enable the iquote.patch to access newly introduced types
  - Add man page for pkcs11.txt configuration file and cert and key databases
  - Add missing option descriptions for {cert|cms|crl}util
  - Resolves: rhbz#948495 - Man page scan results for nss
  - Resolves: rhbz#982723 - Fix path to script in man page for nss-sysinit


author: Elio Maldonado <emaldona@redhat.com> - 3.15.1-4
changelog:
  - Install symlink to nss-sysinit.sh without the .sh suffix
  - Resolves: rhbz#982723 - nss-sysinit man page has wrong path for the script


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-1
changelog:
  - Rebase to nss-3.15.2
  - Resolves: rhbz#1012656 - pick up NSS 3.15.2 to fix CVE-2013-1739 and disable MD5 in OCSP/CRL


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-2
changelog:
  - Add description of the certutil's --email option to it's manpage
  - Resolves: rhbz#Bug 948495 - Man page scan results for nss


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-4
changelog:
  - Enable fips when system is in fips mode
  - Resolves: rhbz#852023 - FIPS mode detection does not work


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-6
changelog:
  - Fix errors in ssl disabling patches for both library and tests
  - Add s390x to the multilib_arches definition used for alt_ckbi
  - Resolves: rhbz#1001841 - Disable SSL2 and the export cipher suites


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-7
changelog:
  - Fix bash syntax error in patch for disabling ssl2 tests
  - Resolves: rhbz#1001841 - Disable SSL2 and the export cipher suites


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-8
changelog:
  - Fix patch for disabling ssl2 in ssl to correctly set error code
  - Fix syntax error reported in the build.log even tough it succeeds
  - Add patch top ignore setpolicy result 
  - Resolves: rhbz#1001841 - Disable SSL2 and the export cipher suites
  - Resolves: rhbz#1026677 - Attempt to run ipa-client-install fails


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-9
changelog:
  - Fix certutil man page options names to be consistent with help
  - Resolves: rhbz#948495 - man page scan results for nss
  - Remove incorrect count argument in status description in nss-sysinit man page
  - Resolves: rhbz#982723 - man page of nss-sysinit incorrect option descriptions


author: Elio Maldonado <emaldona@redhat.com> - 3.15.2-10
changelog:
  - Fix path to script and remove -- from some options in nss-sysinit man page
  - Resolves: rhbz#982723 - man page of nss-sysinit worong path and other flaws


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-2
changelog:
  - Revoke trust in one mis-issued anssi certificate
  - Resolves: Bug 1040284 - nss: Mis-issued ANSSI/DCSSI certificate (MFSA 2013-117) [rhel-7.0]


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-4
changelog:
  - Improve pluggable ECC support for ECDSA
  - Resolves: Bug 752980 - [7.0 FEAT] Support ECDSA algorithm in the nss package


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-6
changelog:
  - Fix a coverity scan compile time warning for the pem module
  - Resolves: Bug 1002271 - NSS pem module should not require unique base file names


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-7
changelog:
  - Move several nss-sysinit manpages tar archives to the %files
  - Resolves: Bug 1050163 - Same files in two packages create rpm conflict


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-8
changelog:
  - Fix the spec file to apply the nss ecc list patch for bug 752980
  - Resolves: Bug 752980 - Support ECDSA algorithm in the nss package via puggable ecc


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-9
changelog:
  - Rebase to nss-3.15.4
  - Resolves: Bug 1054457 - CVE-2013-1740 nss: false start PR_Recv information disclosure security issue
  - Remove no longer needed patches for manpages that were applied upstream
  - Remove no longer needed patch to disable ocsp stapling tests
  - Update iquote.patch on account of upstream changes
  - Update and rename patch to pem/rsawrapr.c on account of upstream changes
  - Use the pristine upstream sources for nss without repackaging
  - Avoid unneeded manual step which may introduce errors


author: Elio Maldonado <emaldona@redhat.com> - 3.15.4-3
changelog:
  - Remove spurious man5 wildcard entry as all manpages are listed by name
  - Resolves: Bug 1050163 - Same files in two packages create rpm conflict


author: Elio Maldonado <emaldona@redhat.com> - 3.15.4-4
changelog:
  - Update pem sources to latest from nss-pem upstream
  - Pick up pem module fixes verified on RHEL and applied upstream
  - Remove no loger needed pem patches on acccount on this update
  - Add comments documenting the iquote.patch 
  - Resolves: Bug 1054457 - CVE-2013-1740


author: Elio Maldonado <emaldona@redhat.com> - 3.15.4-5
changelog:
  - Pick up a fix from rhel-6 and fix an rpm conflict
  - Don't hold issuer cert handles in crl cache
  - Resolves: Bug 1034409 - deadlock in trust domain and object lock
  - Move nss shared db files to the main package
  - Resolves: Bug 1050163 - Same files in two packages create rpm conflict


author: Elio Maldonado <emaldona@redhat.com> - 3.15.4-6
changelog:
  - Disallow disabling the internal module
  - Resolves: Bug 1056036 - nss segfaults with opencryptoki module


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2-1
changelog:
  - Rebase to nss-3.16.2
  - Resolves: Bug 1103252 - Rebase RHEL 7.1 to at least NSS 3.16.1 (FF 31)
  - Fix test failure detection in the %check section
  - Move removal of unwanted source directories to the end of the %prep section
  - Update various patches on account of the rebase
  - Remove unused patches rendered obsolete by the rebase


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2-2
changelog:
  - Fix libssl and test patches that disable ssl2 support
  - Resolves: Bug 1123435
  - Replace expired PayPal test certificate with current one


author: Elio Maldonado <pbrobinson@redhat.com> 3.16.2-3
changelog:
  - Generic 32/64 bit platform detection (fix ppc64le build)
  - Resolves: Bug 1125619 - nss fails to build on arch: ppc64le (missing dependencies)
  - Fix contributed by Peter Robinson <pbrobinson@redhat.com>


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2-10
changelog:
  - Resolves: Bug 1158161 - Upgrade to NSS 3.16.2.3 for Firefox 31.3
  - Support TLS_FALLBACK_SCSV in tstclnt and ssltap


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Restore patch for certutil man page
  - supply missing options descriptions
  - Resolves: Bug 1158161 - Upgrade to NSS 3.16.2.3 for Firefox 31.3


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-4
changelog:
  - Fix race condition
  - Resolves: Bug 1094468 - 389-ds-base server reported crash in stan_GetCERTCertificate
  - under the replication replay failure condition


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-5
changelog:
  - Reverse the sense of a test in patch to fix pk12util segfault
  - Resolves: Bug 1174527 - Segfault in pk12util when using -l option with certain .p12 files


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-2
changelog:
  - Replace expired PayPal test certificate that breaks the build
  - Resolves: Bug 1200898 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL7.1]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-3
changelog:
  - Fix shell syntax error on nss/tests/all.sh
  - Resolves: Bug 1200898 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL7.1]


author: Elio Maldonado <emaldona@redhat.com> - 3.18.0-4
changelog:
  - Update and reeneable nss-646045.patch on account of the rebase
  - Resolves: Bug 1200898 - Rebase nss to 3.18 for Firefox 38 ESR [RHEL7.1]


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-4
changelog:
  - Add support for sha384 tls cipher suites
  - Add support for server-side hde key exchange
  - Add support for DSS+SHA256 ciphersuites


author: Kai Engert <kaie@redhat.com> - 3.19.1-5
changelog:
  - Incremental patches to fix SSL/TLS test suite execution,
    fix the earlier SHA384 patch, and inform clients to use SHA384 with
    certificate_verify if required by NSS.


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-9
changelog:
  - Fix checks to skip ssl2/export cipher suites tests to not skip needed tests
  - Fix libssl ssl2/export disabling patch to handle NULL cipher cases
  - Enable additional cipher suites by default


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-12
changelog:
  - Support TLS > 1.0 by support while still allowing to connect to SSL3 only servers
  - Enable ECDSA cipher suites by default, a subset of the ones requested


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-13
changelog:
  - Reorder the cipher suites and enable two more by default
  - Fix some of the ssauth sni and ocsp stapling tests


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-14
changelog:
  - Update the required_softokn_build_version to -14
  - Add references to bugs filed upstream for new patches
  - Merge ocsp stapling and sslauth sni tests patches into one


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-16
changelog:
  - Fix check for public key size of DSA certificates
  - Use size of prime P not the size of dsa.publicValue


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-17
changelog:
  - Change the required_softokn_build_version back to -13
  - Ensure we use nss-softokn-3.16.2.3-13.el7_1


author: Elio Maldonado <emaldona@redhat.com> - 3.19.1-19
changelog:
  - Prevent TLS 1.2 Transcript Collision attacks against MD5 in key exchange protocol
  - Resolves: Bug 1289883


author: Dennis Gilmore <dennis@ausil.us> 3.12.3.99.3-10
changelog:
  - dont include the headers in nss-util only in the -devel package
  - nss-util-devel Requires nss-devel since its only providing a subset of the headers.


author: Elio Maldonado<emaldona@redhat.com> - 3.12.3.99.3-11
changelog:
  - Remove spurious executable permissions from nss-util-config
  - Shorten some descriptions to keep rpmlint happy


author: Elio Maldonado<emaldona@redhat.com> - 3.12.4-3
changelog:
  - Remove symbolic links to shared libraries from devel - 521155
  - Apply nss-nolocalsql patch subset for nss-util
  - No rpath-link in nss-util-config


author: Elio Maldonado <emaldona@redhat.com> - 3.13.4-0.1.beta.1
changelog:
  - Update to NSS_3_13_4_BETA1
  - Improve steps to splitting off util from the nss
  - Add executable attribute to the splitting script


author: Elio Maldonado <emaldona@redhat.com> - 3.13.4-2
changelog:
  - Resolves: Bug 805716 - Library needs partial RELRO support added
  - Patch coreconf/Linux.mk as done on RHEL 6.2


author: Elio Maldonado <emaldona@redhat.com> - 3.15.beta1-0.1.beta.1
changelog:
  - Update to NSS_3_15_BETA1
  - Update spec file, patches, and helper scripts on account of a shallower source tree


author: Elio Maldonado <emaldona@redhat.com> - 3.15-0.1.beta1.2
changelog:
  - Don't include prtypes.h from hasht.t
  - Resolves: rhbz#953277 - rawhide build of glibc fails due to fatal error from nss3/hasht.h


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-3
changelog:
  - Add the nss-util portion of a fix for a bug in nss and nss-util
  - Resolves: Bug 752980 - Support ECDSA via pluggable ECC in the nss package


author: Elio Maldonado <emaldona@redhat.com> - 3.15.3-4
changelog:
  - Update to nss-3.15.4
  - Modified the nss-split-util script to use the nss upstream pristine sources
  - Resolves: Bug 1054457 - CVE-2013-1740 nss: false start PR_Recv information disclosure security issue [rhel-7.0]


author: Peter Robinson <pbrobinson@redhat.com> 3.16.2-2
changelog:
  - Generic 32/64 bit platform detection (fix ppc64le build)
  - Resolves: Bug 1126244 - Ensure nss-util is built for 64 bit on ppc64le
  - Fix contributed by Peter Robinson <pbrobinson@redhat.com>


author: Elio Maldonado <emaldona@redhat.com> - 3.16.2.3-2
changelog:
  - Bump the release number to be higher than the one for rhel-7.0
  - Resolves: Bug 1158161 - Upgrade to NSS 3.16.2.3 for Firefox 31.3


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - comment out default values for keys, warn about starting with -A (#19316).
  - take out -A from ntpd startup as well.
  - update to 4.0.99k.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - allow comments in %{_sysconfdir}/ntp/step-tickers file (#28786).
  - need patch0 (glibc patch) on ia64 too


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - require/buildprereq libcap/libcap-devel
  - use 'ntp' user, tune the pre/post scripts, %files
  - add $OPTIONS to the init script


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Add the remote root exploit patch (based on ntp-hackers).
  - Enhance droproot patch (more documentation, etc.) <Jarno.Huuskonen@uku.fi>
  - Tweak the droproot patch to include sys/prctl.h, not linux/prctl.h
  (implicit declarations)
  - Remote groupdel commands, shouldn't be needed.
  - Removed -Wcast-qual and -Wconversion due to excessive warnings (hackish).
  - Make ntp compilable with both glibc 2.1 and 2.2.x (very dirty hack)
  - Add %{_sysconfdir}/sysconfig/ntpd which drops root privs by default


author: Harald Hoyer <harald@redhat.de>
changelog:
  - new snapshot
  - removed typos and security patch (already there)
  - commented multicastclient in config file


author: Harald Hoyer <harald@redhat.de> 4.1.0-1
changelog:
  - wow, how stupid can a man be ;).. fixed #50698 
  - updated to 4.1.0 (changes are small and in non-critical regions)


author: Harald Hoyer <harald@redhat.de> 4.1.0b-4
changelog:
  - created drift with dummy value #58294
  - grep for timeservers in ntp.conf also for ntpdate #57837
  - check return value of ntpdate #58836


author: Harald Hoyer <harald@redhat.de> 4.1.1b-1
changelog:
  - updated to version 4.1.1b
  - improved initscript - use ntpdate on -x
  - improved initscript - open firewall only for timeservers
  - ntp-4.1.1a-adjtime.patch removed (already in source)
  - ntp-4.1.1a-mfp.patch removed (already in source)
  - ntp-4.0.99j-vsnprintf.patch removed (already in source)


author: Harald Hoyer <harald@redhat.com> - 4.2.0.a.20040617-4
changelog:
  - removed firewall hole punching from the initscript; rely on iptables
    ESTABLISHED,RELATED or manual firewall configuration


author: Jindrich Novy <jnovy@redhat.com> 4.2.0.a.20050816-1
changelog:
  - update to the latest stable 4.2.0.a.20050816
  - drop upstreamed .gcc4, .vsnprintf patches
  - remove obsolete .autofoo patch
  - make patch numbering less chaotic
  - don't package backup for .droproot patch


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-2
changelog:
  - Fix fails on upgrade, if ntpd is disabled (#166773)
  - A cosmetic patch. There are some comments and braces '{' '}' added.
  - One unprintable character was converted to octal-form .
  - It can be removed anytime (conversion of the cvs-projets for C-Frame 121,
  - (auto-debug, auto-trace for cfr-printnet server).


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-3
changelog:
  - A similar patch as ntp-4.0.99j-vsnprintf.patch in FEDORA CORE 4
  - (current patch is ntp-stable-4.2.0a-20050816-vsnprintf.patch)


author: Petr Raszyk <praszyk@redhat.com> 4.2.0.a.20050816-10
changelog:
  - ntpd does not submit his local clock (if there is no peer).
    ntpdate->ntpd #163862 , Patch13: ntp-stable-4.2.0a-20050816-loconly.patch


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-11
changelog:
  - update man pages (#153195, #162856)
  - drop C-Frame-121, vsnprintf, minusTi and loconly patch
  - prevent segfault when loopback interface is not configured (#159056)
  - spec cleanup


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-12
changelog:
  - fix initscript:
    - replace -U with -u in getopts (#187003)
    - don't pass group to ntpdate -U argument and ignore -i in options (#142926)
    - set ntpconf for -c
    - remove -p 8 from ntpdate arguments
    - don't call ntpdate when step-tickers doesn't contain anything useful
      and -x isn't in options
  - fix default keyfile for ntpdate (#183196)


author: Miroslav Lichvar <mlichvar@redhat.com> - 4.2.0.a.20050816-14
changelog:
  - modify ntp.conf, change default restrict, remove broadcastdelay,
    use fedora.pool.ntp.org (#189667)
  - don't install drift file
  - remove unsupported options from ntptrace manpage (#137717)
  - fix default paths in manpages for ntp-keygen and ntpdate


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2-3
changelog:
  - fix manycast support in ntpdate (#194329)
  - reply to manycast requests with null refid
  - enable mlockall (#195617)
  - correct threshold value in ntpdate manpage


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.2p4-1
changelog:
  - update to 4.2.2p4
  - fix buffer overflow in WWV Audio driver (#216309)
  - don't mark init script as config


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-1
changelog:
  - update to 4.2.4 (#146884)
  - don't use local clock in default config
  - autogenerate man pages from HTML
  - clean up spec a bit


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-3
changelog:
  - disable autoopts option preset mechanisms for ntpd
  - document -I option of ntpd
  - generate makewhatis friendly man pages


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4-4
changelog:
  - don't wake up every second (#204748)
  - add option to enable memory locking (#195617)
  - fix broadcast client
  - use option values in ntp-keygen
  - improve man pages


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p0-1
changelog:
  - update to 4.2.4p0
  - fix init script
    - don't add second -g to ntpd options (#228424)
    - update getopts
    - skip all refclocks when parsing ntp.conf
  - spec cleanup


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p0-3
changelog:
  - fix interface updates with -I or -L option (#240254)
  - accept multiple -I options
  - fix broadcast client/server to accept/allow sending
    broadcasts on 255.255.255.255 (#226958)
  - fix return codes in init script (#240120)
  - exit with nonzero code if ntpd -q did not set clock (#240134)
  - drop revert452 patch, fixed in kernel 2.6.19
  - make with _smp_mflags


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p2-2
changelog:
  - ignore tentative addresses (#246297)
  - improve init script (#247003)
  - fix sleep patch
  - ease Autokey setup (#139673)
    - change default keysdir to /etc/ntp/crypto
    - set crypto password in /etc/ntp/crypto/pw
    - don't use randfile if /dev/urandom is used by OpenSSL
  - change default statsdir to /var/log/ntpstats/, use statistics type
    as default filename
  - package more doc files


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p2-5
changelog:
  - avoid use of uninitialized floating-point values in clock_select
  - update license tag (Tom "spot" Callaway)
  - drop sntp, MSNTP license is non-free


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-1
changelog:
  - update to 4.2.4p4
  - fix default NTP version for outgoing packets in ntpdate man page
    (#245408)
  - replace BSD with advertising code in ntpdc and ntpq


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-4
changelog:
  - reset kernel frequency when -x option is used
  - create separate init script for ntpdate
  - add note about paths and exit codes to ntpd man page


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-5
changelog:
  - fix building IPv6 support with new glibc-headers (#436713)
  - avoid unaligned memory access (#435301)
  - fix receiving broadcasts on 255.255.255.255


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p4-7
changelog:
  - reload resolv.conf after temporary failure in name resolution (#456743)
  - use clock_gettime
  - make subpackages for perl scripts and ntpdate (#452097, #456116)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p5-2
changelog:
  - retry failed name resolution few times before giving up (#460561)
  - don't write drift file upon exit
  - run ntpq with full path in ntp-wait script


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p6-1
changelog:
  - update to 4.2.4p6 (CVE-2009-0021)
  - include dhclient script (David Cantrell)
  - convert COPYRIGHT to UTF-8


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p6-4
changelog:
  - don't restart ntpd in dhclient script with every renewal
  - fix buffer overflow in ntpq (#490617)
  - check status in condrestart (#481261)
  - don't crash when compiled with HAVE_TIMER_CREATE (#486217)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-1
changelog:
  - update to 4.2.4p7 (CVE-2009-1252)
  - improve PLL response when kernel discipline is disabled
  - don't log STA_MODE changes
  - enable nanokernel support
  - allow minpoll 3
  - increase memlock limit
  - move html documentation to -doc subpackage (#492444)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-2
changelog:
  - fix frequency calculation when starting with no drift file
  - reduce phase adjustments beyond Allan intercept in daemon PLL


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.4p7-3
changelog:
  - handle system time jumps better
  - don't wake up every second for refclocks without timer
  - don't crash in ntpstat when unknown clock type is received (#505564)
  - make ntpstat process first packet in multipacket response
  - switch to editline
  - set pool.ntp.org vendor zone in spec (#512711)
  - compile with -fno-strict-aliasing


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p1-0.1.rc5
changelog:
  - update to 4.2.6p1-RC5
  - support NTPSERVERARGS variable in dhclient script (#558110)
  - don't use deprecated egrep (#548182)
  - don't verify ntp.conf (#481151)
  - compile with PPS API support
  - include new sntp


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p1-2
changelog:
  - update ntpstat to use current system variable names (#588067)
  - print synchronization distance instead of dispersion in ntpstat
  - clarify ntpd -q description


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p2-2
changelog:
  - add support for systemd (#617328)
  - retry few times in ntpdate init script before giving up (#445229)
  - add fourth pool server to default ntp.conf and use iburst


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p2-5
changelog:
  - remove systemctl dependency for now
  - suppress chkconfig output in %post (#629285)
  - generate ntp_decode(5) man page (#632300)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p3-0.1.rc10
changelog:
  - update to 4.2.6p3-RC10
  - fix system peer unmarking when unreachable
  - fix broadcastdelay option
  - fix automatic broadcast delay calibration
  - fix ntp-keygen -V crash
  - avoid unnecessary timeout in ntpdate
  - drop nano patch
  - convert ChangeLog to UTF-8


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p3-3
changelog:
  - pull in time-sync.target from ntpdate.service (Lennart Poettering)
  - link with -Wl,-z,relro,-z,now options
  - fix typo in ntpq man page (#664525)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-2
changelog:
  - update service file for systemd-timedated-ntp target (#816495)
  - allow service to set realtime scheduler (#810801)
  - drop comment enabling local driver in default config


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-4
changelog:
  - start ntpdate service after nss-lookup.target (#837486)
  - update systemd-timedated integration (#846077)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-5
changelog:
  - fix crash in FIPS mode (#839280)
  - use systemd macros if available (#850235)
  - remove obsolete macros


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-6
changelog:
  - bind broadcast client to new interfaces (#722690)
  - decode hex encoded passwords in ntpq/ntpdc
  - remove sample MD5 keys from default keys config


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-7
changelog:
  - allow selection of cipher for private key files
  - set identity modulus size in ntp-keygen
  - create sntp subpackage
  - add sntp service
  - use system libopts
  - add Wants=ntp-wait.service to ntpd service
  - don't fail when /etc/sysconfig/ntpd is missing
  - modify mlock and multiopts patches to use autogen
  - make perl subpackage noarch


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-11
changelog:
  - avoid rereading /etc/services (#768804)
  - remove ntp-wait dependency from ntpd service (#906753)
  - add missing and remove unrecognized options in documentation
  - update comments in some config files


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-12
changelog:
  - workaround failing autogen
  - move files from /lib
  - don't own ntp-units.d directory
  - drop old systemd scriptlets
  - fix dates in changelog


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-13
changelog:
  - ignore duplicate servers from dhclient
  - don't use -Wstrict-overflow with -fno-strict-overflow
  - buildrequire systemd-units
  - remove pie test


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-16
changelog:
  - refresh peers on routing updates (#1048132)
  - fix calculation of root dispersion (#1045377)
  - remove unnecessary IPv6 restrict line from default ntp.conf (#1048255)
  - remove kod from default restrict in ntp.conf (#1048255)
  - update logconfig documentation for patched default (#1048252)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-19
changelog:
  - don't generate weak control key for resolver (CVE-2014-9293)
  - don't generate weak MD5 keys in ntp-keygen (CVE-2014-9294)
  - fix buffer overflows via specially-crafted packets (CVE-2014-9295)
  - don't mobilize passive association when authentication fails (CVE-2014-9296)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-20
changelog:
  - validate lengths of values in extension fields (CVE-2014-9297)
  - drop packets with spoofed source address ::1 (CVE-2014-9298)
  - reject packets without MAC when authentication is enabled (CVE-2015-1798)
  - protect symmetric associations with symmetric key against DoS attack (CVE-2015-1799)
  - fix generation of MD5 keys with ntp-keygen on big-endian systems (CVE-2015-3405)
  - add option to set Differentiated Services Code Point (DSCP) (#1202828)
  - add nanosecond support to SHM refclock (#1117702)
  - allow creating all SHM segments with owner-only access (#1122012)
  - allow different thresholds for forward and backward step (#1193154)
  - allow symmetric keys up to 32 bytes again (#1191111)
  - don't step clock for leap second with -x option (#1191122)
  - don't drop packets with source port below 123 (#1171640)
  - retry joining multicast groups (#1207014)
  - increase memlock limit again (#1053569)
  - warn when monitor can't be disabled due to limited restrict (#1191108)
  - use larger RSA exponent in ntp-keygen (#1191116)
  - fix crash in ntpq mreadvar command (#1180721)
  - move sntp kod database to allow SELinux labeling (#1082934)
  - fix typos in ntpd man page (#1195211)
  - improve documentation of restrict command (#1213953)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2.6p5-22
changelog:
  - check origin timestamp before accepting KoD RATE packet (CVE-2015-7704)
  - allow only one step larger than panic threshold with -g (CVE-2015-5300)


author: Ade Lee <alee@redhat.com> 1.0.0-14
changelog:
  - Resolves: #643546 - [RFE] Add nuxwdog to RHEL.
  - Remove old encryption scheme
  - Store passwords in kernel keyring


author: Ade Lee <alee@redhat.com> - 1.0.1-10
changelog:
  - Resolves: rhbz#1117072 -  ppc64le is missing from ExcludeArch
  - reverted the previous change.  ppc64le now removed from ExcludeArch


author: Ade Lee <alee@redhat.com> 1.0.2-1
changelog:
  - Allow passwords to be retrieved post-init phase
  - Fix null termination issue on returned stored passwords


author: Michal Schmidt <mschmidt@redhat.com> - 2.2.8-4
changelog:
  - Return support for crypto hw on s390.
  - Renamed to opencryptoki.
  - Simplified multilib by putting libs in subpackage as suggested by Dan Horák.


author: Dan Horák <dan[at]danny.cz> - 2.4.1-1
changelog:
  - new upstream release 2.4.1
  - convert from initscript to systemd unit
  - import fixes from RHEL-6 about root's group membership (#732756, #730903)


author: Dan Horák <dan[at]danny.cz> - 2.4.2-3
changelog:
  - add virtual opencryptoki(token) Provides to token modules and as Requires
    to main package (#904986)


author: Dan Horák <dan[at]danny.cz> - 3.0-8
changelog:
  - include token specific directories (#1013017, #1045775, #1054442)
  - fix pkcsconf crash for non-root users (#1054661)
  - the libs subpackage must care of creating the pkcs11 group, it's the first to be installed
  - fix build with -Werror=format-security (#1037228)
  - Resolves: #1054442, #1054661


author: Petr Lautrbach <plautrba@redhat.com> 3.2-3
changelog:
  - Correctly declare OAEP parameter in RSA Wrap tests to prevent a possible
    scope issue (#1088512)
  - several fixes for pkcsep11_migrate


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Patch to build with neither RSA nor RSAref.
  - Miscellaneous FHS-compliance tweaks.
  - Fix for possibly-compressed man pages.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Move condrestart to server postun.
  - Move key generation to init script.
  - Actually use the right patch for moving the key generation to the init script.
  - Clean up the init script a bit.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to 2.1.1p4, which includes fixes for config file parsing problems.
  - Move the init script back.
  - Add Damien's quick fix for wackiness.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to 20000823 snapshot.
  - Change subpackage requirements from %{version} to %{version}-%{release}
  - Back out the pipe patch.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update x11-askpass to 1.0.2. (#17835)
  - Add BuildPreReqs for /bin/login and /usr/bin/rsh so that configure will
    always find them in the right place. (#17909)
  - Set the default path to be the same as the one supplied by /bin/login, but
    add /usr/X11R6/bin. (#17909)
  - Try to handle obsoletion of ssh-server more cleanly.  Package names
    are different, but init script name isn't. (#17865)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Add BuildPreReq on /usr/include/security/pam_appl.h to be sure we always
    build PAM authentication in.
  - Try setting SSH_ASKPASS if gnome-ssh-askpass is installed.
  - Clean out no-longer-used patches.
  - Patch ssh-add to try to add both identity and id_dsa, and to error only
    when neither exists.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to OpenSSH 2.3.0p1.
  - Update to x11-askpass 1.1.0.
  - Enable keyboard-interactive authentication.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Resync with conditional options in Damien Miller's .spec file for an errata.
  - Change libexecdir from %{_libexecdir}/ssh to %{_libexecdir}/openssh.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Add the primes file from the latest snapshot to the main package (#20884).
  - Add the dev package to the prereq list (#19984).
  - Remove the default path and mimic login's behavior in the server itself.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Disable the built-in MD5 password support.  We're using PAM.
  - Take a crack at doing keyboard-interactive authentication with PAM, and
    enable use of it in the default client configuration so that the client
    will try it when the server disallows password authentication.
  - Build with debugging flags.  Build root policies strip all binaries anyway.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Merge multiple PAM text messages into subsequent prompts when possible when
    doing keyboard-interactive authentication.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update to x11-askpass 1.1.1. (#21301)
  - Don't second-guess fixpaths, which causes paths to get fixed twice. (#21290)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Don't treat pam_setcred() failure as fatal unless pam_authenticate() has
    succeeded, to allow public-key authentication after a failure with "none"
    authentication.  (#21268)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - More gettextizing.
  - Close all files after going into daemon mode (needs more testing).
  - Extract patch from CVS to handle auth banners (in the client).
  - Extract patch from CVS to handle compat weirdness.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Don't open a PAM session until we've forked and become the user (#25690).
  - Apply Andrew Bartlett's patch for letting pam_authenticate() know which
    host the user is attempting a login from.
  - Resync with parts of Damien Miller's openssh.spec from CVS.
  - Don't expose KbdInt responses in debug messages (from CVS).
  - Detect and handle errors in rsa_{public,private}_decrypt (from CVS).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update for 2.5.0p1.
  - Use $RPM_OPT_FLAGS instead of -O when building gnome-ssh-askpass
  - Resync with parts of Damien Miller's openssh.spec from CVS, including
    update of x11 askpass to 1.2.0.
  - Only require openssl (don't prereq) because we generate keys in the init
    script now.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Update for 2.5.1p1.
  - Add init script mods from Pekka Savola.
  - Tweak the init script to match the CVS contrib script more closely.
  - Redo patch to ssh-add to try to adding both identity and id_dsa to also try
    adding id_rsa.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Redo patch to move pam_open_session after the server setuid()s to the user.
  - Rework the nopam patch to use be picked up by autoconf.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Chuck the closing patch.
  - Add a trigger to add host keys for protocol 2 to the config file, now that
    configuration file syntax requires us to specify it with HostKey if we
    specify any other HostKey values, which we do.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Revert the patch to move pam_open_session.
  - Init script and spec file changes from Pekka Savola. (#28750)
  - Patch sftp to recognize '-o protocol' arguments. (#29540)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.5.2p1 (includes endianness fixes in the rijndael implementation)
  - don't enable challenge-response by default until we find a way to not
    have too many userauth requests (we may make up to six pubkey and up to
    three password attempts as it is)
  - remove build dependency on rsh to match openssh.com's packages more closely


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.5.2p2
  - call setcred() again after initgroups, because the "creds" could actually
    be group memberships


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make do_pam_setcred() smart enough to know when to establish creds and
    when to reinitialize them
  - add in a couple of other fixes from Damien for inclusion in the errata


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - mention that challengereponse supports PAM, so disabling password doesn't
    limit users to pubkey and rsa auth (#34378)
  - bypass the daemon() function in the init script and call initlog directly,
    because daemon() won't start a daemon it detects is already running (like
    open connections)
  - require the version of openssl we had when we were built


author: Preston Brown <pbrown@redhat.com>
changelog:
  - remove explicit openssl requirement, fixes builddistro issue
  - make initscript stop() function wait until sshd really dead to avoid 
    races in condrestart


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - finish marking strings in the init script for translation
  - modify init script to source /etc/sysconfig/sshd and pass $OPTIONS to sshd
    at startup (change merged from openssh.com init script, originally by
    Pekka Savola)
  - refuse to do X11 forwarding if xauth isn't there, handy if you enable
    it by default on a system that doesn't have X installed


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add in Simon Wilkinson's GSSAPI patch to give it some testing in-house,
    to be removed before the next beta cycle because it's a big departure
    from the upstream version


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix an error parsing the new default sshd_config
  - add a fix from Markus Friedl (via openssh-unix-dev) for ssh-keygen not
    dealing with comments right


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - change Copyright: BSD to License: BSD
  - add Markus Friedl's unverified patch for the cookie file deletion problem
    so that we can verify it
  - drop patch to check if xauth is present (was folded into cookie patch)
  - don't apply gssapi patches for the errata candidate
  - clear supplemental groups list at startup


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - pull cvs patch to add session initialization to no-pty sessions
  - pull cvs patch to not cut off challengeresponse auth needlessly
  - refuse to do X11 forwarding if xauth isn't there, handy if you enable
    it by default on a system that doesn't have X installed (#49263)


author: Nalin Dahyabhai <nalin@redhat.com> 2.9p2-7
changelog:
  - fix scp's server's reporting of file sizes, and build with the proper
    preprocessor define to get large-file capable open(), stat(), etc.
    (sftp has been doing this correctly all along) (#51827)
  - configure without --with-ipv4-default on RHL 7.x and newer (#45987,#52247)
  - pull cvs patch to fix support for /etc/nologin for non-PAM logins (#47298)
  - mark profile.d scriptlets as config files (#42337)
  - refer to Jason Stone's mail for zsh workaround for exit-hanging quasi-bug
  - change a couple of log() statements to debug() statements (#50751)
  - pull cvs patch to add -t flag to sshd (#28611)
  - clear fd_sets correctly (one bit per FD, not one byte per FD) (#43221)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 3.0p1
  - update to x11-ssh-askpass 1.2.4.1
  - change build dependency on a file from pam-devel to the pam-devel package
  - replace primes with moduli


author: Nalin Dahyabhai <nalin@redhat.com> 3.0p1-1
changelog:
  - merge some of Damien Miller <djm@mindrot.org> changes from the upstream
    3.0p1 spec file and init script


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.2p1-3
changelog:
  - add patches from Simon Wilkinson and Nicolas Williams for GSSAPI key
    exchange, authentication, and named key support


author: Nalin Dahyabhai <nalin@redhat.com> SNAP-20020220
changelog:
  - update to SNAP-20020220 for testing purposes (you've been warned, if there's
    anything to be warned about, gss patches won't apply, I don't mind)


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-1
changelog:
  - require sharutils for building (mindrot #137)
  - require db1-devel only when building for 6.x (#55105), which probably won't
    work anyway (3.1 requires OpenSSL 0.9.6 to build), but what the heck
  - require pam-devel by file (not by package name) again
  - add Markus's patch to compile with OpenSSL 0.9.5a (from
    http://bugzilla.mindrot.org/show_bug.cgi?id=141) and apply it if we're
    building for 6.x


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-2gss
changelog:
  - reintroduce Simon's gssapi patches
  - add buildprereq for autoconf253, which is needed to regenerate configure
    after applying the gssapi patches
  - refresh to the latest version of Markus's patch to build properly with
    older versions of OpenSSL


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-3
changelog:
  - pull patch from CVS to avoid printing error messages when some of the
    default keys aren't available when running ssh-add
  - refresh to current revisions of Simon's patches


author: Nalin Dahyabhai <nalin@redhat.com> 3.1p1-4
changelog:
  - drop buildreq on db1-devel
  - require pam-devel by package name
  - require autoconf instead of autoconf253 again


author: Nalin Dahyabhai <nalin@redhat.com> 3.3p1-1
changelog:
  - update to 3.3p1
  - merge in spec file changes from upstream (remove setuid from ssh, ssh-keysign)
  - disable gtk2 askpass
  - require pam-devel by filename rather than by package for erratum
  - include patch from Solar Designer to work around anonymous mmap failures


author: Nalin Dahyabhai <nalin@redhat.com> 3.3p1-2
changelog:
  - rework the close-on-exit docs
  - include configuration file man pages
  - make use of nologin as the privsep shell optional


author: Nalin Dahyabhai <nalin@redhat.com> 3.5p1-2
changelog:
  - patch PAM configuration to use relative path names for the modules, allowing
    us to not worry about which arch the modules are built for on multilib systems


author: Nalin Dahyabhai <nalin@redhat.com> 3.5p1-6
changelog:
  - move scp to the -clients subpackage, because it directly depends on ssh
    which is also in -clients (#84329)


author: Nalin Dahyabhai <nalin@redhat.com> 3.6.1p2-6
changelog:
  - modify patch which clears the supplemental group list at startup to only
    complain if setgroups() fails if sshd has euid == 0
  - handle krb5 installed in %{_prefix} or elsewhere by using krb5-config


author: Nalin Dahyabhai <nalin@redhat.com> 3.6.1p2-11
changelog:
  - apply patch to store the correct buffer size in allocated buffers
    (CAN-2003-0693)
  - skip the initial PAM authentication attempt with an empty password if
    empty passwords are not permitted in our configuration (#103998)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - additional fix for apparently-never-happens double-free in buffer_free()
  - extend fix for #103998 to cover SSH1


author: Daniel Walsh <dwalsh@redhat.com> 3.6.1p2-34
changelog:
  * Wed Mar 03 2004 Phil Knirsch <pknirsch@redhat.com> 3.6.1p2-33.30.1
  - Built RHLE3 U2 update package.


author: Nalin Dahyabhai <nalin@redhat.com> 3.8.1p1-1
changelog:
  - request gssapi-with-mic by default but not delegation (flag day for anyone
    who used previous gssapi patches)
  - no longer request x11 forwarding by default


author: Nalin Dahyabhai <nalin@redhat.com> 3.9p1-8
changelog:
  - add a --enable-vendor-patchlevel option which allows a ShowPatchLevel option
    to enable display of a vendor patch level during version exchange (#120285)
  - configure with --disable-strip to build useful debuginfo subpackages


author: Tomas Mraz <tmraz@redhat.com>
changelog:
  - change permissions on pam.d/sshd to 0644 (#64697)
  - patch initscript so it doesn't kill opened sessions if
    the sshd daemon isn't running anymore (#67624)


author: Tomas Mraz <tmraz@redhat.com> 3.9p1-10
changelog:
  - enable trusted forwarding by default if X11 forwarding is 
    required by user (#137685 and duplicates)
  - disable protocol 1 support by default in sshd server config (#88329)
  - keep the gnome-askpass dialog above others (#69131)


author: Tomas Mraz <tmraz@redhat.com> 3.9p1-11
changelog:
  - don't call syslog in signal handler
  - allow password authentication when copying from remote
    to remote machine (#103364)


author: Tomas Mraz <tmraz@redhat.com> 4.0p1-2
changelog:
  - fixed Local/RemoteForward in ssh_config.5 manpage
  - fix fatal when Local/RemoteForward is used and scp run (#153258)
  - don't leak user validity when using krb5 authentication


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-3
changelog:
  - fix small regression caused by the nologin patch (#161956)
  - fix race in getpeername error checking (mindrot #1054)


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-4
changelog:
  - don't deadlock on exit with multiple X forwarded channels (#152432)
  - don't use X11 port which can't be bound on all IP families (#163732)


author: Tomas Mraz <tmraz@redhat.com> 4.1p1-5
changelog:
  - use x11-ssh-askpass if openssh-askpass-gnome is not installed (#165207)
  - install ssh-copy-id from contrib (#88707)


author: Tomas Mraz <tmraz@redhat.com> 4.2p1-2
changelog:
  - use include instead of pam_stack in pam config
  - use fork+exec instead of system in scp - CVE-2006-0225 (#168167)
  - upstream patch for displaying authentication errors


author: Warren Togami <wtogami@redhat.com> - 4.2p1-7
changelog:
  - xorg-x11-devel -> libXt-devel
  - rebuild for new xauth location so X forwarding works
  - buildreq audit-libs-devel
  - buildreq automake for aclocal
  - buildreq imake for xmkmf
  -  -D_GNU_SOURCE in flags in order to get it to build
     Ugly hack to workaround openssh defining __USE_GNU which is
     not allowed and causes problems according to Ulrich Drepper
     fix this the correct way after FC5test1


author: Nalin Dahyabhai <nalin@redhat.com> - 4.2p1-8
changelog:
  - work around missing gccmakedep by wrapping makedepend in a local script
  - remove now-obsolete build dependency on "xauth"


author: Tomas Mraz <tmraz@redhat.com> - 4.2p1-9
changelog:
  - drop x11-ssh-askpass from the package
  - drop old build_6x ifs from spec file
  - improve gnome-ssh-askpass so it doesn't reveal number of passphrase 
    characters to person looking at the display
  - less hackish fix for the __USE_GNU problem


author: Tomas Mraz <tmraz@redhat.com> - 4.3p1-2
changelog:
  - fixed another place where syslog was called in signal handler
  - pass locale environment variables to server, accept them there (#179851)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-3
changelog:
  - enable the subprocess in chroot to send messages to system log
  - sshd should prevent login if audit call fails


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-6
changelog:
  - improve selinux patch (by Jan Kiszka)
  - upstream patch for buffer append space error (#191940)
  - fixed typo in configure.ac (#198986)
  - added pam_keyinit to pam configuration (#198628)
  - improved error message when askpass dialog cannot grab
    keyboard input (#198332)
  - buildrequires xauth instead of xorg-x11-xauth
  - fixed a few rpmlint warnings


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-7
changelog:
  - dropped old ssh obsoletes
  - call the pam_session_open/close from the monitor when privsep is
    enabled so it is always called as root (patch by Darren Tucker)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-8
changelog:
  - drop the pam-session patch from the previous build (#201341)
  - don't set IPV6_V6ONLY sock opt when listening on wildcard addr (#201594)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-9
changelog:
  - don't report duplicate syslog messages, use correct local time (#189158)
  - don't allow spnego as gssapi mechanism (from upstream)
  - fixed memleaks found by Coverity (from upstream)
  - allow ip options except source routing (#202856) (patch by HP)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-10
changelog:
  - improve gssapi-no-spnego patch (#208102)
  - CVE-2006-4924 - prevent DoS on deattack detector (#207957)
  - CVE-2006-5051 - don't call cleanups from signal handler (#208459)


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-11
changelog:
  - merge sshd initscript patches
  - kill all ssh sessions when stop is called in halt or reboot runlevel
  - remove -TERM option from killproc so we don't race on sshd restart


author: Tomas Mraz <tmraz@redhat.com> - 4.3p2-13
changelog:
  - improved pam_session patch so it doesn't regress, the patch is necessary
    for the pam_session_close to be called correctly as uid 0


author: Tomas Mraz <tmraz@redhat.com> - 4.5p1-2
changelog:
  - support mls on labeled networks (#220487)
  - support mls level selection on unlabeled networks
  - allow / in usernames in scp (only beginning /, ./, and ../ is special)


author: Tomas Mraz <tmraz@redhat.com> - 4.5p1-8
changelog:
  - fix sftp client problems on write error (#247802)
  - allow disabling autocreation of server keys (#235466)


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-1
changelog:
  - upgrade to latest upstream
  - use libedit in sftp (#203009)
  - fixed audit log injection problem (CVE-2007-3102)


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-4
changelog:
  - do not copy /etc/localtime into the chroot as it is not
    necessary anymore (#193184)
  - call setkeycreatecon when selinux context is established
  - test for NULL privk when freeing key (#391871) - patch by
    Pierre Ossman


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-9
changelog:
  - set FD_CLOEXEC on client socket
  - apply real fix for window size problem (#286181) from upstream
  - apply fix for the spurious failed bind from upstream
  - apply open handle leak in sftp fix from upstream


author: Tomas Mraz <tmraz@redhat.com> - 4.7p1-10
changelog:
  - fix race on control master and cleanup stale control socket (#436311)
    patches by David Woodhouse


author: Tomas Mraz <tmraz@redhat.com> - 5.0p1-1
changelog:
  - upgrade to new upstream (#441066)
  - prevent initscript from killing itself on halt with upstart (#438449)
  - initscript status should show that the daemon is running
    only when the main daemon is still alive (#430882)


author: Tomas Mraz <tmraz@redhat.com> - 5.0p1-2
changelog:
  - add LANGUAGE to accepted/sent environment variables (#443231)
  - use pam_selinux to obtain the user context instead of doing it itself
  - unbreak server keep alive settings (patch from upstream)
  - small addition to scp manpage


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-1
changelog:
  - upgrade to new upstream release
  - fixed a problem with public key authentication and explicitely
    specified SELinux role


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-4
changelog:
  - set FD_CLOEXEC on channel sockets (#475866)
  - adjust summary
  - adjust nss-keys patch so it is applicable without selinux patches (#470859)


author: Tomas Mraz <tmraz@redhat.com> - 5.1p1-5
changelog:
  - remove obsolete --with-rsh (#478298)
  - add pam_sepermit to allow blocking confined users in permissive mode
    (#471746)
  - move system-auth after pam_selinux in the session stack


author: Jan F. Chadima <jchadima@redhat.com> - 5.2p1-20
changelog:
  - merged xmodifiers to redhat patch
  - merged gssapi-role to selinux patch
  - merged cve-2007_3102 to audit patch
  - sesftp patch only with WITH_SELINUX flag
  - rearange sesftp patch according to upstream request


author: Jan F. Chadima <jchadima@redhat.com> - 5.2p1-28
changelog:
  - Repair initscript to be acord to guidelines (#521860)
  - Add bugzilla# to application of edns and xmodifiers patch


author: Jan F. Chadima <jchadima@redhat.com> - 5.5p1-10 + 0.9.2-26
changelog:
  - Repair the reference in man ssh-ldap-helper(8)
  - Repair the PubkeyAgent section in sshd_config(5)
  - Provide example ldap.conf


author: Jan F. Chadima <jchadima@redhat.com> - 5.6p1-20 + 0.9.2-29
changelog:
  - reapair clientloop crash (#627332)
  - properly restore euid in case connect to the ssh-agent socket fails


author: Jan F. Chadima <jchadima@redhat.com> - 5.8p1-18 + 0.9.2-30
changelog:
  - add periodical reseeding of random generator 
  - change selinux contex for internal sftp in do_usercontext
  - exit(0) after sigterm


author: Jan F. Chadima <jchadima@redhat.com> - 5.8p1-20 + 0.9.2-30
changelog:
  - use /dev/random or /dev/urandom for seeding prng
  - improve periodical reseeding of random generator


author: Jan F. Chadima <jchadima@redhat.com> - 5.8p2-12 + 0.9.2-31
changelog:
  - Systemd compatibility according to Mathieu Bridon <bochecha@fedoraproject.org>
  - Split out the host keygen into their own command, to ease future migration
    to systemd. Compatitbility with the init script was kept.
  - Migrate the package to full native systemd unit files, according to the Fedora
    packaging guidelines.
  - Prepate the unit files for running an ondemand server. (do not add it actually)


author: Tomas Mraz <tmraz@redhat.com> - 5.9p1-11 + 0.9.2-32
changelog:
  - remove unnecessary requires on initscripts
  - set VerifyHostKeyDNS to ask in the default configuration (#739856)


author: Tomas Mraz <tmraz@redhat.com> - 5.9p1-12 + 0.9.2-32
changelog:
  - still support /etc/sysconfig/sshd loading in sshd service (#754732)
  - fix incorrect key permissions generated by sshd-keygen script (#754779)


author: Tomas Mraz <tmraz@redhat.com> - 5.9p1-13 + 0.9.2-32
changelog:
  - add back the restorecon call to ssh-copy-id - it might be needed on older
    distributions (#739989)


author: Petr Lautrbach <plautrba@redhat.com> 5.9p1-18 + 0.9.2-32
changelog:
  - replace TwoFactorAuth with RequiredAuthentications[12]
    https://bugzilla.mindrot.org/show_bug.cgi?id=983


author: Tomas Mraz <tmraz@redhat.com> 5.9p1-23 + 0.9.3-1
changelog:
  - fix segfault in su when pam_ssh_agent_auth is used and the ssh-agent
    is not running, most probably not exploitable
  - update pam_ssh_agent_auth to 0.9.3 upstream version


author: Petr Lautrbach <plautrba@redhat.com> 6.1p1-1 + 0.9.3-3
changelog:
  - new upstream release (#852651)
  - use DIR: kerberos type cache (#848228)
  - don't use chroot_user_t for chrooted users (#830237)
  - replace scriptlets with systemd macros (#850249)
  - don't use /bin and /sbin paths (#856590)


author: Petr Lautrbach <plautrba@redhat.com> 6.1p1-2
changelog:
  - add SELinux comment to /etc/ssh/sshd_config about SELinux command to modify port (#861400)
  - drop required chkconfig (#865498)
  - drop openssh-5.9p1-sftp-chroot.patch (#830237)


author: Petr Lautrbach <plautrba@redhat.com> 6.1p1-3 + 0.9.3-3
changelog:
  - replace RequiredAuthentications2 with AuthenticationMethods based on upstream
  - obsolete RequiredAuthentications[12] options
  - fix openssh-6.1p1-privsep-selinux.patch


author: Petr Lautrbach <plautrba@redhat.com> 6.2p1-2 + 0.9.3-4
changelog:
  - keep track of which IndentityFile options were manually supplied and
    which were default options, and don't warn if the latter are missing.
    (mindrot#2084)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p1-3 + 0.9.3-4
changelog:
  - sshd.service: use KillMode=process (#890376)
  - add latest config.{sub,guess} to support aarch64 (#926284)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-4 + 0.9.3-5
changelog:
  - don't show Success for EAI_SYSTEM (#985964)
  - make sftp's libedit interface marginally multibyte aware (#841771)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-7 + 0.9.3-5
changelog:
  - use hmac_suffix for ssh{,d} hmac checksums
  - bump the minimum value of SSH_USE_STRONG_RNG to 14 according to SP800-131A
  - automatically restart sshd.service on-failure after 42s interval


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-8 + 0.9.3-5
changelog:
  - sshd-keygen: generate only RSA keys by default (#1010361)
  - use dist tag in suffixes for hmac checksum files


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-9 + 0.9.3-5
changelog:
  - use dracut-fips package to determine if a FIPS module is installed (#1001566)
  - revert -fips subpackages and hmac files suffixes


author: Petr Lautrbach <plautrba@redhat.com> 6.3p1-2 + 0.9.3-6
changelog:
  - use default_ccache_name from /etc/krb5.conf for a kerberos cache (#991186)
  - increase the size of the Diffie-Hellman groups (#1010607)
  - sshd-keygen to generate ECDSA keys <i.grok@comcast.net> (#1019222)


author: Petr Lautrbach <plautrba@redhat.com> 6.3p1-4 + 0.9.3-7
changelog:
  - adjust gss kex mechanism to the upstream changes (#1024004)
  - don't use xfree in pam_ssh_agent_auth sources <geertj@gmail.com> (#1024965)


author: Petr Lautrbach <plautrba@redhat.com> 6.4p1-2 + 0.9.3-1
changelog:
  - fix fatal() cleanup in the audit patch (#1029074)
  - fix parsing logic of ldap.conf file (#1033662)


author: Petr Lautrbach <plautrba@redhat.com> 6.4p1-3 + 0.9.3-8
changelog:
  - sshd-keygen - use correct permissions on ecdsa host key (#1023945)
  - use only rsa and ecdsa host keys by default


author: Petr Lautrbach <plautrba@redhat.com> 6.4p1-5 + 0.9.3-8
changelog:
  - use tty allocation for a remote scp (#985650)
  - run ssh-copy-id in the legacy mode when SSH_COPY_ID_LEGACY variable is set (#969375)
  - FIPS mode - adjust the key echange DH groups and ssh-keygen according toSP800-131A (#1001748)


author: Petr Lautrbach <plautrba@redhat.com> 6.4p1-7 + 0.9.3-8
changelog:
  - log fipscheck verification message into syslog authpriv
  - ssh-keygen - relative-specified certificate expiry time should be relative
    to current time and not the validity start time (#1058234)
  - use the size of security of 3des for DH (#1053107)
  - ssh-copy-id.1 man page fix (#1058792)


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-1 + 0.9.3-9
changelog:
  - new upstream release (#1059667)
  - prevent a server from skipping SSHFP lookup - CVE-2014-2653 (#1081338)
  - make /etc/ssh/moduli file public (#1134448)
  - test existence of /etc/ssh/ssh_host_ecdsa_key in sshd-keygen.service
  - don't clean up gssapi credentials by default (#1134447)
  - ssh-agent - try CLOCK_BOOTTIME with fallback (#1134449)
  - disable the curve25519 KEX when speaking to OpenSSH 6.5 or 6.6
  - add support for ED25519 keys to sshd-keygen and sshd.sysconfig
  - standardise on NI_MAXHOST for gethostname() string lengths (#1097665)
  - set a client's address right after a connection is set (mindrot#2257) (#912792)
  - apply RFC3454 stringprep to banners when possible (mindrot#2058) (#1104662)
  - don't consider a partial success as a failure (mindrot#2270) (#1112972)


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-2 + 0.9.3-9
changelog:
  - slightly change systemd units logic - use sshd-keygen.service (#1066615)
  - log when a client requests an interactive session and only sftp is allowed (#1130198)
  - sshd-keygen - don't generate DSA and ED25519 host keys in FIPS mode (#1143867)


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-4 + 0.9.3-9
changelog:
  - revert the default of KerberosUseKuserok back to yes
  - fix kuserok patch which checked for the existence of .k5login unconditionally
    and hence prevented other mechanisms to be used properly


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-8 + 0.9.3-9
changelog:
  - increase size of AUDIT_LOG_SIZE to 256 (#1171163)
  - record pfs= field in CRYPTO_SESSION audit event (#1171248)


author: Petr Lautrbach <plautrba@redhat.com> 6.6.1p1-10 + 0.9.3-9
changelog:
  - add new option GSSAPIEnablek5users and disable using ~/.k5users by default CVE-2014-9278
    (#1169843)


author: Jakub Jelen <jjelen@redhat.com> 6.6.1p1-13 + 0.9.3-9
changelog:
  - Increase limit of files for glob match in sftp (#1160377)
  - Add pam_reauthorize.so to /etc/pam.d/sshd (#1204233)
  - Show all config values in sshd test mode (#1187597)
  - Document required selinux boolean for working ssh-ldap-helper (#1178116)
  - Consistent usage of pam_namespace in sshd (#1125110)
  - Fix auditing when using combination of ForcedCommand and PTY (#1199112)
  - Add sftp option to force mode of created files (#1197989)
  - Ability to specify an arbitrary LDAP filter in ldap.conf for ssh-ldap-helper (#1201753)
  - Provide documentation line for systemd service and socket (#1181591)
  - Provide LDIF version of LPK schema (#1184938)
  - Document TERM environment variable (#1162683)
  - Fix ssh-copy-id on non-sh remote shells (#1201758)
  - Do not read RSA1 hostkeys for HostBased authentication in FIPS (#1197666)


author: Jakub Jelen <jjelen@redhat.com> 6.6.1p1-14 + 0.9.3-9
changelog:
  - Fix ldif schema to have correct spacing on newlines (#1184938)
  - Add missing values for sshd test mode (#1187597)
  - ssh-copy-id: tcsh doesnt work with multiline strings (#1201758)
  - Fix memory problems with newkeys and array transfers (#1223218)
  - Enhance AllowGroups documentation in man page (#1150007)


author: Jakub Jelen <jjelen@redhat.com> 6.6.1p1-15 + 0.9.3-9
changelog:
  - One more typo in manual page documenting TERM variable (#1162683)
  - Fix race condition with auditing messages answers (#1240613)


author: Jakub Jelen <jjelen@redhat.com> 6.6.1p1-17 + 0.9.3-9
changelog:
  - Security fixes released with openssh-6.9 (CVE-2015-5352) (#1247864)
   - XSECURITY restrictions bypass under certain conditions in ssh(1) (#1238231)
   - weakness of agent locking (ssh-add -x) to password guessing (#1238238)


author: Jakub Jelen <jjelen@redhat.com> 6.6.1p1-20 + 0.9.3-9
changelog:
  - Fix vulnerabilities published with openssh-7.0 (#1265807)
   - Privilege separation weakness related to PAM support
   - Use-after-free bug related to PAM support


author: Jakub Jelen <jjelen@redhat.com> 6.6.1p1-23 + 0.9.3-9
changelog:
  - Disable undocumented feauture Roaming for good (#1298218)
  - prevents CVE-2016-0777 and CVE-2016-0778


author: Bernhard Rosenkrdnzer <bero@redhat.de>
changelog:
  - inital packaging
  - changes from base:
    - Move /usr/local/ssl to /usr/share/ssl for FHS compliance
    - handle RPM_OPT_FLAGS


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.5a, modified for U.S.
  - add perl as a build-time requirement
  - move certificate makefile to another package
  - disable RC5, IDEA, RSA support
  - remove optimizations for now


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - byte-compile python extensions without the build-root
  - adjust the makefile to not remove temporary files (like .key files when
    building .csr files) by marking them as .PRECIOUS


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove -Wa,* and -m* compiler flags from the default Configure file (#20656)
  - add the CA.pl man page to the perl subpackage


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - disable some inline assembly, which on x86 is Pentium-specific
  - re-enable MD2 (see http://www.ietf.org/ietf/IPR/RSA-MD-all)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - re-disable MD2 -- the EVP_MD_CTX structure would grow from 100 to 152
    bytes or so, causing EVP_DigestInit() to zero out stack variables in
    apps built against a version of the library without it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.6
  - enable MD2
  - use the libcrypto.so and libssl.so targets to build shared libs with
  - bump the soversion to 1 because we're no longer compatible with any of
    the various 0.9.5a packages circulating around, which provide lib*.so.0


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 0.9.6a
  - use the build-shared target to build shared libraries
  - bump the soversion to 2 because we're no longer compatible with
    our 0.9.5a packages or our 0.9.6 packages
  - drop the patch for making rsatest a no-op when rsa null support is used
  - put all man pages into <section>ssl instead of <section>
  - break the m2crypto modules into a separate package


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a script for creating dummy certificates
  - move man pages from %{_mandir}/man?/foo.?ssl to %{_mandir}/man?ssl/foo.?


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-3
changelog:
  - add patches for AEP hardware support
  - add patch to keep trying when we fail to load a cert from a file and
    there are more in the file
  - add missing prototype for ENGINE_ubsec() in engine_int.h


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-4
changelog:
  - move man pages back to %{_mandir}/man?/foo.?ssl from
    %{_mandir}/man?ssl/foo.?
  - add an [ engine ] section to the default configuration file


author: Gary Benson <gbenson@redhat.com> stronghold-0.9.6c-1
changelog:
  - upgrade to 0.9.6c
  - bump BuildArch to i686 and enable assembler on all platforms
  - synchronise with shrimpy and rawhide
  - bump soversion to 3


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.6b-30
changelog:
  - add configuration stanza for x86_64 and use it on x86_64
  - build for linux-ppc on ppc
  - start running the self-tests again


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7-6
changelog:
  - EVP_DecryptInit should call EVP_CipherInit() instead of EVP_CipherInit_ex(),
    to get the right behavior when passed uninitialized context structures
    (#83766)
  - build with -mcpu=ev5 on alpha family (#83828)


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7-8
changelog:
  - add fix to guard against attempts to allocate negative amounts of memory
  - add patch for CAN-2003-0078, fixing a timing attack


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-5
changelog:
  - add patch to harden against Klima-Pokorny-Rosa extension of Bleichenbacher's
    attack (CAN-2003-0131)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - backport fix for engine-used-for-everything from 0.9.7b
  - backport fix for prng not being seeded causing problems, also from 0.9.7b
  - add a check at build-time to ensure that RSA is thread-safe
  - keep perlpath from stomping on the libica configure scripts


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add security fixes for protocol parsing bugs (CAN-2003-0543, CAN-2003-0544)
    and heap corruption (CAN-2003-0545)
  - update RHNS-CA-CERT files
  - ease back on the number of threads used in the threading test


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-22
changelog:
  - add -Wa,--noexecstack to RPM_OPT_FLAGS so that assembled modules get tagged
    as not needing executable stacks


author: Phil Knirsch <pknirsch@redhat.com> 0.9.7a-24
changelog:
  - Use /dev/urandom instead of PRNG for libica.
  - Apply libica-1.3.5 fix for /dev/urandom in icalinux.c
  - Use latest ICA engine patch from IBM.


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-25
changelog:
  - add dependency on zlib-devel for the -devel package, which depends on zlib
    symbols because we enable zlib for libssl (#102962)


author: Joe Orton <jorton@redhat.com> 0.9.7a-27
changelog:
  - updated ca-bundle.crt: removed expired GeoTrust roots, added
    freessl.com root, removed trustcenter.de Class 0 root


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.7a-33
changelog:
  - add an intermediate <openssl/opensslconf.h> which points to the right
    arch-specific opensslconf.h on multilib arches


author: Tomas Mraz <tmraz@redhat.com> 0.9.7e-1
changelog:
  - new upstream source, updated patches
  - added patch so we are hopefully ABI compatible with upcoming
    0.9.7f


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-1
changelog:
  - reenable optimizations on ppc64 and assembly code on ia64
  - upgrade to new upstream version (no soname bump needed)
  - disable thread test - it was testing the backport of the
    RSA blinding - no longer needed
  - added support for changing serial number to
    Makefile.certificate (#151188)
  - make ca-bundle.crt a config file (#118903)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-2
changelog:
  - add back RC4_CHAR on ia64 and x86_64 so the ABI isn't broken
  - disable broken bignum assembly on x86_64


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-3
changelog:
  - uninitialized variable mustn't be used as input in inline
    assembly
  - reenable the x86_64 assembly again


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-4
changelog:
  - move certificates to _sysconfdir/pki/tls (#143392)
  - move CA directories to _sysconfdir/pki/CA
  - patch the CA script and the default config so it points to the
    CA directories


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-6
changelog:
  - use poll instead of select in rand (#128285)
  - fix Makefile.certificate to point to /etc/pki/tls
  - change the default string mask in ASN1 to PrintableString+UTF8String


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-7
changelog:
  - fix CAN-2005-0109 - use constant time/memory access mod_exp
    so bits of private key aren't leaked by cache eviction (#157631)
  - a few more fixes from upstream 0.9.7g


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-9
changelog:
  - add *.so.soversion as symlinks in /lib (#165264)
  - remove unpackaged symlinks (#159595)
  - fixes from upstream (constant time fixes for DSA,
    bn assembler div on ppc arch, initialize memory on realloc)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-10
changelog:
  - fix CAN-2005-2969 - remove SSL_OP_MSIE_SSLV2_RSA_PADDING which
    disables the countermeasure against man in the middle attack in SSLv2
    (#169863)
  - use sha1 as default for CA and cert requests - CAN-2005-2946 (#169803)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8a-4
changelog:
  - fix build (-lcrypto was erroneusly dropped) of the updated libica
  - updated ICA engine to 1.3.6-rc3


author: Tomas Mraz <tmraz@redhat.com> - 0.9.8a-6
changelog:
  - fix stale open handles in libica (#177155)
  - fix build if 'rand' or 'passwd' in buildroot path (#178782)
  - initialize VIA Padlock engine (#186857)


author: Tomas Mraz <tmraz@redhat.com> - 0.9.8b-1
changelog:
  - upgrade to new version, stays ABI compatible
  - there is no more linux/config.h (it was empty anyway)


author: Tomas Mraz <tmraz@redhat.com>
changelog:
  - add ipv6 support to s_client and s_server (by Jan Pazdziora) (#198737)
  - add patches for BN threadsafety, AES cache collision attack hazard fix and
    pkcs7 code memleak fix from upstream CVS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-7
changelog:
  - fix CVE-2006-2937 - mishandled error on ASN.1 parsing (#207276)
  - fix CVE-2006-2940 - parasitic public keys DoS (#207274)
  - fix CVE-2006-3738 - buffer overflow in SSL_get_shared_ciphers (#206940)
  - fix CVE-2006-4343 - sslv2 client DoS (#206940)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-13
changelog:
  - allow building on ARM architectures (#245417)
  - use reference timestamps to prevent multilib conflicts (#218064)
  - -devel package must require pkgconfig (#241031)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-14
changelog:
  - use localhost in testsuite, hopefully fixes slow build in koji
  - CVE-2007-3108 - fix side channel attack on private keys (#250577)
  - make ssl session cache id matching strict (#233599)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-16
changelog:
  - fix CVE-2007-5135 - off-by-one in SSL_get_shared_ciphers (#309801)
  - fix CVE-2007-4995 - out of order DTLS fragments buffer overflow (#321191)
  - add alpha sub-archs (#296031)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-2
changelog:
  - enable some new crypto algorithms and features
  - add some more important bug fixes from openssl CVS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-3
changelog:
  - set default paths when no explicit paths are set (#418771)
  - do not add tls extensions to client hello for SSLv3 (#422081)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8g-9
changelog:
  - fix CVE-2008-0891 - server name extension crash (#448492)
  - fix CVE-2008-1672 - server key exchange message omit crash (#448495)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-1
changelog:
  - new upstream version with necessary soname bump (#455753)
  - temporarily provide symlink to old soname to make it possible to rebuild
    the dependent packages in rawhide
  - add eap-fast support (#428181)
  - add possibility to disable zlib by setting
  - add fips mode support for testing purposes
  - do not null dereference on some invalid smime files
  - add buildrequires pkgconfig (#479493)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-6
changelog:
  - drop the temporary triggerpostun and symlinking in post
  - fix the pkgconfig files and drop the unnecessary buildrequires
    on pkgconfig as it is a rpmbuild dependency (#481419)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8j-7
changelog:
  - must also verify checksum of libssl.so in the FIPS mode
  - obtain the seed for FIPS rng directly from the kernel device
  - drop the temporary symlinks


author: Tomas Mraz <tmraz@redhat.com> 0.9.8k-1
changelog:
  - update to new upstream release (minor bug fixes, security
    fixes and machine code optimizations only)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8k-6
changelog:
  - abort if selftests failed and random number generator is polled
  - mention EVP_aes and EVP_sha2xx routines in the manpages
  - add README.FIPS
  - make CA dir absolute path (#445344)
  - change default length for RSA key generation to 2048 (#484101)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.11.beta4
changelog:
  - update to new upstream version, no soname bump needed
  - fix CVE-2009-3555 - note that the fix is bypassed if SSL_OP_ALL is used
    so the compatibility with unfixed clients is not broken. The
    protocol extension is also not final.


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.12.beta4
changelog:
  - keep the beta status in version number at 3 so we do not have to rebuild
    openssh and possibly other dependencies with too strict version check


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.13.beta4
changelog:
  - disable enforcement of the renegotiation extension on the client (#537962)
  - add fixes from the current upstream snapshot


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.17.beta4
changelog:
  - upstream fix compression handling on session resumption
  - various null checks and other small fixes from upstream
  - upstream changes for the renegotiation info according to the latest draft


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.19.beta4
changelog:
  - fix CVE-2009-4355 - leak in applications incorrectly calling
    CRYPTO_free_all_ex_data() before application exit (#546707)
  - upstream fix for future TLS protocol version handling


author: Tomas Mraz <tmraz@redhat.com> 1.0.0-0.21.beta5
changelog:
  - gracefully handle zero length in assembler implementations of
    OPENSSL_cleanse (#564029)
  - do not fail in s_server if client hostname not resolvable (#561260)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0c-2
changelog:
  - listen on ipv6 wildcard in s_server so we accept connections
    from both ipv4 and ipv6 (#601612)
  - fix openssl speed command so it can be used in the FIPS mode
    with FIPS allowed ciphers


author: Tomas Mraz <tmraz@redhat.com> 1.0.0c-3
changelog:
  - add -x931 parameter to openssl genrsa command to use the ANSI X9.31
    key generation method
  - use FIPS-186-3 method for DSA parameter generation
  - add OPENSSL_FIPS_NON_APPROVED_MD5_ALLOW environment variable
    to allow using MD5 when the system is in the maintenance state
    even if the /proc fips flag is on
  - make openssl pkcs12 command work by default in the FIPS mode


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-3
changelog:
  - add support for VIA Padlock on 64bit arch from upstream (#617539)
  - do not return bogus values from load_certs (#652286)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-6
changelog:
  - add support for newest Intel acceleration improvements backported
    from upstream by Intel in form of a separate engine


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-7
changelog:
  - correct openssl cms help output (#636266)
  - more tolerant starttls detection in XMPP protocol (#608239)


author: Tomas Mraz <tmraz@redhat.com> 1.0.0d-8
changelog:
  - drop the separate engine for Intel acceleration improvements
    and merge in the AES-NI, SHA1, and RC4 optimizations
  - add support for OPENSSL_DISABLE_AES_NI environment variable
    that disables the AES-NI support


author: Tomas Mraz <tmraz@redhat.com> 1.0.0e-3
changelog:
  - do not use AVX instructions when osxsave bit not set
  - add direct known answer tests for SHA2 algorithms


author: Tomas Mraz <tmraz@redhat.com> 1.0.0g-1
changelog:
  - new upstream release fixing CVE-2012-0050 - DoS regression in
    DTLS support introduced by the previous release (#782795)


author: Tomas Mraz <tmraz@redhat.com> 1.0.1-0.1.beta2
changelog:
  - new upstream release from the 1.0.1 branch, ABI compatible
  - add documentation for the -no_ign_eof option


author: Tomas Mraz <tmraz@redhat.com> 1.0.1-0.2.beta3
changelog:
  - epoch bumped to 1 due to revert to 1.0.0g on Fedora 17
  - new upstream release from the 1.0.1 branch
  - fix s390x build (#798411)
  - versioning for the SSLeay symbol (#794950)
  - add -DPURIFY to build flags (#797323)
  - filter engine provides
  - split the libraries to a separate -libs package
  - add make to requires on the base package (#783446)


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-3
changelog:
  - fix DSA key generation in FIPS mode (#833866)
  - allow duplicate FIPS_mode_set(1)
  - enable build on ppc64 subarch (#834652)


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-4
changelog:
  - do not move libcrypto to /lib
  - do not use environment variables if __libc_enable_secure is on
  - fix strict aliasing problems in modes


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-7
changelog:
  - add missing initialization of str in aes_ccm_init_key (#853963)
  - add important patches from upstream CVS
  - use the secure_getenv() with new glibc


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-8
changelog:
  - use 1024 bit DH parameters in s_server as 512 bit is not allowed
    in FIPS mode and it is quite weak anyway


author: Tomas Mraz <tmraz@redhat.com> 1.0.1c-11
changelog:
  - add script for renewal of a self-signed cert by Philip Prindeville (#871566)
  - allow X509_issuer_and_serial_hash() produce correct result in
    the FIPS mode (#881336)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-20
changelog:
  - document the nextprotoneg option in manual pages
    original patch by Hubert Kario
  - try to avoid some races when updating the -fips subpackage


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-21
changelog:
  - make DTLS1 work in FIPS mode
  - avoid RSA and DSA 512 bits and Whirlpool in 'openssl speed' in FIPS mode
  - drop the -fips subpackage, installation of dracut-fips marks that the FIPS
    module is installed
  - avoid dlopening libssl.so from libcrypto
  - fix small memory leak in FIPS aes selftest
  - fix segfault in openssl speed hmac in the FIPS mode


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-24
changelog:
  - additional changes required for FIPS validation
  - disable verification of certificate, CRL, and OCSP signatures
    using MD5 if OPENSSL_ENABLE_MD5_VERIFY environment variable
    is not set


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-26
changelog:
  - fix CVE-2013-6449 - crash when version in SSL structure is incorrect
  - drop weak ciphers from the default TLS ciphersuite list
  - add back some symbols that were dropped with update to 1.0.1 branch
  - more FIPS validation requirement changes


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-28
changelog:
  - fix CVE-2013-4353 - Invalid TLS handshake crash
  - fix CVE-2013-6450 - possible MiTM attack on DTLS1


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-31
changelog:
  - print ephemeral key size negotiated in TLS handshake (#1057715)
  - add DH_compute_key_padded needed for FIPS CAVS testing
  - make expiration and key length changeable by DAYS and KEYLEN
    variables in the certificate Makefile (#1058108)
  - change default hash to sha256 (#1062325)
  - lower the actual 3des strength so it is sorted behind aes128 (#1056616)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-34.3
changelog:
  - fix CVE-2010-5298 - possible use of memory after free
  - fix CVE-2014-0195 - buffer overflow via invalid DTLS fragment
  - fix CVE-2014-0198 - possible NULL pointer dereference
  - fix CVE-2014-0221 - DoS from invalid DTLS handshake packet
  - fix CVE-2014-0224 - SSL/TLS MITM vulnerability
  - fix CVE-2014-3470 - client-side DoS when using anonymous ECDH


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-35
changelog:
  - fix CVE-2014-3505 - doublefree in DTLS packet processing
  - fix CVE-2014-3506 - avoid memory exhaustion in DTLS
  - fix CVE-2014-3507 - avoid memory leak in DTLS
  - fix CVE-2014-3508 - fix OID handling to avoid information leak
  - fix CVE-2014-3509 - fix race condition when parsing server hello
  - fix CVE-2014-3510 - fix DoS in anonymous (EC)DH handling in DTLS
  - fix CVE-2014-3511 - disallow protocol downgrade via fragmentation


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-37
changelog:
  - add support for RFC 5649 (#1119738)
  - do not pass the FIPS integrity check if the .hmac files are empty (#1128849)
  - add ECC TLS extensions to DTLS (#1119803)
  - do not send ECC ciphersuites in SSLv2 client hello (#1090955)
  - properly propagate encryption failure in BIO_f_cipher (#1072439)
  - fix CVE-2014-0224 fix that broke EAP-FAST session resumption support
  - improve documentation of ciphersuites - patch by Hubert Kario (#1108026)
  - use case insensitive comparison for servername in s_server (#1081163)
  - add support for automatic ECDH curve selection on server (#1080128)
  - FIPS mode: make the limitations on DSA, DH, and RSA keygen
    length enforced only if OPENSSL_ENFORCE_MODULUS_BITS environment
    variable is set


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-39
changelog:
  - fix CVE-2014-3567 - memory leak when handling session tickets
  - fix CVE-2014-3513 - memory leak in srtp support
  - add support for fallback SCSV to partially mitigate CVE-2014-3566
    (padding attack on SSL3)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-40
changelog:
  - use FIPS approved method for computation of d in RSA
  - copy digest algorithm when handling SNI context switch


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-41
changelog:
  - fix CVE-2014-3570 - incorrect computation in BN_sqr()
  - fix CVE-2014-3571 - possible crash in dtls1_get_record()
  - fix CVE-2014-3572 - possible downgrade of ECDH ciphersuite to non-PFS state
  - fix CVE-2014-8275 - various certificate fingerprint issues
  - fix CVE-2015-0204 - remove support for RSA ephemeral keys for non-export
    ciphersuites and on server
  - fix CVE-2015-0205 - do not allow unauthenticated client DH certificate
  - fix CVE-2015-0206 - possible memory leak when buffering DTLS records


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-42
changelog:
  - test in the non-FIPS RSA keygen for minimal distance of p and q
    similarly to the FIPS RSA keygen


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-44
changelog:
  - fix CVE-2015-0209 - potential use after free in d2i_ECPrivateKey()
  - fix CVE-2015-0286 - improper handling of ASN.1 boolean comparison
  - fix CVE-2015-0287 - ASN.1 structure reuse decoding memory corruption
  - fix CVE-2015-0288 - X509_to_X509_REQ NULL pointer dereference
  - fix CVE-2015-0289 - NULL dereference decoding invalid PKCS#7 data
  - fix CVE-2015-0292 - integer underflow in base64 decoder
  - fix CVE-2015-0293 - triggerable assert in SSLv2 server


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-46
changelog:
  - drop the AES-GCM restriction of 2^32 operations because the IV is
    always 96 bits (32 bit fixed field + 64 bit invocation field)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-47
changelog:
  - fix CVE-2015-4000 - prevent the logjam attack on client - restrict
    the DH key size to at least 768 bits (limit will be increased in future)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-48
changelog:
  - fix CVE-2015-3216 - regression in RAND locking that can cause segfaults on
    read in multithreaded applications


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-49
changelog:
  - fix CVE-2014-8176 - invalid free in DTLS buffering code
  - fix CVE-2015-1789 - out-of-bounds read in X509_cmp_time
  - fix CVE-2015-1790 - PKCS7 crash with missing EncryptedContent
  - fix CVE-2015-1791 - race condition handling NewSessionTicket
  - fix CVE-2015-1792 - CMS verify infinite loop with unknown hash function


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-50
changelog:
  - improved fix for CVE-2015-1791
  - add missing parts of CVE-2015-0209 fix for corectness although unexploitable


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-51.1
changelog:
  - fix CVE-2015-3194 - certificate verify crash with missing PSS parameter
  - fix CVE-2015-3195 - X509_ATTRIBUTE memory leak
  - fix CVE-2015-3196 - race condition when handling PSK identity hint


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-51.4
changelog:
  - fix CVE-2016-0702 - side channel attack on modular exponentiation
  - fix CVE-2016-0705 - double-free in DSA private key parsing
  - fix CVE-2016-0797 - heap corruption in BN_hex2bn and BN_dec2bn


author: Tomas Mraz <tmraz@redhat.com> 0.9.7f-1
changelog:
  - reenable optimizations on ppc64 and assembly code on ia64
  - upgrade to new upstream version (no soname bump needed)
  - disable thread test - it was testing the backport of the
    RSA blinding - no longer needed
  - added support for changing serial number to 
    Makefile.certificate (#151188)
  - make ca-bundle.crt a config file (#118903)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-9
changelog:
  - fix CVE-2007-3108 - side channel attack on private keys (#250581)
  - fix CVE-2007-5135 - off-by-one in SSL_get_shared_ciphers (#309881)
  - fix CVE-2007-4995 - out of order DTLS fragments buffer overflow (#321221)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8b-10
changelog:
  - compile with -march=z900 on s390 for performance improvements (#250818)
  - make ssl session ID matching strict (#233599)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-2
changelog:
  - more changes for FIPS validation (#444800)
  - correctly initialize default CA paths (#450987)
  - allow disabling zlib support through environment (#442624)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-5
changelog:
  - implement the integrity checking inside libcrypto so OpenSSL
    can be used in FIPS mode by the fipscheck library


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-8
changelog:
  - support multiple CRLs with same subject in a store (#457134)
  - fix CVE-2009-0590 - reject incorrectly encoded ASN.1 strings (#492304)
  - seed FIPS rng directly from kernel random device
  - do not require fipscheck to build the package (#475798)
  - call pairwise key tests in FIPS mode only (#479817)
  - do not crash when parsing bad mime data (#472440)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-12
changelog:
  - abort if selftests failed and random number generator is polled
  - mention EVP_aes and EVP_sha2xx routines in the manpages
  - add README.FIPS


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-13
changelog:
  - fix CVE-2009-2409 - drop MD2 algorithm from EVP tables (#510197)
  - fix CVE-2009-4355 - do not leak memory when CRYPTO_cleanup_all_ex_data()
    is called prematurely by application (#546707)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-14
changelog:
  - fix CVE-2009-3555 - support the safe renegotiation extension and
    do not allow legacy renegotiation on the server by default (#533125)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-15
changelog:
  - fix CVE-2010-0433 - do not pass NULL princ to krb5_kt_get_entry which
    in the RHEL-5 and newer versions will crash in such case (#569774)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-27
changelog:
  - fix for CVE-2013-0169 - SSL/TLS CBC timing attack (#907589)
  - fix for CVE-2013-0166 - DoS in OCSP signatures checking (#908052)
  - enable compression only if explicitly asked for or OPENSSL_DEFAULT_ZLIB
    environment variable is set (fixes CVE-2012-4929 #857051)
  - use secure_getenv() everywhere instead of getenv() (#839735)


author: Tomas Mraz <tmraz@redhat.com> 0.9.8e-29.3
changelog:
  - fix CVE-2015-0293 - triggerable assert in SSLv2 server
  - fix CVE-2015-3197 - SSLv2 ciphersuite enforcement
  - disable SSLv2 in the generic TLS method


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.4-2
changelog:
  - Reference authors from the project AUTHORS file instead of listing in description
  - Change Source0 to reference the project's Mercurial repo
  - Cleaned up the summaries and descriptions
  - Incorporate the results of Fedora package self-review


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.4-3
changelog:
  - Include an AUTHORS and license file in each package
  - Change the library package name to pacemaker-libs to be more
    Fedora compliant
  - Remove execute permissions from xml related files
  - Reference the new cluster-glue devel package name
  - Update the tarball from upstream to version c9120a53a6ae
    + High: PE: Only prevent migration if the clone dependancy is stopping/starting on the target node
    + High: PE: Bug 2160 - Dont shuffle clones due to colocation
    + High: PE: New implementation of the resource migration (not stop/start) logic
    + Medium: Tools: crm_resource - Prevent use-of-NULL by requiring a resource name for the -A and -a options
    + Medium: PE: Prevent use-of-NULL in find_first_action()
    + Low: Build: Include licensing files


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-0.4.c9120a53a6ae.hg
changelog:
  - Incorporate the feedback from the cluster-glue review
  - Realistically, the version is a 1.0.5 pre-release
  - Use the global directive instead of define for variables
  - Use the haclient/hacluster group/user instead of daemon
  - Use the _configure macro
  - Fix install dependancies


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-1
changelog:
  - Add dependancy on resource-agents
  - Use the version of the configure macro that supplies --prefix, --libdir, etc
  - Update the tarball from upstream to version 462f1569a437 (Pacemaker 1.0.5 final)
    + High: Tools: crm_resource - Advertise --move instead of --migrate
    + Medium: Extra: New node connectivity RA that uses system ping and attrd_updater
    + Medium: crmd: Note that dc-deadtime can be used to mask the brokeness of some switches


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-2
changelog:
  - Add versioned perl dependancy as specified by
      https://fedoraproject.org/wiki/Packaging/Perl#Packages_that_link_to_libperl
  - No longer remove RPATH data, it prevents us finding libperl.so and no other
    libraries were being hardcoded
  - Compile in support for heartbeat
  - Conditionally add heartbeat-devel and corosynclib-devel to the -devel requirements
    depending on which stacks are supported


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-4
changelog:
  - Include the fixes from CoroSync integration testing
  - Move the resource templates - they are not documentation
  - Ensure documentation is placed in a standard location
  - Exclude documentation that is included elsewhere in the package

  - Update the tarball from upstream to version ee19d8e83c2a
    + High: cib: Correctly clean up when both plaintext and tls remote ports are requested
    + High: PE: Bug bnc#515172 - Provide better defaults for lt(e) and gt(e) comparisions
    + High: PE: Bug lf#2197 - Allow master instances placemaker to be influenced by colocation constraints
    + High: PE: Make sure promote/demote pseudo actions are created correctly
    + High: PE: Prevent target-role from promoting more than master-max instances
    + High: ais: Bug lf#2199 - Prevent expected-quorum-votes from being populated with garbage
    + High: ais: Prevent deadlock - dont try to release IPC message if the connection failed
    + High: cib: For validation errors, send back the full CIB so the client can display the errors
    + High: cib: Prevent use-after-free for remote plaintext connections
    + High: crmd: Bug lf#2201 - Prevent use-of-NULL when running heartbeat
    + High: Core: Bug lf#2169 - Allow dtd/schema validation to be disabled
    + High: PE: Bug lf#2106 - Not all anonymous clone children are restarted after configuration change
    + High: PE: Bug lf#2170 - stop-all-resources option had no effect
    + High: PE: Bug lf#2171 - Prevent groups from starting if they depend on a complex resource which cannot
    + High: PE: Disable resource management if stonith-enabled=true and no stonith resources are defined
    + High: PE: Do not include master score if it would prevent allocation
    + High: ais: Avoid excessive load by checking for dead children every 1s (instead of 100ms)
    + High: ais: Bug rh#525589 - Prevent shutdown deadlocks when running on CoroSync
    + High: ais: Gracefully handle changes to the AIS nodeid
    + High: crmd: Bug bnc#527530 - Wait for the transition to complete before leaving S_TRANSITION_ENGINE
    + High: crmd: Prevent use-after-free with LOG_DEBUG_3
    + Medium: xml: Mask the "symmetrical" attribute on rsc_colocation constraints (bnc#540672)
    + Medium (bnc#520707): Tools: crm: new templates ocfs2 and clvm
    + Medium: Build: Invert the disable ais/heartbeat logic so that --without (ais|heartbeat) is available to rpmbuild
    + Medium: PE: Bug lf#2178 - Indicate unmanaged clones
    + Medium: PE: Bug lf#2180 - Include node information for all failed ops
    + Medium: PE: Bug lf#2189 - Incorrect error message when unpacking simple ordering constraint
    + Medium: PE: Correctly log resources that would like to start but cannot
    + Medium: PE: Stop ptest from logging to syslog
    + Medium: ais: Include version details in plugin name
    + Medium: crmd: Requery the resource metadata after every start operation


author: Andrew Beekhof <andrew@beekhof.net> - 1.0.5-5
changelog:
  - Include patch of changeset 66b7bfd467f3:
    Some clients such as gfs_controld want a cluster name, allow one to be specified in corosync.conf


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.1-0.1-60b7753f7310.hg
changelog:
  - Update the tarball from upstream to version 60b7753f7310
    + First public release of the 1.1 series


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.2-1
changelog:
  - Update the tarball from the upstream 1.1.2 release
    + High: ais: Bug lf#2340 - Force rogue child processes to terminate after waiting 2.5 minutes
    + High: ais: Bug lf#2359 - Default expected votes to 2 inside Corosync/OpenAIS plugin
    + High: ais: Bug lf#2359 - expected-quorum-votes not correctly updated after membership change
    + High: ais: Bug rhbz#525552 - Move non-threadsafe calls to setenv() to after the fork()
    + High: ais: Do not count votes from offline nodes and calculate current votes before sending quorum data
    + High: ais: Ensure the list of active processes sent to clients is always up-to-date
    + High: ais: Fix previous commit, actually return a result in get_process_list()
    + High: ais: Fix two more uses of getpwnam() in non-thread-safe locations
    + High: ais: Look for the correct conf variable for turning on file logging
    + High: ais: Need to find a better and thread-safe way to set core_uses_pid. Disable for now.
    + High: ais: Use the threadsafe version of getpwnam
    + High: Core: Bug lf#2414 - Prevent use-after-free reported by valgrind when doing xpath based deletions
    + High: Core: Bump the feature set due to the new failcount expiry feature
    + High: Core: Fix memory leak in replace_xml_child() reported by valgrind
    + High: Core: fix memory leaks exposed by valgrind
    + High: crmd: Bug 2401 - Improved detection of partially active peers
    + High: crmd: Bug bnc#578644 - Improve handling of cancelled operations caused by resource cleanup
    + High: crmd: Bug lf#2379 - Ensure the cluster terminates when the PE is not available
    + High: crmd: Bug lf#2414 - Prevent use-after-free of the PE connection after it dies
    + High: crmd: Bug lf#2414 - Prevent use-after-free of the stonith-ng connection
    + High: crmd: Do not allow the target_rc to be misused by resource agents
    + High: crmd: Do not ignore action timeouts based on FSA state
    + High: crmd: Ensure we dont get stuck in S_PENDING if we loose an election to someone that never talks to us again
    + High: crmd: Fix memory leaks exposed by valgrind
    + High: crmd: Remove race condition that could lead to multiple instances of a clone being active on a machine
    + High: crmd: Send erase_status_tag() calls to the local CIB when the DC is fenced, since there is no DC to accept them
    + High: crmd: Use global fencing notifications to prevent secondary fencing operations of the DC
    + High: fencing: Account for stonith_get_info() always returning a pointer to the same static buffer
    + High: PE: Allow startup probes to be disabled - their calculation is a major bottleneck for very large clusters
    + High: PE: Bug lf#2317 - Avoid needless restart of primitive depending on a clone
    + High: PE: Bug lf#2358 - Fix master-master anti-colocation
    + High: PE: Bug lf#2361 - Ensure clones observe mandatory ordering constraints if the LHS is unrunnable
    + High: PE: Bug lf#2383 - Combine failcounts for all instances of an anonymous clone on a host
    + High: PE: Bug lf#2384 - Fix intra-set colocation and ordering
    + High: PE: Bug lf#2403 - Enforce mandatory promotion (colocation) constraints
    + High: PE: Bug lf#2412 - Correctly locate clone instances by their prefix
    + High: PE: Correctly implement optional colocation between primitives and clone resources
    + High: PE: Do not be so quick to pull the trigger on nodes that are coming up
    + High: PE: Fix memory leaks exposed by valgrind
    + High: PE: Fix memory leaks reported by valgrind
    + High: PE: Repair handling of unordered groups in RHS ordering constraints
    + High: PE: Rewrite native_merge_weights() to avoid Fix use-after-free
    + High: PE: Suppress duplicate ordering constraints to achieve orders of magnitude speed increases for large clusters
    + High: Shell: add support for xml in cli
    + High: Shell: always reload status if working with the cluster (bnc#590035)
    + High: Shell: check timeouts also against the default-action-timeout property
    + High: Shell: Default to using the status section from the live CIB (bnc#592762)
    + High: Shell: edit multiple meta_attributes sets in resource management (lf#2315)
    + High: Shell: enable comments (lf#2221)
    + High: Shell: implement new cibstatus interface and commands (bnc#580492)
    + High: Shell: improve configure commit (lf#2336)
    + High: Shell: new cibstatus import command (bnc#585471)
    + High: Shell: new configure filter command
    + High: Shell: restore error reporting in options
    + High: Shell: split shell into modules
    + High: Shell: support for the utilization element (old patch for the new structure)
    + High: Shell: update previous node lookup procedure to include the id where necessary
    + High: Tools: crm_mon - fix memory leaks exposed by valgrind


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.2-2
changelog:
  - Resolves rhbz#602239 - Added patch to documentation so that it passes validation
  - High: Core: Bug lf#2401 - Backed out changeset 6e6980376f01


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.3-0.1-b3cb4f4a30ae.hg
changelog:
  - Pre-release version of 1.1.3
    + High: ais: Bug lf2401 - Improved processing when the peer crmd processes join/leave
    + High: ais: fix list of active processes sent to clients (bnc#603685)
    + High: ais: Move the code for finding uid before the fork so that the child does no logging
    + High: ais: Resolve coverity CONSTANT_EXPRESSION_RESULT defects
    + High: cib: Also free query result for xpath operations that return more than one hit
    + High: cib: Attempt to resolve memory corruption when forking a child to write the cib to disk
    + High: cib: Correctly free memory when writing out the cib to disk
    + High: cib: Fix the application of unversioned diffs
    + High: cib: Remove old developmental error logging
    + High: cib: Restructure the 'valid peer' check for deciding which instructions to ignore
    + High: Core: Bug lf#2401 - Backed out changeset 6e6980376f01
    + High: Core: Correctly unpack HA_Messages containing multiple entries with the same name
    + High: Core: crm_count_member() should only track nodes that have the full stack up
    + High: Core: New developmental logging system inspired by the kernel and a PoC from Lars Ellenberg
    + High: crmd: All nodes should see status updates, not just he DC
    + High: crmd: Allow non-DC nodes to clear failcounts too
    + High: crmd: Base DC election on process relative uptime
    + High: crmd: Bug lf#2439 - cancel_op() can also return HA_RSCBUSY
    + High: crmd: Bug lf#2439 - Handle asynchronous notification of resource deletion events
    + High: crmd: Fix assertion failure when performing async resource failures
    + High: crmd: Fix handling of async resource deletion results
    + High: crmd: Include the action for crm graph operations
    + High: crmd: Make sure the membership cache is accurate after a sucessful fencing operation
    + High: crmd: Make sure we always poke the FSA after a transition to clear any TE_HALT actions
    + High: crmd: Offer crm-level membership once the peer starts the crmd process
    + High: crmd: Only need to request quorum update for plugin based clusters
    + High: crmd: Prevent everyone from loosing DC elections by correctly initializing all relevant variables
    + High: crmd: Prevent segmentation fault
    + High: crmd: several fixes for async resource delete
    + High: mcp: Add missing headers when built without heartbeat support
    + High: mcp: New master control process for (re)spawning pacemaker daemons
    + High: PE: Avoid creating invalid ordering constraints for probes that are not needed
    + High: PE: Bug lf#1959 - Fail unmanaged resources should not prevent other services from shutting down
    + High: PE: Bug lf#2422 - Ordering dependencies on partially active groups not observed properly
    + High: PE: Bug lf#2424 - Use notify oepration definition if it exists in the configuration
    + High: PE: Bug lf#2433 - No services should be stopped until probes finish
    + High: PE: Bug lf#2453 - Enforce clone ordering in the absense of colocation constraints
    + High: PE: Correctly detect when there is a real failcount that expired and needs to be cleared
    + High: PE: Correctly handle pseudo action creation
    + High: PE: Correctly order clone startup after group/clone start
    + High: PE: Fix colocation for interleaved clones
    + High: PE: Fix colocation with partially active groups
    + High: PE: Fix potential use-after-free defect from coverity
    + High: PE: Fix previous merge
    + High: PE: Fix use-after-free in order_actions() reported by valgrind
    + High: PE: Prevent endless loop when looking for operation definitions in the configuration
    + High: Resolve coverity RESOURCE_LEAK defects
    + High: Shell: Complete the transition to using crm_attribute instead of crm_failcount and crm_standby
    + High: stonith: Advertise stonith-ng options in the metadata
    + High: stonith: Correctly parse pcmk_host_list parameters that appear on a single line
    + High: stonith: Map poweron/poweroff back to on/off expected by the stonith tool from cluster-glue
    + High: stonith: pass the configuration to the stonith program via environment variables (bnc#620781)
    + High: Support starting plugin-based Pacemaker clusters with the MCP as well
    + High: tools: crm_report - corosync.conf wont necessarily contain the text 'pacemaker' anymore
    + High: tools: crm_simulate - Resolve coverity USE_AFTER_FREE defect
    + High: Tools: Drop the 'pingd' daemon and resource agent in favor of ocf:pacemaker:ping
    + High: Tools: Fix recently introduced use-of-NULL
    + High: Tools: Fix use-after-free defect from coverity


author: Andrew Beekhof <andrew@beekhof.net> - 1.1.3-1
changelog:
  - Upstream release of 1.1.3
    + High: crmd: Use the correct define/size for lrm resource IDs
    + High: crmd: Bug lf#2458 - Ensure stop actions always have the relevant resource attributes
    + High: crmd: Ensure we activate the DC timer if we detect an alternate DC
    + High: mcp: Correctly initialize the string containing the list of active daemons
    + High: mcp: Fix the expansion of the pid file in the init script
    + High: mcp: Tell chkconfig we need to shut down early on
    + High: PE: Bug lf#2476 - Repair on-fail=block for groups and primitive resources
    + High: PE: Do not demote resources because something that requires it can't run
    + High: PE: Rewrite the ordering constraint logic to be simplicity, clarity and maintainability
    + High: PE: Wait until stonith is available, don't fall back to shutdown for nodes requesting termination
    + High: PE: Prevent segfault by ensuring the arguments to do_calculations() are initialized
    + High: stonith: Bug lf#2461 - Prevent segfault by not looking up operations if the hashtable hasn't been initialized yet
    + High: Stonith: Bug lf#2473 - Ensure stonith operations complete within the timeout and are terminated if they run too long
    + High: stonith: Bug lf#2473 - Gracefully handle remote operations that arrive late (after we've done notifications)
    + High: stonith: Bug lf#2473 - Add the timeout at the top level where the daemon is looking for it
    + High: stonith: Bug lf#2473 - Ensure timeouts are included for fencing operations
    + High: Stonith: Use the timeout specified by the user
    + High: Tools: Bug lf#2456 - Fix assertion failure in crm_resource


author: Andrew Beekhof <andrew@beekhof.net> 1.1.4-1
changelog:
  - Upstream release of 1.1.4
  - See included ChangeLog file or http://hg.clusterlabs.org/pacemaker/1.1/file/tip/ChangeLog for details


author: Andrew Beekhof <andrew@beekhof.net> 1.1.6-1
changelog:
  - Upstream release of 1.1.6
  - See included ChangeLog file or http://hg.clusterlabs.org/pacemaker/1.1/file/tip/ChangeLog for details

  - Disabled eSMTP and SNMP support.  Painful to configure and rarely used.
  - Created cli sub-package for non-cluster usage


author: Andrew Beekhof <andrew@beekhof.net> 1.1.6-2
changelog:
  - Do not build in support for heartbeat, snmp, esmtp by default
  - Create a package for cluster unaware libraries to minimze our
    footprint on non-cluster nodes
  - Better package descriptions


author: Andrew Beekhof <andrew@beekhof.net> 1.1.7-0.1-bc7c125.git
changelog:
  - New upstream tarball: bc7c125
  - Pre-release 1.1.7 build to deal with the removal of cman and support for corosync plugins
  - Add libqb as a dependancy


author: Andrew Beekhof <andrew@beekhof.net> 1.1.7-0.3-7742926.git
changelog:
  - New upstream tarball: 7742926
  - Additional Provides and Obsoletes directives to enable upgrading from heartbeat
  - Rebuild now that the Corosync CFG API has been removed


author: Andrew Beekhof <andrew@beekhof.net> Pacemaker-1.1.7-1
changelog:
  - Update source tarball to upstream release: Pacemaker-1.1.7
  - See included ChangeLog file or https://raw.github.com/ClusterLabs/pacemaker/master/ChangeLog for details


author: Andrew Beekhof <andrew@beekhof.net> 1.1.8-1
changelog:
  - Rebuild for upstream 1.1.8 release
  - Documentation disabled pending a functional publican/ImageMagick combination

  - Statistics:
    Changesets: 1019
    Diff:       2107 files changed, 117258 insertions(+), 73606 deletions(-)

  - See included ChangeLog file or https://raw.github.com/ClusterLabs/pacemaker/master/ChangeLog for full details

    + New IPC implementation from libqb
    + New logging implementation from libqb
    + Quieter - info, debug and trace logs are no longer sent to syslog
    + Dropped dependancy on cluster-glue
    + Config and core directories no longer located in heartbeat directories
    + Support for managing systemd services
    + Rewritten local resource management daemon
    + Version bumps for every shared library due to API cleanups
    + Removes crm shell, install/use pcs shell and GUI instead


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.8-4
changelog:
  - Update for new upstream tarball: 5db5f53

    + High: mcp: Re-attach to existing pacemaker components when pacemakerd fails
    + High: pengine: cl#5111 - When clone/master child rsc has on-fail=stop, insure all children stop on failure.
    + High: Replace the use of the insecure mktemp(3) with mkstemp(3)
    + High: Core: Correctly process XML diff's involving element removal
    + High: PE: Correctly unpack active anonymous clones
    + High: PE: Fix clone_zero() and clone_strip() for single character resource names
    + High: IPC: Bug cl#5110 - Prevent 100% CPU usage when looking for synchronous replies
    + High: PE: Bug cl#5101 - Ensure stop order is preserved for partially active groups
    + High: fencing: On failure, only try a topology device once from the remote level.
    + High: fencing: Retry stonith device for duration of action's timeout period.
    + High: PE: Fix memory leak on processing message (bnc#780224)
    + High: fencing: Support 'on_target' option in fencing device metadata for forcing unfence on target node
    + High: PE: Support resources that require unfencing before start
    + High: PE: Support a 'requires' resource meta-attribute for controlling whether it needs quorum, fencing or nothing
    + High: mcp: Only define HA_DEBUGLOG to avoid agent calls to ocf_log printing everything twice
    + High: fencing: Do not start fencing until entire device topology is found or query results timeout.
    + High: Cluster: Allow cman and corosync 2.0 nodes to use a name other than uname()


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-1
changelog:
  - Update for new upstream tarball: Pacemaker-1.1.10-rc1
  - Features added since Pacemaker-1.1.8
    + Performance enhancements for supporting 16 node clusters
    + corosync: Use queues to avoid blocking when sending CPG messages
    + ipc: Compress messages that exceed the configured IPC message limit
    + ipc: Use queues to prevent slow clients from blocking the server
    + ipc: Use shared memory by default
    + lrmd: Support nagios remote monitoring
    + lrmd: Pacemaker Remote Daemon for extending pacemaker functionality outside corosync cluster.
    + pengine: Check for master/slave resources that are not OCF agents
    + pengine: Support a 'requires' resource meta-attribute for controlling whether it needs quorum, fencing or nothing
    + pengine: Support for resource containers
    + pengine: Support resources that require unfencing before start

  - Changes since Pacemaker-1.1.8
    + attrd: Correctly handle deletion of non-existant attributes
    + Bug cl#5135 - Improved detection of the active cluster type
    + Bug rhbz#913093 - Use crm_node instead of uname
    + cib: Prevent ordering changes when applying xml diffs
    + cib: Remove text nodes from cib replace operations
    + crmd: Prevent election storms caused by getrusage() values being too close
    + date/time: Bug cl#5118 - Correctly convert seconds-since-epoch to the current time
    + fencing: Attempt to provide more information that just 'generic error' for failed actions
    + fencing: Correctly record completed but previously unknown fencing operations
    + fencing: Correctly terminate when all device options have been exhausted
    + fencing: cov#739453 - String not null terminated
    + fencing: Do not merge new fencing requests with stale ones from dead nodes
    + fencing: Do not start fencing until entire device topology is found or query results timeout.
    + fencing: Do not wait for the query timeout if all replies have arrived
    + fencing: Fix passing of parameters from CMAN containing '='
    + fencing: Fix non-comparison when sorting devices by priority
    + fencing: On failure, only try a topology device once from the remote level.
    + fencing: Only try peers for non-topology based operations once
    + fencing: Retry stonith device for duration of action's timeout period.
    + ipc: Bug cl#5110 - Prevent 100% CPU usage when looking for synchronous replies
    + mcp: Re-attach to existing pacemaker components when mcp fails
    + pengine: Any location constraint for the slave role applies to all roles
    + pengine: Bug cl#5101 - Ensure stop order is preserved for partially active groups
    + pengine: Bug cl#5140 - Allow set members to be stopped when the subseqent set has require-all=false
    + pengine: Bug cl#5143 - Prevent shuffling of anonymous master/slave instances
    + pengine: Bug rhbz#880249 - Ensure orphan masters are demoted before being stopped
    + pengine: Bug rhbz#880249 - Teach the PE how to recover masters into primitives
    + pengine: cl#5025 - Automatically clear failcount for start/monitor failures after resource parameters change
    + pengine: cl#5099 - Probe operation uses the timeout value from the minimum interval monitor by default (#bnc776386)
    + pengine: cl#5111 - When clone/master child rsc has on-fail=stop, insure all children stop on failure.
    + pengine: cl#5142 - Do not delete orphaned children of an anonymous clone
    + pengine: Correctly unpack active anonymous clones
    + pengine: Ensure previous migrations are closed out before attempting another one
    + pengine: rhbz#902459 - Remove rsc node status for orphan resources
    + Replace the use of the insecure mktemp(3) with mkstemp(3)


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-2
changelog:
  - Update for new upstream tarball: Pacemaker-1.1.10-rc4

  - Features in Pacemaker-1.1.10-rc4:
    + PE: Display a list of nodes on which stopped anonymous clones are not active instead of meaningless clone IDs
    + crm_error: Add the ability to list and print error symbols
    + crm_resource: Implement --ban for moving resources away from nodes and --clear (replaces --unmove)
    + crm_resource: Support OCF tracing when using --force-(check|start|stop)

  - Changes since Pacemaker-1.1.10-rc1

    + Bug cl#5133 - pengine: Correctly observe on-fail=block for failed demote operation
    + Bug cl#5152 - Correctly clean up fenced nodes during membership changes
    + Bug cl#5153 - Correctly display clone failcounts in crm_mon
    + Bug cl#5154 - Do not expire failures when on-fail=block is present
    + Bug pengine: cl#5155 - Block the stop of resources if any depending resource is unmanaged
    + crm_report: Correctly collect logs when 'uname -n' reports fully qualified names
    + Check for and replace non-printing characters with their octal equivalent while exporting xml text
    + Convert all exit codes to positive errno values
    + Core: Ensure the blackbox is saved on abnormal program termination
    + corosync: Detect the loss of members for which we only know the nodeid
    + corosync: Nodes that can persist in sending CPG messages must be alive afterall
    + crmd: Do not get stuck in S_POLICY_ENGINE if a node we couldn't fence returns
    + crmd: Ensure all membership operations can complete while trying to cancel a transition
    + crmd: Everyone who gets a fencing notification should mark the node as down
    + crmd: Initiate node shutdown if another node claims to have successfully fenced us
    + crm_resource: Gracefully fail when --force-* is attempted for stonith resources
    + fencing: Restore the ability to manually confirm that fencing completed
    + pengine: Correctly handle resources that recover before we operate on them
    + pengine: Ensure per-node resource parameters are used during probes
    + pengine: Implement the rest of get_timet_now() and rename to get_effective_time
    + pengine: Mark unrunnable stop actions as "blocked"
    + pengine: Re-initiate active recurring monitors that previously failed but have timed out
    + xml: Restore the ability to embed comments in the cib


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-3
changelog:
  - Update to upstream 838e41e

    + Feature: pengine: Allow active nodes in our current membership to be fenced without quorum
    + Fix: attrd: Fixes deleted attributes during dc election
    + Fix: corosync: Fall back to uname for local nodes
    + Fix: crm_report: Find logs in compressed files
    + Fix: pengine: If fencing is unavailable or disabled, block further recovery for resources that fail to stop
    + Fix: systemd: Ensure we get shut down correctly by systemd


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-5
changelog:
  - Streamline spec file

  - Upstream patch for:
    + cman: Only build migration tools for targets that may use them
    + cib: Ensure we set up hacluster's groups in stand-alone mode

  - Update for new upstream tarball: Pacemaker-1.1.10-rc7

    + Bug cl#5157 - Allow migration in the absence of some colocation constraints
    + Bug cl#5168 - Prevent clones from being bounced around the cluster due to location constraints
    + Bug cl#5170 - Correctly support on-fail=block for clones
    + crmd: CID#1036761 Dereference null return value
    + crmd: cl#5164 - Fixes crmd crash when using pacemaker-remote
    + crmd: Ensure operations for cleaned up resources don't block recovery
    + crmd: Prevent messages for remote crmd clients from being relayed to wrong daemons
    + crmd: Properly handle recurring monitor operations for remote-node agent
    + fencing: Correctly detect existing device entries when registering a new one
    + logging: If SIGTRAP is sent before tracing is turned on, turn it on
    + lrmd: Prevent use-of-NULL in client library
    + pengine: cl#5128 - Support maintenance mode for a single node
    + pengine: cl#5164 - Pengine segfault when calculating transition with remote-nodes.
    + pengine: Do the right thing when admins specify the internal resource instead of the clone
    + systemd: Turn off auto-respawning of systemd services when the cluster starts them


author: Andrew Beekhof <andrew@beekhof.net> Pacemaker-1.1.10-6
changelog:
  - Update source tarball to revision: 368c726 (Pacemaker-1.1.10-rc7)
  - Changesets: 18
  - Diff:       9 files changed, 245 insertions(+), 170 deletions(-)

  - Features added since Pacemaker-1.1.10-rc7
    + crm_resource: Allow options to be set recursively

  - Changes since Pacemaker-1.1.10-rc7
    + Bug cl#5161 - crmd: Prevent memory leak in operation cache
    + cib: Correctly read back archived configurations if the primary is corrupted


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-10
changelog:
  + Fix: pengine: Do not re-allocate clone instances that are blocked in the Stopped state
    + Fix: pengine: Do not allow colocation with blocked clone instances


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-11
changelog:
  + Fix: systemd: Prevent glib assertion - only call g_error_free() with non-NULL arguments
    + Fix: systemd: Prevent additional assertions in g_error_free
    + Fix: logging: glib CRIT messages should not produce core files by default
    + Doc: controld: Update the description
    + Fix: pengine: Correctly account for the location preferences of things colocated with a group
    + Fix: cib: Correctly log short-form xml diffs
    + Fix: crmd: Correcty update the history cache when recurring ops change their return code
    + Log: pengine: Better indicate when a resource has failed
    + Log: crm_mon: Unmunge the output for failed operations


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-13
changelog:
  + Fencing: Support agents that need the host to be unfenced at startup
      Resolves: rhbz#996576
    + crm_report: Collect corosync quorum data
      Resolves: rhbz#839342


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-14
changelog:
  + Fix: xml: Location constraints are allowed to specify a role
    + Bug rhbz#902407 - crm_resource: Handle --ban for master/slave resources as advertised
      Resolves: rhbz#902407


author: David Vossel <dvossel@redhat.com> - 1.1.10-15
changelog:
  + Fix: crmd: Allow transient attributes to be set on remote-nodes.
    + Fix: pengine: Handle orphaned remote-nodes properly
    + Low: cts: Add RemoteLXC regression test.

    Resolves: rhbz#1006465
    Resolves: rhbz#1006471


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-16
changelog:
  - Remove unsupported resource agent
  - Log: crmd: Supply arguments in the correct order
  - Fix: crm_report: Correctly redirect error message to /dev/null
  - Fix: Bug rhbz#1011618 - Consistently use 'Slave' as the role for unpromoted master/slave resources
  - Fix: pengine: Location constraints with role=Started should prevent masters from running at all
  - Fix: crm_resource: Observe --master modifier for --move
  - Provide a meaningful error if --master is used for primitives and groups
  - Fix: Fencing: Observe pcmk_host_list during automatic unfencing
      Resolves: rhbz#996576


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-17
changelog:
  Resolves: rhbz#720543

  - Fix: core: Do not enabled blackbox for cli tools
  - Fix: Command-line tools should stop after an assertion failure
  - Fix: crmd: Dont add node_state to cib, if we have not seen or fenced this node yet
  - Fix: crmd: Correctly update expected state when the previous DC shuts down
  - Fix: crmd: Cache rsc_info retrieved from lrmd and pacemaker_remoted
  - Fix: crmd: Pad internal lrmd rsc_info and metadata retrieval timeout
  - Fix: crm_attribute: Detect orphaned remote-nodes when setting attributes
  - Fix: crm_mon: Prevent use-of-NULL when ping resources do not define a host list
  - Fix: crm_report: Record the output of the collector
  - Fix: crm_report: Do not print garbage when collecting from the local node
  - Fix: crm_resource: Wait for all replies when cleaning up resources
  - Fix: fencing: Do not broadcast suicide if the on action is being executed
  - Fix: fencing: Allow fencing for node after topology entries are deleted
  - Fix: fencing: Deep copy current topology level list on remote op
  - Fix: lrmd: Correctly cancel monitor actions for lsb/systemd/service resources on cleaning up
  - Fix: pengine: Dont prevent clones from running due to dependant resources
  - Fix: pengine: Probe containers not expected to be up
  - Fix: ipc: Raise the default buffer size to 128k
  - Fix: ipc: Use the higher of the configured buffer size or the default
  - Fix: iso8601: Prevent dates from jumping backwards a day in some timezones
  - Fix: remote: Properly version the remote connection protocol
  - Fix: remote: Handle endian changes between client and server and improve forward compatibility
      Resolves: rhbz#720543


author: David Vossel <dvossel@redhat.com> - 1.1.10-19
changelog:
  - Fix: controld: Use the correct variant of dlm_controld for
    corosync-2 clusters

      Resolves: rhbz#1028627


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-20
changelog:
  - Fix: tools: Fixes formatting of remote-nodes in crm_mon and crm_simulate
  - Fix: Corosync: Attempt to retrieve a peers node name if it is not already known
      Resolves: rhbz#720543


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-23
changelog:
  - mcp: Tell systemd not to respawn us if we return 100
  - services: Detect missing agents and permission errors before forking
  - Use native DBus library for systemd support to avoid problematic use of threads
      Resolves: rhbz#720543 (aka. 1057697)


author: David Vossel <dvossel@redhat.com> - 1.1.10-24
changelog:
  - controld: handling startup fencing within the controld agent, not the dlm
      Resolves: rhbz#1064519
  - controld: Do not consider the dlm up until the address list is present
      Resolves: rhbz#1067536


author: David Vossel <dvossel@redhat.com> - 1.1.10-25
changelog:
  - pengine: cl#5187 - Prevent resources in an anti-colocation from even temporarily running on a same node
      Resolves: rhbz#1069284


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-26
changelog:
  - Run automated regression tests after every build
  - Fencing: Send details of stonith_api_time() and stonith_api_kick() to syslog
  - Fencing: Pass the correct options when looking up the history by node name
  - Fencing: stonith_api_time_helper now returns when the most recent fencing operation completed
  - crm_report: Additional dlm detail if dlm_controld is running
  - crmd: Gracefully handle actions that cannot be initiated
  - pengine: Gracefully handle bad values for XML_ATTR_TRANSITION_MAGIC
      Resolves: rhbz#1070916


author: Andrew Beekhof <beekhof@redhat.com> - 1.1.10-27
changelog:
  - crm_resource: Prevent use-of-NULL
  - systemd: Prevent use-of-NULL when determining if an agent exists
  - Fencing: Remove shadow definition and use of variable 'progress'
      Resolves: rhbz#1070916


author: David Vossel <dvossel@redhat.com> - 1.1.10-28
changelog:
  - pengine: fixes invalid transition caused by clones with more than 10 instances
      Resolves: rhbz#1078504


author: Andrew Beekhof <abeekhof@redhat.com> 1.1.10-30
changelog:
  - crmd: Do not erase the status section for unfenced nodes
  - crmd: Correctly react to successful unfencing operations
  - crmd: Report unsuccessful unfencing operations
  - crmd: Do not overwrite existing node state when fencing completes
  - fencing: Correctly record which peer performed the fencing operation
  - fencing: Automatically switch from 'list' to 'status' to 'static-list' if those actions are not advertised in the metadata
  - fencing: Filter self-fencing at the peers to allow unfencing to work correctly
  - pengine: Automatically re-unfence a node if the fencing device definition changes
  - pengine: Fencing devices default to only requiring quorum in order to start
  - pengine: Delay unfencing until after we know the state of all resources that require unfencing
  - pengine: Ensure unfencing occurs before fencing devices are (re-)probed
  - pengine: Ensure unfencing only happens once, even if the transition is interrupted
  - pengine: Do not unfence nodes that are offline, unclean or shutting down
  - pengine: Unfencing is based on device probes, there is no need to unfence when normal resources are found active
  - logging: daemons always get a log file, unless explicitly set to configured 'none'
  - lrmd: Expose logging variables expected by OCF agents
  - crm_report: Suppress logging errors after the target directory has been compressed
  - crm_resource: Wait for the correct number of replies when cleaning up resources
      Resolves: rhbz#1078078


author: David Vossel <dvossel@redhat.com> - 1.1.10-31
changelog:
  - fencing: Fence using all required devices
  - fencing: Execute all required fencing devices regardless of what topology level they are at
  - fencing: default to 'off' when agent does not advertise 'reboot' in metadata
      Resolves: rhbz#1078078


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.10-32
changelog:
  - Fix: lrmd: Handle systemd reporting 'done' before a resource is actually stopped
      Resolves: rhbz#1111747


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.12-5
changelog:
  - Update patch level to upstream 031e46c
    - Prevent glib assert triggered by timers being removed from mainloop more than once 
    - Allow rsc discovery to be disabled in certain situations
    - Allow remote-nodes to be placed in maintenance mode
    - Improved sbd integration


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.12-9
changelog:
  - Update patch level to upstream fb94901
  - Prevent blocking by performing systemd reloads asynchronously


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.12-10
changelog:
  - Update patch level to upstream 98b6688
  - Support an intelligent resource restart operation
  - Exclusive discovery implies running the resource is only possible on the listed nodes


author: Andrew Beekhof <abeekhof@redhat.com> - 1.1.12-11
changelog:
  - Update patch level to upstream 7dd9022
  - Ensure all internal caches are updated when nodes are removed from the cluster
    Resolves: rhbz#1162727


